Welcome to XDA

Search to go directly to your device's forum

Register an account

Unlock full posting privileges

Ask a question

No registration required
Post Reply

[24 MAY] Dorimanx-ROM-HIGH-END 3.1.9 N277 ODEX NO-HOME-REFRESH+ZRAM+SKIN+TWEAKS+CRON

OP dorimanx

13th July 2011, 01:22 PM   |  #1  
dorimanx's Avatar
OP Recognized Developer
Flag Some Where North!
Thanks Meter: 66,701
 
9,589 posts
Join Date:Joined: Feb 2010
Donate to Me
More
Welcome to

This ROM is based on latest nightly of CM7 with my kernel and my tablet tweaks added to create the probably smoothest and fastest ROM your HD2 ever had.





It´s available for MAGLDR and CLK Boot loader.


Mirrors are ready for you to get my ROM and test it.

For all new users please read all info + change log before asking thanks.

Critical thing that you need to know.
This ROM works with SWAP / NO SWAP
FOR SWAP CREATION SEE PAGE 2
DON'T WANT SWAP!?, INSTALL REVERT TO LIGHT!


[ This ROM based on DORIMANX 1.62Ghz OC KERNEL AND LATEST NIGHTLY CM7 + My TWEAKS ]


LINKS TO KERNELS AND BIG THANKS TO:TYTUNG, HIEROS, MARC1706, AmeriCanAndroid
My kernel GIT

Kernel Made by ME in Mirrors! see below for thread link.
LINK to GPS LIBS by Tytung And BIG Thanks once more!
Link To GPS-LIBS


If you like this ROM and want to help me, rate this page with 5 STARS and give me a THANKS!






Quote:

  • GPS LIBS 2.1 NMEA with AGPS Support 5 to 20 second to GPS lock -> Link
  • Added GPS Status app to test GPS,BIG Thanks to Tytung
  • Camera that make picks with 100% Jpeg quality + Video on "HD" 800x480 6Mbit/s in MPEG4 format! smooth with no delays. 30MB/minute Found It HERE Thanks LeJay!
  • Added MIUI Camera v17 Fixed2, for all. (Thanks to MongooseHelix)
  • Latest nightly created for BRAVO phone. (Masked as HD2)
  • DATA Connection is above 2.5Mbits download! and Radio Auto switch 3G or H according to signal or Idle DATA to save Power!
  • TABLET TWEAKS, With big help from Lit
  • Cool Skin with ICS 4.0 transition and lot's of nice icons, created by UOT kitchen
  • Battery % advance by 1% not by 5% also shows % on charger connected
  • Added CRONTAB ability as ADD-ON this will make ROM free of dead file cache and RAM / SWAP cache on different time, Read Page 3 for info.
  • Lots of scripts that do kernel tweaking, partition remounting, CPU down-volting, cache rearrange, send marked downloads to RAM-DRIVE and more
  • ROM Support Apps2SD! NO NEED To install external scripts!!! all apps will be installed to EXT partition by default, if no EXT exist then to NAND drive!
  • ROM now supports DATA To EXT, this mod will move all app data to EXT and speed access to them by 3 times!
  • With DATA to EXT quadrant score is 2800+ on light rom, 2600+ on heavy loaded rom.
  • ROM has media / video decoder/ encoder drivers that allow loud sound from speaker and smooth video record and play back
  • ROM has 2 modes, with swap and without it. (HIGH END / LIGHT) (read more below)
  • Added HACKED DPI check Market , now you can download and install any app, by using any density resolution!
  • Default CM7 FM Radio
  • Ads block in HOSTS file, more than 23500 ads blocked
  • Full root with new superuser 3.X already updated to latest SU
  • Preinstalled Busybox 1.19.4 ,configured and ready
  • CLK Ril_Wrapper 4 installed to fix the connection problem
  • Added GTALK 1.3 with voice / video support
  • Added latest Google Apps limited pack, only needed apps
  • DATA / WIFI / GPS / AUTO DIM LIGHTS and blink lights Fixed LIB!
  • Working WIFI Tethering app > Barnacle Wifi Tether (Found by Rudyfastcat )
  • MMS blurry pics fix for T-Mobile US users by Tytung! > HERE
  • Dorimanx-Kernel made by me (kernel thread)
  • ZRAM support (compcache)
  • Aroma Installer Menu, that will guide you on installation!


If you are here and want this ROM then you have already CLK / MAG partition installed and ready.
If not please check how too in any different ROM long guide for starters,
This is the most advanced ROM for now.

