[TOOL 07/11] Easy Fre3vo w/ Perma-Temp, Bloatware Disabler & Overclock (Win/Mac/Lin)

---

I want to start by thanking TeamWin for all of their hard work and the effort they have put in to Fre3vo. I also want to thank Daddyroot for his "Easy Copy/Paste." Euegene373 for his Perma-Temp root method, and Coolbho3000 for his Cverclock work! I also want to thank Mikeyxda for helping tidy things up a bit!

What is Easy Fre3vo?
Easy Fre3vo is a simple batch file that will give you temp-root, as well as give you a functioning Superuser ability. I have tested Titanium Backup. It worked flawlessly. I hope this helps and makes things easier for everyone!

Windows - How to:
1. Download and Install HTC Sync (Download Here)
2. Uninstall HTC Sync
3. Enable USB Debugging [Menu > Settings > Applications > Development] (Thanks Kitinas)
4. Download the attached ZIP
5. Extract the Folder
6. Open the Windows Directory
6. (a) Run Easy_Fre3vo_Start.bat
6. (b) If you lose root, Run_Easy_Fre3vo_Redo.bat

Mac - How to:
1. Enable USB Debugging [Menu > Settings > Applications > Development] (Thanks Kitinas)
2. Download the attached ZIP
3. Extract the Folder to your Desktop (This is required)
4. Open Terminal (Finder > Search "Terminal" > Open Terminal)
5. Type: cd "desktop/Easy Fre3vo/Macintosh"
6. Type: chmod +x "./Easy_Fre3vo_Start.command"
7. Type: chmod +x "./Easy_Fre3vo_Redo.command"
8. Open the Macintosh Directory
9. (a) Run Easy_Fre3vo_Start.command
9. (b) If you lose root, Run Easy_Fre3vo_Redo.command

Linux - How to: (Thanks to Bigmase521)
1. Enable USB Debugging [Menu > Settings > Applications > Development] (Thanks Kitinas)
2. Download the attached ZIP
3. Extract the Folder
4. Open Terminal and cd to Linux in the Extracted Folder.
5. Run this command in the terminal: chmod +x "Easy_Fre3vo_Start.sh"
6. Run this command in the terminal: chmod +x "Easy_Fre3vo_Redo.sh"
7. (a) Run this command in the terminal: "./Easy_Fre3vo_Start.sh"
7. (b) If you lose root, Run this command in the terminal "./Easy_Fre3vo_Redo.sh"

----------------------------

Bloatware Disabler:
This will remove the following Bloatware from your device:
mSpot Radio
DocMaster
TeleNav
MobiTV
Sprint
SpiderMan
Qik
Gameloft Widget
Report Agent
Nascar
HTC Log
eReader
AppSharing
Blockbuster

Windows - How to:
1. After aquiring root, if you used my method skip to step 5.
2. Enable USB Debugging [Menu > Settings > Applications > Development] (Thanks Kitinas)
3. Download the attached ZIP
4. Extract the Folder
5. Open the Windows Directory
6. Run Remove_Bloat.bat

Mac - How to:
1. After aquiring root, if you used my method skip to step 5.
2. Enable USB Debugging [Menu > Settings > Applications > Development] (Thanks Kitinas)
3. Download the attached ZIP
4. Extract the Folder to your Desktop (This is required)
5. Open Terminal (Finder > Search "Terminal" > Open Terminal)
6. Type: cd "desktop/Easy Fre3vo/Macintosh"
7. Type: chmod +x ./Remove_Bloat.command
8. Open the Macintosh Directory
9. Run Remove_Bloat.command

Linux - How to: (Thanks to Bigmase521)
1. After aquiring root, if you used my method skip to step 5.
2. Enable USB Debugging [Menu > Settings > Applications > Development] (Thanks Kitinas)
3. Download the attached ZIP
4. Extract the Folder
5. Open Terminal and cd to Linux in the Extracted Folder.
6. Run this command in the terminal: chmod +x Remove_Bloat.sh
6. Run this command in the terminal: ./Remove_Bloat.sh

----------------------------

Overclock
This will give you the ability, in SetCPU, to overclock your device to 1728000mhz.

