Results!
Ok, results:
Pictures all looked identical in both 2D and 3D with or without the plastic screen I attached.
UNLESS the flash was used. Now in my test, flash made the picture a little worse/bluer regardless, but only unacceptably so when the plastic screen was on.
So I removed the screen and cut out a hole for the LEDs!
The thumbnails are as follows:
Image 12=no plastic at all, 2D, w/ flash
Image 15=plastic (including over LEDs), 2D w/ Flash
Image 16=Plastic (including over LEDs), 2D NO flash
Image 19=Plastic (but NOT over LEDs), 2D without flash
Next post will show plastic (but not over LEDs) WITH Flash
|