Decide which version you want :
  1. With Swap
    High-End-Version
    -you will need an auto task-killer since the Internal Auto killer is DISABLED!!!
    -Recommended are System Tuner Pro + Advanced Task Killer
    -to make it High-End create a SD-ext as usual + create a swap partition of 256MB and flash my ROM
  1. Without Swap
    Lite-Version
    -Home-Refreshes will be present (but not always!)
    -to make your ROM a lite version choose it in install menu!


Quote:

  • Flash the CWM partition layout from Mirrors,
  • Do a backup of SD card,format it and create a SDext and swap(256Mb)
  • Flash “Dorimanx-Rom-X.X.X-Nightly-XXX-All-in-One !!
  • Everything will be done by my scripts and ROM
  • Boot and restore all your stuff and customize it to your personal wishes.
  • Make a backup via recovery after all to have a backup if you do something bad later.

Enjoy!!

---> This ROM is in constant grow, and Bug find and repair, so if you don't like to flash updates often! then use an other ROM <---

Things to know about ROM

On each boot, you will see Ember Lights blink 3 times and switch to Green!
This is how you know that ROM is loading OK, and there is no boot loop,
When Rom will be almost fully loaded the Green Light will blink 3 times and switch off.
My advice not to unlock phone till you see the GREEN light blink then wait 5 seconds and unlock, this way Home app will load fast and no delays.
When Light blink 3 times green it's tell you that CPU is released and ready for more jobs!

If you see the Ember light again and again and no animation then ROM in Boot loop. (95% will not happen ) I test my ROM many times before upload.


How to update (ROM already installed but not latest version):
  • Clear cache.
  • Clear Dalvik cache (not necessary if you don´t have problems dont do it!)
  • Download and flash new release like usual
  • REBOOT.
  • When booted, wait till CPU will be free, 3 green blinks!
  • REBOOT!!!
  • No permission fix needed, but if some FC on some apps, do it! and clear there data! should fix all problems.
  • Be Happy

This is all the GUIDE you need.

Have fun!


Here is new mirror provided by Willflint




Here is my mirror provided by looki75



Here is my mirror provided by Netson99




Here is my mirror provided by Guinhill
MIRROR 4



PERSONAL REQUEST!
If MAIN Mirror is SLOW please use the BACKUPS!

Also if you find this ROM and my help worth 5 STARS then rate this page with 5 STARS!



Here i will post names of people that helped me with development testing and donated to get me going

All people that DONATED or helping me with this project are considered true members of my team!

Willflint, Looki75, Netson99 and Guinhill = Huge donation!!! The Mirror sites! all credits and respect to them!
Krook6023=Main Page modification!!! He is the creator of LOGOS and rearrangements! HUGE DONATION!
Tytung,Marc1706, AmeriCanAndroid,Fhasovic=For Help with KERNEL! and GPS Libs!
Louie317=HUGE Donation! 100$,Honored member!
Jonas2295=HUGE Donation! one more HD2 that he partially donated to me for help in development! 2 is better then one + Main Page Text modding!
Nixda99 & Amarullz =HUGE Donation to this ROM! The AROMA Installer boot menu. (Developed by Amarullz and tuned for ROM by Nixda99 and Me)
Tiger22=Donation X5,Support,active help,Veteran and Honored member!
Denny02ng=Donation X5,Support,respected Veteran and honored member!
Belzebuth=Donation X4,Support,active help,respected Veteran and Honored member!
Bologna=Donation X4,Support,active help,respected Veteran and Honored member!
Hinnne=Donation X3,CLK Kernel Testing,support,active help,respected veteran member!
Howell=Promotion of our ROM on French Android HD2 Portal with high success!,Honored Member!
Ccbm3=HUGE Support!,For creating the ROM Review and upload to YouTube! Great JOB!
Pirlano=Honored Member!, for helping me find the way to move DATA to EXT! and make our ROM super Fast!
Rudyfastcat=active help,feedback,support,respected veteran member!
Feanor91= active feedback and support,respected veteran member!
Visentinel=active help,feedback,support,respected veteran member!
Lit=Big Help with Tablet Tweaks,support,active help,And Promotion of our ROM in Russian Forum!
Themadproducer= Donations + active feedback and support,respected veteran member!
Gerardroid =Donation X2 + active help,feedback,support,respected veteran member!
Allcomb =BIG $$ Donation + active help,feedback,support,
Miguelidanez=Donation X2,Support,respected veteran member!
MystaMagoo =Donation X2,Support,active help,respected veteran member!
Barjel=Donation X2,active feedback,support,
Dmunseyautotech=Donation X2,Support,
Tmotard X2=Donation,Support,great support.
Tageeboy =Donation + active help,feedback,support,
kantjer=Donation,support,
Gho57=Donation,support,
SkooterD=Donation,Support,active help,
Guinhill=Donation,Support,
Justaguyh=Donation,Support,
Blek42=Donation,Support,
GigahurtzUK=Donation,Support,
Rebel01st=Donation,Support,
Joescian=Donation,Support,active help,
Gubi99=Donation,Support,
Dirtytwo=Donation,Support,
A3r0n1=Donation,Support,
AzureD=Donation,Support,
Sajin1=Donation,Support,
Michie=Donation,Support,
Htc-android=Donation,Support,
Traukoman=Donation,Support,
Marzinho=Donation,Support,
Faka tm*Sap*=Donation,Support,
M4a1a2=Donation,Support,
WillieStylez=Donation,Support,
Vicente
=Donation,Support,
Marc New***
=Donation,Support,
Ic3fox
=Donation,Support,
Patrick O'k***
=Donation,Support,
D1wepn=Donation,Support,
Screemi=Donation,Support,
KRAZzysoldier=Donation,Support,
Mappazza
=Donation,Support,
Pedmond=active feedback and support,
Ccristal=active help,feedback,support