Windows - How to:
1. After aquiring root, if you used my method skip to step 5.
2. Enable USB Debugging [Menu > Settings > Applications > Development] (Thanks Kitinas)
3. Download the attached ZIP
4. Extract the Folder
5. Open the Windows Directory
6. Decide weather you have applied the OTA then, Run_Overclock_OTA.bat or Overclock_Pre_OTA.apk

Mac - How to:
1. After aquiring root, if you used my method skip to step 5.
2. Enable USB Debugging [Menu > Settings > Applications > Development] (Thanks Kitinas)
3. Download the attached ZIP
4. Extract the Folder to your Desktop (This is required)
5. Open Terminal (Finder > Search "Terminal" > Open Terminal)
6. Type: cd "desktop/Easy Fre3vo/Macintosh"
7. Type: chmod +x "./Overclock_OTA.command"
8. Type: chmod +x "./Overclock_Pre_OTA.command"
9. Open the Macintosh Directory
10. Decide weather you have applied the OTA then, Run Overclock_OTA.command or Overclock_Pre_OTA.command

Linux - How to: (Thanks to Kushdeck)
1. After aquiring root, if you used my method skip to step 5.
2. Enable USB Debugging [Menu > Settings > Applications > Development] (Thanks Kitinas)
3. Download the attached ZIP
4. Extract the Folder
5. Open Terminal and cd to Linux in the Extracted Folder.
6. Run this command in the terminal: chmod +x "Overclock_Pre_OTA.sh"
7. Run this command in the terminal: chmod +x "Overclock_OTA.sh"
8. Decide weather you have applied the OTA then, Run this command in the terminal: "./Overclock_OTA.sh" or "./Overclock_Pre_OTA.sh"

----------------------------

[Note: If you notice any errors while a script is running, after, please check the device to see if it is rooted before posting that it simply did not work. Strange, but sometimes errors occur and everything turns out just fine!]

----------------------------

Change Log:
[07/11]
Repaired Macintosh Scripts
Changed Bloatware to Disable, it's permanent!
Repaired Linux Scripts

[07/10]
Updated Macintosh Scripts

[07/10]
Updated Bloatware Removal

[07/10]
Updated Macintosh Scripts

[07/10]
Updated Linux Scripts
Updated Overclock Scripts: 2 Scripts

[07/09]
Easy Overclock

[07/09]
Perma-Temp Root (Thanks Eugene)
Cleaned Folders
Bloatware Remover

[07/07]
Cleaned Script
New Start, and Redo Script
Support for Macintosh and Linux

[07/07]
Initial Release

----------------------------

If you have any issues, let me know!

If you appreciate my work, you can buy a coke[I'm not of age to have a beer...] or simply hit the Thanks button, I appreciate both.

I'll need to try this out when I get home. Great work!

Thanks! I originally made this for my Sensation, but I figured those with Evo 3D's could use it as well.

From the phone or cpu?

Thanks for the script. I'm assuming this is just a script that should be run the first time... But what about every time you reboot? Does the same script need to ran? Or can you make a quick script with what's needed after this initial script is ran for every reboot?

@dp13 Run it from the PC

@tigereyeslalo I just run it every time I reboot, doesn't hurt.

Wisefire 1000 thanks. It doesn't get easier then that.

Sent from my PG86100 using XDA Premium App

Originally Posted by Wisefire

@dp13 Run it from the PC

@tigereyeslalo I just run it every time I reboot, doesn't hurt.

Would you need to have SDK installed on ur PC or any PC u wish to run this.?

Sent from my PG86100 using XDA Premium App

Did not work for me. Are there special drivers I need? Is there any step you could have left out at all?? Maybe a small detail that you didnt include?

@CJPRICO Nope, I included the ADB files and everything.

@taygutta You're the first person it hasn't worked for, what version of windows are you running, and can you copy all of the text from the command prompt and post it here?