could someone tell me what is this and what value it have.... that i have missing on pcb of mi tg01

Unfortunately, I dissasemble my TG01 2 days ago. If I dissasemble it apart soon, I would look.

Mine Too!

---

My TG01 has just started to do exactly the same thing
I have to wiggle the USB charger vigorously in the jack just to get it to charge, and it always drops the connection halfway through syncing when connected to the copmuter

I'm thinking about opening it up and taking a closer look at the connector, I just want my TG01 back to normal again Maybe I'll even try replacing the jack using some parts off ebay depends if the jack looks loose

I'll open it up some-point this weekend and take a look for you onell...

You marked left one but I can see missing part on the right....

the right piece is there but is not a good picture..... the left one is missing

This is Zener diode 1N4764A-TAP or similar cos E2 mean GLASS-e2

thank you very much.... i replace that zenner diode .... but usb still dont work.... i gess something else is fried uffff..... any ideas?

Originally Posted by onell

thank you very much.... i replace that zenner diode .... but usb still dont work.... i gess something else is fried uffff..... any ideas?

My suggestion: On these days, you can find a TG01 for 100€ or less googlyng a bit.

You can also ask for a TG01 with broken screen for a bargain....

And if you only want the Motherboard, you could contact with someone needing the touch screen and share it!

good luck!

Problem is there is no FUSE in the usb charging line as is in majority handsets with usb charging and usb host.

My tg01 cannot charging using wall charger.I think its burn the charger ic and smell like burning rubber before.Anyone know which one is the charger circuit ic?.Is there charging ic is the right one on upper pics???