THANKS TO YOU ALL!

You want to be in my list?
-Then help people to use my ROM.
-Give feedback on bugs or suggestions
-Provide Mirror
-DONATE!
And Be respected!



Hey I got something nice for you in time that you download.
Watch my best friend rock band play!
And my ROM out of BOX review! made by
Ccbm3






If you Donated and I didn't added you to the list,
First I am sorry for that,
Please PM me, I will add ASAP


24/5/12 Time 14:30
New ROM 3.1.9 Nightly 277 from last offline source! + Kernel 7.1A
Change Log HERE


02/5/12 Time 02:47AM

New ROM 3.1.7 Nightly 276 from last offline source! + Kernel 6.7
Change Log HERE

14/4/12 Time 23:58

New ROM 3.1.6 Nightly 275 from last offline source! + Kernel 6.5B (ROM DELETED)
Change Log HERE
Fixed ROM 3.1.6.1 + kernel 6.5C (ROM DELETED)
Change Log HERE
Fixed ROM 3.1.6.2 + kernel 6.5D
Change Log HERE

30/3/12 Time 22:24

New ROM 3.1.5.1 Nightly 274 from last offline source! + Kernel 6.3

*fixed root and updated to last 6.3 kernel update.

24/3/12 Time 4:10AM

New ROM 3.1.4 Nightly 273 from last offline source! + Kernel 6.1

Change Log HERE
ROM 3.1.3 was not added here, i was too busy.

05/3/12 Time 1:35

New ROM 3.1.2 Nightly 271 from last source + Kernel 5.4

Change Log HERE

21/2/12 Time 1:00

New ROM 3.1.1 Nightly 270 from source + Kernel 5.3

Change Log HERE

21/2/12 Time 1:00

New ROM 3.1.0 Nightly 269 from source + Kernel 4.7
Change Log HERE

Change log trimmed dates!
New ROM 3.0.9 Nightly 268 from source + Kernel 4.7
Change Log
HERE
New ROM 3.0.8 Nightly 267 from source + Kernel 4.0
Change Log
HERE
New ROM 3.0.6 Nightly 265 from source + Kernel 3.6
Change Log
HERE
New ROM 3.0.5 Nightly 264 from source + Kernel 3.3
Change Log
HERE
New ROM 3.0.3 + Kernel 3.2

Change Log
HERE
New ROM 3.0.1 + Kernel 3.0
Change log
HERE
New ROM 3.0.0 + Kernel 2.9
Change Log
HERE
New ROM 2.9.9 + Kernel 2.7

Change Log
HERE
New ROM 2.9.8 + Kernel 2.5

Change Log HERE
New ROM 2.9.7 + kernel 2.3

Change Log HERE
New ROM all in one 2.9.5

Change Log HERE
New ROM 2.9.4 Nightly 245

Change Log
HERE
New ROM 2.9.3 Nightly 242
Change Log HERE
New ROM 2.9.0 Nightly 231!
Change Log HERE
New ROM 2.8.9 based on Stable CM7 7.1.0!

