Originally Posted by ks2hot4u

Request: Bell canada firmware, this would be impressive.

Sent from my MB860

I'll second that.........lol

Originally Posted by dillfever

I'll second that.........lol

Third that!

Originally Posted by Pzyduck

Be sure to set Android USB debugging mode on your device to OFF. Then make sure you have the latest Moto drivers installed on your machine. If you can connect to Motorola Software Update using Windows OS and try to run a software update--- it will not succeed because there is no update for Hong Kong.
When it searches for an update it will store the necessary info in a file called MSU.txt in the Motorola Software Update program directory. Then you can find the flex version.

Credits: daywalker04

Thanks for your instruction, I followed the steps, the MSU.txt is there, but still couldn't find the path /system/etc/motorola/bp_nvm_default/File_GSM, the only file I found which you mentioned before is a file named flex, it located in /system/etc/motorola/com.motorola.android.fota, is that it?

you would use these firmware files with RSDLite as described here: http://forum.xda-developers.com/showthread.php?t=991072

right?

@Joooom UnreadIf there version of Flex, I say that I found

@xoppaw Yes

Originally Posted by Joooom

Thanks for your instruction, I followed the steps, the MSU.txt is there, but still couldn't find the path /system/etc/motorola/bp_nvm_default/File_GSM, the only file I found which you mentioned before is a file named flex, it located in /system/etc/motorola/com.motorola.android.fota, is that it?

If the path "/system/etc/motorola/bp_nvm_default/File_GSM" is not found on your device, the information needed will be found in plain text inside a file called "MSU.txt" on your PC once you try to update your phone using the program Motorola Software Update.

Here's an example:

06/05/11 13:49:55 IMEI: XXXXXXXXXXXXXXX
06/05/11 13:49:55 Technology: UMTS 3G
06/05/11 13:49:55 Flex File: USAOLYP01TMUKEU049.0R
06/05/11 13:49:55 Software: OLYEM_U4_2.2.3
06/05/11 13:49:55 PRI:
06/05/11 13:49:55 Kjava:
06/05/11 13:49:55 BootLoader: 0007
06/05/11 13:49:55 LangPack:
06/05/11 13:49:55 Internal Carrier Name: N / A
06/05/11 13:49:55 Carrier Name: N / A
06/05/11 13:49:55 Model Number: N / A
06/05/11 13:49:55 AP Setup Flex:
06/05/11 13:49:55 AP Resource Flex:
06/05/11 13:49:55 AP Logo Flex:
06/05/11 13:49:55 AP Secure Setup Flex:
06/05/11 13:49:55 AP ROFS:
06/05/11 13:49:55 AP ROFSExtension:
06/05/11 13:49:55 AP Flex: GAS_EMEA_USAOLYPTMGB_P021

Originally Posted by dillfever

I'll second that.........lol

The "MSU.txt" trick didn't work for Bell ATRIX because it yields an incomplete flex name like "00D.0R" , which frankly doesn't help much.

If you could somehow dump your Radio CG5 it would help a lot.

I don't need it be "flashable" and I don't need to split it, I just need that code group dumped -- preferrably in .smg format. That will contain the most crucial info.

Originally Posted by daywalker04

The "MSU.txt" trick didn't work for Bell ATRIX because it yields an incomplete flex name like "00D.0R" , which frankly doesn't help much.

I've uploaded the MSU.txt in my first post, however, I think we got the same case as Bell Atrix, I can see the flex name "041.0R", it won't help a lot.

Originally Posted by Pzyduck

@Joooom UnreadIf there version of Flex, I say that I found

@xoppaw Yes

worked like a dream....it's nice to be able to sbf directly to 1.83

Hi guys, I have two questions about firmwares. I have an Atrix by AT&T and I would know if I can flash the french firmware or the UK ones and what are the differences between the service firmware and the full ones. Thank you.

I'm sorry for my questions but I'm a very very newbie