DO NOT MESSAGE ME BECAUSE WHAT'S IN HERE IS THE SAME I'M GOING TO REPLY YOU WITH.... :
Many of you guys are posting questions everyday about bricking your tab and most of you actually don't know what bricking is regarding to your device, in Phones\tablets there are three kinda of bricks which are listed below:
Warning :
Many People Are Soft\Hard bricking their Tab So Please Flash Safe And Read Carefully the Guides in Every Thread. Flash Safe
HARD BRICK
Unit does not power up, visibly charge, reach a boot-screen of any kind including a service or "download" screen. A device in this state requires service from the manufacturer or an individual equipped with the proper tools. There is no other way to recover a device in this state. (SpaceMoose1) you can refer to this guide to recover your HARDBRICK !!! http://forum.xda-developers.com/show....php?t=1312391
SOFT BRICK
Unit powers up, reaches a "download" or service screen, visibly charges but does not boot into an OS. Crashing, hanging etc. all apply here. It is easy to recover a device from this state so long as one has access to a firmware that was designed for the device and the ability to flash said firmware. (SpaceMoose1)
COMA BRICK
Device wont power on at all or respond to button input.
Device powered off, NO show of big battery icon, even when charger is plugged in. Don't panic, let it charge fully for 4 hours from a mains supply not usb.It will start again !!!. Battery big icon will appear around 30% battery charged, I know because that's what I saw. I didn't check when it's in 10% or 20%. The 1st time I check was already 30% up from no-boot or no response. (cx5)
INSTRUCTIONS FOR UNBRICKING
Here are some steps you have to follow to make sure that your tab will work or will not work at all
HARD BRICK
Check to see if the device is actually "Hard" bricked by leaving it plugged into charge for atleast 4 hours via a mains supply (NOT USB).
If above doesn't work you will need to send your Tab To Samsung To Fix it For you or visit this link.
Please Note: If you Return To Stock Froyo And Not Gingerbread Please If you Want To Flash Any Custom Rom .. Consider To Use The Bootloader Patch To Give you The Ability To Flash Any None Official Roms\kernels ( http://forum.xda-developers.com/showthread.php?t=888071 ) .
Note: Do Not Flash Any Rom Is Not made For your tab . read The Dev Guide Carefully Always ..
Note: Do Not PM Asking Me For Help . The Steps Are given , Are The Same I'll give If You PM Me ..
Hope the Information is helpful to everyone, remember not to try something unless you are %100 sure, other wise you may brick your device, its better to be safe than sorry!!
Thanks Goes For Our Mod ( conantroutman ) To Accept This Idea To Be Presented To You .
Thanks Goes For Natious For Helping Me With the Grammar
these are the two things you should put in ODIN .. Make Sure At The TOP in Left Side ( ID: COM ) The Yellow Color with The Numbers Are Showing , This Is Your Tab Means its plugged To Your PC\LAPTOP ..
4. unzip heimdall. go into the drivers folder, and run zadig.exe. at the top, select 'list all devices'. go to the dropdown menu, and select Samsung Composite USB (i'm pretty sure that's what it was called.) click start, and let it run.
5. open the heimdall front end.
6. put system in system (if you're flashing to ec02, then put factory in system)
put cache into cache
put param into param
put the zimage into both the kernel and recovery slots.
7. turn your tab off, and plug it into the computer using USB. hold down the power and the volume down buttons until you see the little droid dude with a shovel.
8. click the start button on heimdall.
9. wait for the flash to complete (don't unplug your device, obviously, during the flashing.) once your phone reboots, it's okay to unplug it.
10. now, boot into the stock recovery, and wipe data and cache. reboot, and update to ec02.
You should add a link to Connexion2005's profile for hard brick service. He can jtag just about anything to recover from a bricked state. Really great service and I can vouch for it second hand. For the tab it costs 50 bucks and this includes return shipping back to you. If he fails to unbrick the device (which I haven't actually heard of him doing) you don't pay for the service (only the shipping and diagnostic.)
Current Device:
- A White Samsung Galaxy Note.
--- Past Devices:
- White T-Mobile SGS2 (T989)
- Custom HTC MyTouch 4g
- TMOUS Galaxy Tab 7"
- Motorola Defy
- 2x TMOUS HTC HD2
- TMOUS G1
You should add a link to Connexion2005's profile for hard brick service. He can jtag just about anything to recover from a bricked state. Really great service and I can vouch for it second hand. For the tab it costs 50 bucks and this includes return shipping back to you. If he fails to unbrick the device (which I haven't actually heard of him doing) you don't pay for the service (only the shipping and diagnostic.)
i already tagged Spacemoose1 thread for the hard brick i can't post like this info because i'm not responsible about what is happen between the victim ( bricked tab) and the JTAG (man)
glad that my 900 was here and not in another thread
You take no responsibility anyways, it's just offering up advice. You aren't forcing anyone to send it anywhere... just offering a suggestion... Some of us have voided our warranty and this service would be better for us.
spacemoose actually posted about this guys service, it's legit.
Sent from my "better than an iPad" tab running Overcome Hermes.
Edit: oh I see, you linked that post, but the link doesn't work.
Current Device:
- A White Samsung Galaxy Note.
--- Past Devices:
- White T-Mobile SGS2 (T989)
- Custom HTC MyTouch 4g
- TMOUS Galaxy Tab 7"
- Motorola Defy
- 2x TMOUS HTC HD2
- TMOUS G1
New Mobile Operating System Jolla Sailfish‘s … more
XDA Developers was founded by developers, for developers. It is now a valuable resource for people who want to make the most of their mobile devices, from customizing the look and feel to adding new functionality. Are you a developer?