Change Log HERE
New ROM 2.8.8 Nightly 220 Base 2.3.7!
Change Log
HERE
New ROM 2.8.6
Change log HERE
NEW ROM 2.8.5 nightly 210
Change log HERE
NEW ROM 2.8.4 nightly 209
Change log HERE and HERE
NEW ROM 2.8.3 nightly 207
Change log HERE
New ROM 2.8.2 nightly 203!
Change log HERE


Fix home/call buttons if not working after install!
1. Install AnyCut from Android Market
2. Go to the home screen
3. Long press on the wallpaper
4. Tap "Shortcut"
5. Tap "Any Cut"
6. Tap "Activity"
7. Choose "Setup Wizard" from the list of activities
8. Tap "OK"
9. There should now be a Setup Wizard icon on your home screen. Follow the wizard through to completion and the dial / home / hangup hardware keys should now be behaving normally again.


Boot Boost Addon (All kernels)

***On Boot, Max speed to 1.47Ghz or 1157Ghz this is more stable speed, and will prevent stuck on boot when phone overheated above 42C
This UPDATE IS NOT MUST!!! ONLY IF YOU WANT!!!

***Included new fixed SQL LITE from Samsung thread that fix lag in I/O (Big Thanks to the developers that provided it.)

UPDATE ABOUT GPS!
3 GPS.conf files with regions + AGPS auto download tweaks and new tweaks for 2.0 only + More Tweaks found by me.

gps.conf_Auto_AGPS_update_every_24hr_(asia).zip
gps.conf_Auto_AGPS_update_every_24hr_(europe).zip
gps.conf_Auto_AGPS_update_every_24hr_(north-america).zip

Or you can change GPS.conf manually by looking here for our NTP server name for country go HERE
Find your region and change the Asia to your in gps.conf
save and reboot or do it before flash!

About SWAP!
ROM will activate 3 kind of swap
It's will turn ON (only if you have already created swap file on partition, or set partition for swap (the hard way) )

SD-EXT SWAP
SD-SWAP
EXT dedicated SWAP partition
***If you have SWAP already, or EXT or SD-SWAP/EXT-SWAP, no need to run the swap activation scripts.
***I have created 2 scripts for disabling SD swap before use of USB storage.
I have put them in your /sdcard/gscript
so you only need the app (gscript light or full)
then load this scripts, when you need usb storage run swapoff script. when done run swapon.
or you can install dual mount app. i can’t live without it so try it.

Camera!

Camera taking better pick now!
And video recording is with m4v decoder and mp4 file output, video is super! with no lag!
On "HD" camera is on 800x480 6Mbits frameRate="24" Video codec="m4v" fileFormat="mp4"
Sound aac bitRate="96000" sampleRate="16000" 30MB in one minute!!!
On "HIGH" camera is on 720x480 3Mbits frameRate="24" Video codec="m4v" fileFormat="mp4"
Sound aac bitRate="96000" sampleRate="16000" 23MB in one minute!!!

To switch from High to HD just choose HD in camera,
if you switch and no difference in screen size then choose LOW and back to HIGH or HD its will change...

Libaudio Drivers
I have uploaded 5 different audio drivers! (Credit to developers)
You can test them one by one, and if you get phone call bug then use the next one, till you be happy with one of them.

Older Changelog

Links for Nightly Updates:

CHANGE LOG

DOWNLOADS FOR BRAVO





This ROM is special, its tweaked to MAX! its super fast and has lots of RAM+SWAP

In order to use this ROM as HIGH END you must know that default AndroidAutoKiller is disabled!

This why it's so stable and home app never refresh,

But you must control your free RAM with app called " System Tuner PRO (was know as process monitor pro) " look for it and you will find it.

Also i recommend to use Advanced task killer pro with system tuner pro!

This app will control your RAM and not let to ROM to overload it self and reboot.
I have excluded all my apps and services that i want to run in RAM all the time and the rest are killed when i turn my screen off! or when no more RAM exist.
This setting is inside this application.

It's best that RAM will always be more then 40MB!

The Light ROM (update) set the auto killer back on line, this will limit you to open only 40 apps + services + system stuff, and after app 41 the home screen will refresh and all big apps in RAM will be closed. this is bug in CM7 not related to me.
I just found a way to disable it. (HIGH END)

I have many tweaks working in this Rom,

CRON script that TASK activation by time set.

it's running script every 10 minutes
Script sit in /sdcard/phonePrioritizer/script.txt

It's contain function called renice.

It's set CPU power priority to apps and services that exist in RAM.
I have tweaked the system services and stock apps to best setting for priority.
you can add custom apps

you can use renice range from -15 (big priority to service / app ) to 15 (very low priority to app / service)

The -20 to -15 reserved for system. do not use it or instability can be felt.

To add custom app to priority script install autokiller from market open your app push home, go to autokiller app and to services ,
find your open app, click long on it and choose more info,

you will see that package name, this is what you need, write it down and go and edit the script.txt according my example at the bottom of the script.

We Are Number One! In NAND ROM NO SENSE!



Keep the feedback flowing, I need to know how it's working for you.!

Lets make best ROM for US!


DON'T FORGET TO PUSH THE THANKS! BUTTON


YOU CAN ALSO DONATE TO KEEP ME GOING!




LOOK FOR BUTTON "Donate To Me" under my nickname!

Thanks for using my ROM!
I am here for you so write comments!




Attached Thumbnails
Click image for larger version

Name:	20110730221011.jpeg
Views:	32579
Size:	162.2 KB
ID:	676851   Click image for larger version

Name:	20110804104628.jpg
Views:	57719
Size:	59.8 KB
ID:	676852   Click image for larger version

Name:	20110804104640.jpg
Views:	24722
Size:	38.3 KB
ID:	676853   Click image for larger version

Name:	20110804104739.jpeg
Views:	23478
Size:	167.1 KB
ID:	676854   Click image for larger version

Name:	20110804105548.jpeg
Views:	23351
Size:	104.5 KB
ID:	676855   Click image for larger version

Name:	20110804104843.jpg
Views:	23621
Size:	64.6 KB
ID:	676856   Click image for larger version

Name:	20110804105629.jpeg
Views:	39613
Size:	149.9 KB
ID:	676857   Click image for larger version

Name:	20110616204523.jpeg
Views:	28392
Size:	181.8 KB
ID:	676859  
Last edited by dorimanx; 24th May 2012 at 01:30 PM.
The Following 437 Users Say Thank You to dorimanx For This Useful Post: [ View ]
13th July 2011, 01:22 PM   |  #2  
dorimanx's Avatar
OP Recognized Developer
Flag Some Where North!
Thanks Meter: 66,701
 
9,589 posts
Join Date:Joined: Feb 2010
Donate to Me
More
SWAP THE HARD WAY!

What is swap?
Swap is extension or RAM on sdcard, for ability to load more apps in RAM and get fast multy tasking (apps stay in ram)


Many people think that this is not needed any more. well i must disagree it's way better with swap when you don't have any more RAM to spare.

When no RAM Android start to kill apps that sit in RAM and by doing this kills my apps that i use all the time,
So phone loads them again and use CPU power in process and killing other apps!
so it's a circle a loop, with swap no problem!
I have 37 apps in memory all the time.

So here is the guide to activate SWAP on your device The hard way!

Again read about it and only if you think you need it and you are heavy user like me!

Then follow closely to instructions!


1) This procedure will erase your SDCARD!!!
So before you begin backup all your stuff from SDCARD and the extended Linux partition to your computer drive!

You can use Titanium backup PRO to backup all, and then move all to your disk.
And after you finish, restore all back.

2)when you ready to format your SDCARD, Download Recovery_150M_system_5M_cache[v3.1.0.1].zip from my ROM mirror!
unzip to comp and install it, (how to you must know by now)

3)when all done, enter to new recovery console, go to advanced and use the partition sdcard
Choose your preferred size of extended partition, then it's will ask you about the size of the SWAP partition! choose 256MB (the MAX) finish and turn your device OFF.

4)remove your SDCARD and using card reader format the FAT32 partition with 32Block NOT the 4096 by default. (this will increase reading and writing performance)

5)copy your stuff back as was to SD.

6)If your ROM working then proceed to 7 if not install your ROM and after restart install my tweaks.

7)now is the fun part! you have swap activated and working! no need to do any thing more!


Now you should see that you have SWAP of 256MB and 0 Used
Go to terminal and run
free

It's will start to grow and shrink automatically depend on your RAM use and be activated on boot!.







SD SWAP THE EASY WAY!


In Easy way Swap you don't need to reformat or even reboot your phone to create swap!

If you installed my ROM and you don't have swap but you want to stay on HIGH END ROM,
Then you can do this to enable SD swap


Download script sdswap200.sh or dataswap250.sh from my mirror.

Run in in GSCRIPT App or copy it to SDCARD root,

Open Terminal:

type this:
Code:
su -

sh /sdcard/sdswap200.sh

OR

sh /sdcard/dataswap250.sh
wait for it to finish!

done you have 200mb of swap! with sdwapscript on sdcard OR 250MB swap on EXT (DATA) partiton

You must have 200mb FREE on sdcard before you run this script! OR 250 on EXT DATA partition.


Every time you reboot swap will be activated! NO need to run script any more.


Last edited by dorimanx; 30th July 2011 at 02:40 AM.
The Following 114 Users Say Thank You to dorimanx For This Useful Post: [ View ]
13th July 2011, 01:23 PM   |  #3  
dorimanx's Avatar
OP Recognized Developer
Flag Some Where North!
Thanks Meter: 66,701
 
9,589 posts
Join Date:Joined: Feb 2010
Donate to Me
More
Real Working Auto Brightness module

Here is the Auto Brightness module that you can configure via Settings ( lights.qsd8k.so )

But You will lose the Blinking Notification Light! it's just will be ON (Red Light) if you have notification, or OFF if you don't.

My settings that work just great for me


After installation go to settings > Display settings > Brightness


And set the Automatic Brightness ON


Then go to settings > CyanogenMod settings > Display > Automatic backlight.


*At Light sensor filter check-box ENABLED

*At windows length use 10sec
*Reset threshold use 400LUX
*Sample interval use 2sec

At Light Levels check-box Use Custom

*Screen dim level use 10
*Edit other levels...
Firs of all : Set number of levels to 7 and push the save & apply, you should see now 7 levels

It's should look like that:
Code:
 

Upper = (this is changing automatically when you set all the rest) 

Lower          Upper    Screen    Buttons 

0              14        25          255 

15            149       40          255 

150          224       50          255 

225          499       70           0 

500          999        80          0 

1000        2999      100         0 

3000       INFINITY  250        0    (this is the max level)
Save & Apply go back <--

*Check-Box the Allow light decrease


*At decrease hysteresis use 50%


Have fun with the setting if you like.


Click image for larger version

Name:	screenshot-1318546151301.jpg
Views:	17488
Size:	29.4 KB
ID:	749143
CROND TASKER! MODULE!


I have finally cooked the CROND task service configuration, Thanks to LIT!

I have uploaded file CRON-TASKS.zip to mirror.

Cron will start 2 minutes after Full BOOT!!!

SO HOW TO CONFIGURE IT BEFORE INSTALL!!!!

Open the zip!

in folder /system/etc/int.d

open file 08wcron with notepad ++ of EditPlus (not with notepad)

find this:

TZ=IDT-3

This is the TIME ZONE! it's important!

PUSH THIS LINK!

Find you country in that LINK!

Example!

I see for Israel

Friday, August 12, 2011 at 01:44:22 IDT

Current time zone offset:UTC/GMT +3 hours

So i need to SET! opposite! -3 (WHY? have no idea, but this is the only way)

TZ=IDT-3

Then save and install

WHAT IS IT DO?

First it's will remove the Phone prioritizer app, and save you 60MB ram,

CRON will do this!:

Run the prioritizer script every 10 minutes to speed up the phone!
1-59/10 * * * * sh /mnt/sdcard/phonePrioritizer/script.txt;date > /data/cron-renice;echo "runing script.txt every 10MIN" >> /data/cron-renice

Run Clear file Cache every 4AM!
0 4 * * * sh /mnt/sdcard/phonePrioritizer/reboot.txt;date > /data/cron-clear-file-cache;echo "runing reboot.txt to clear cache without reboot every 4:00AM" >> /data/cron-clear-file-cache

Run Clear RAM Cache every 6 hours day/night to speed up the phone!
0 0-23/6 * * * sync;sysctl -w vm.drop_caches=3;sleep 3;sysctl -w vm.drop_caches=0;date > /data/cron-clear-ram-cache;echo "runing clear ram cache every 6 Hours" >> /data/cron-clear-ram-cache

Clear SWAP and re-enable it back! Release all the LAG cache (works for HIGH END, no change for LIGHT ROM)
20 4 * * * swapoff -a;sleep 5;swapon -a;date > /data/cron-clear-swap;echo "runing clear swap every 4:20AM" >> /data/cron-clear-swap

Script that hold the tsks above is in /data/data/cron/root (in install ZIP)
when in phone then in /data/cron/root

Examples:

* * * * * sh /sdcard/SOMESCRIPT.sh (this will run the script every minute!)

0 5 * * * sh /sdcard/SOMESCRIPT.sh (this will run the script every 5:00AM)

30 5 * * * sh /sdcard/SOMESCRIPT.sh (this will run the script every 5:30AM)

1-59/30 * * * * sh /sdcard/SOMESCRIPT.sh (this will run the script every 30 minutes!)


There are too many combinations, search google for crontab settings


Also i have packed small script name cron-check.sh it's will go to /sdcard/gscript

so load it with gscript and then you can check the status of CRON!

this is what you will see!

/data/cron-clear-file-cache:Thu Aug 11 04:00:01 PDT 2011
/data/cron-clear-file-cache:runing reboot.txt to clear cache without reboot every 4:00AM

/data/cron-clear-ram-cache:Thu Aug 11 18:06:56 PDT 2011
/data/cron-clear-ram-cache:runing clear ram cache every 6 Hours

/data/cron-clear-swap:Thu Aug 11 04:20:06 PDT 2011
/data/cron-clear-swap:runing clear swap every 4:20AM

/data/cron-renice:Thu Aug 11 21:21:01 PDT 2011
/data/cron-renice:runing script.txt every 10MIN

if you see this with your time, then all ok!

But you need to wait till it's will be executed!

so first you will see the:

/data/cron-renice:Thu Aug 11 21:21:01 PDT 2011
/data/cron-renice:runing script.txt every 10MIN

after 10 minutes,

all the rest after first execution!

To see if cron RUNNING!

crond is installed with the busybox!

in terminal do:

ps | grep crond

you get something like this (after you install configured ZIP)

# ps | grep crond
root 4338 1 2188 420 c00bf130 00008a7c S crond




So have fun with it
Last edited by dorimanx; 14th October 2011 at 12:53 AM.
The Following 85 Users Say Thank You to dorimanx For This Useful Post: [ View ]
13th July 2011, 01:23 PM   |  #4  
dorimanx's Avatar
OP Recognized Developer
Flag Some Where North!
Thanks Meter: 66,701
 
9,589 posts
Join Date:Joined: Feb 2010
Donate to Me
More
Lightbulb All my work will be posted here free for all, i will updat on new tweaks.

********HERE I WILL POST MY WORK********


MY /SYSTEM/ETC/INIT.D SCRIPTS:

01MountAll
Code:
#!/system/bin/bash
# Created by Dorimanx
echo 1 > /sys/devices/platform/leds-microp/leds/amber/brightness

L="log -p i -t cm"

$L "Welcome to Android `getprop ro.build.version.release` / `getprop ro.modversion`";
$L "                                                  ";
$L "  DORIMANX SUPER FAST AND TWEAKED TO THE MAX ROM ";
$L "                                                  ";
$L " ";

stop

#creating debug log for admin.
echo "creating debug log for admin at /data/mountall-script-debug.sh"
echo "new boot" > /data/mountall-script-debug.sh
echo "Pre BOOT Start" >> /data/mountall-script-debug.sh
date >> /data/mountall-script-debug.sh

##############################################################################################################################################
Enable-EXT-check-and-repair-and-speedUP () {
echo "Repairing ext file system and speeding access"
echo "Repairing ext file system and speeding access" >> /data/mountall-script-debug.sh
if  [ -e /dev/block/mmcblk0p2 ]; then
echo "Ext file system found..."
echo "Setting journal_data_writeback on sd-ext partition to speed the access"
cat /proc/mounts  > /etc/mtab
echo "Converting EXT3 to EXT4 if not done yet by user if done then ignore"
echo "Converting EXT3 to EXT4 if not done yet by user if done then ignore" >> /data/mountall-script-debug.sh
tune2fs -O extents,uninit_bg,dir_index /dev/block/mmcblk0p2
echo "Convert is DONE, you have EXT4 NOW"
echo "Convert is DONE, you have EXT4 NOW" >> /data/mountall-script-debug.sh
tune2fs -o journal_data_writeback /dev/block/mmcblk0p2
tune2fs -m2 /dev/block/mmcblk0p2
echo "e2fsck running"
e2fsck -vyf /dev/block/mmcblk0p2
tune2fs -l /dev/block/mmcblk0p2
tune2fs -r 2048 /dev/block/mmcblk0p2
estatus=$?
if [ $estatus -gt 0 ]
then
echo "One or more errors were found in your ext4 partition"
echo "One or more errors were found in your ext4 partition" >> /data/mountall-script-debug.sh
if [ $estatus -eq 1 ]
then
echo "File system errors were corrected successfully"
echo "File system errors were corrected successfully" >> /data/mountall-script-debug.sh
elif [ $estatus -eq 2 ]
then
echo "Serious file system errors were found and corrected successfully"
echo "Serious file system errors were found and corrected successfully" >> /data/mountall-script-debug.sh
elif [ $estatus -eq 4 ]
then
echo "Serious file system errors were found and COULD NOT BE FULLY CORRECTED"
echo "Serious file system errors were found and COULD NOT BE FULLY CORRECTED" >> /data/mountall-script-debug.sh
else
echo "e2fsck has encountered technical errors and cannot continue. Script will ABORT"
echo "e2fsck has encountered technical errors and cannot continue. Script will ABORT" >> /data/mountall-script-debug.sh
fi
#statexit=1
else
#statexit=0
echo "Your ext file system was checked and was clean..No repair was necessary."
echo "Your ext file system was checked and was clean..No repair was necessary." >> /data/mountall-script-debug.sh
fi
else
echo "No Ext file system found...Skipping"
echo "No Ext file system found...Skipping" >> /data/mountall-script-debug.sh
fi
}
############################################
#Trigger, without # =ON with #OFF default=ON

Enable-EXT-check-and-repair-and-speedUP

##############################################################################################################################################
Check-FAT-Partition-and-repair () {
echo "Repairing SDCARD FAT Partition"
echo "Repairing SDCARD FAT Partition" >> /data/mountall-script-debug.sh
if  [ -e /dev/block/mmcblk0p1 ]
then
echo "Sdcard found.."
echo "Sdcard found.." >> /data/mountall-script-debug.sh
mount -t vfat /dev/block/vold/179:1 /mnt/sdcard
echo "DosFsck running..."
fsck_msdos -p -f /dev/block/mmcblk0p1
dosstatus=$?
if [ $dosstatus -gt 0 ]
then
echo "One or more errors were found in your Fat32 partition"
echo "One or more errors were found in your Fat32 partition" >> /data/mountall-script-debug.sh
if [ $dosstatus -eq 1 ]
then
echo "File system errors were corrected successfully"
echo "File system errors were corrected successfully" >> /data/mountall-script-debug.sh
elif [ $dosstatus -eq 2 ]
then
echo "Serious file system errors were found and corrected successfully"
echo "Serious file system errors were found and corrected successfully" >> /data/mountall-script-debug.sh
else
echo "dosfsck has encountered technical errors and cannot continue. Script will ABORT"
echo "dosfsck has encountered technical errors and cannot continue. Script will ABORT" >> /data/mountall-script-debug.sh
fi
else
echo "Your Fat32 file system was checked and was clean..No repair was necessary."
echo "Your Fat32 file system was checked and was clean..No repair was necessary." >> /data/mountall-script-debug.sh
fi
else
echo "Your Fat32 file system could not be read Script will abort"
echo "Your Fat32 file system could not be read Script will abort" >> /data/mountall-script-debug.sh
fi
umount -l /mnt/sdcard
}
############################################
#Trigger, without # =ON with #OFF default=ON

#Check-FAT-Partition-and-repair

##############################################################################################################################################
Find-and-Mount-SD-EXT-and-SpeedUP () {

BB="logwrapper busybox";

echo "find SD Card"
for MMC_NUM in `seq 0 9`;
do
MMC_TYPE=`cat /sys/block/mmcblk$MMC_NUM/device/type`
if [ "$MMC_TYPE" = "SD" ];
then
# 2nd partition of sdcard should be the sd-ext if exist
SD_EXT_PART=/dev/block/mmcblk${MMC_NUM}p2
break
fi
done

if [ -b "$SD_EXT_PART" ];
then
log -p i -t mountsd "Mounting EXT filesystem..";
echo "Mounting EXT filesystem.." >> /data/mountall-script-debug.sh
echo "mount and set perms"
$BB mount -o rw,nobh,barrier=0,noatime,nodiratime,data=writeback,nosuid,nodev,nobh,nouser_xattr,noauto_da_alloc,commit=60,inode_readahead_blks=1,delalloc $SD_EXT_PART /sd-ext;
######################
#backup config for tests.
#$BB mount -o rw,nobh,barrier=0,noatime,nodiratime,data=writeback,nosuid,nodev,nobh,nouser_xattr,noauto_da_alloc,commit=240,journal_async_commit,inode_readahead_blks=1,delalloc $SD_EXT_PART /sd-ext;
######################
fi
if [ "$?" = 0 ];
then
$BB chown 1000:1000 /sd-ext;
$BB chmod 777 /sd-ext;
log -p i -t mountsd "sd-ext successfully mounted";
echo "sd-ext successfully mounted" >> /data/mountall-script-debug.sh
else
log -p e -t mountsd "Unable to mount filesystem for /sd-ext";
echo "Unable to mount filesystem for /sd-ext" >> /data/mountall-script-debug.sh
fi
}
############################################
#Trigger, without # =ON with #OFF default=ON

Find-and-Mount-SD-EXT-and-SpeedUP

##############################################################################################################################################
Enable-Dalvik2SD () {

if [ ! -e /data/dalvik-on-data-now ]; then
echo "Enable Dalvik2SD"
echo "Enable Dalvik2SD" >> /data/mountall-script-debug.sh
if [ -e /dev/block/mmcblk0p2 ];
then
echo "move dalvik cache from internal memory to sdcard"
echo "move dalvik cache from internal memory to sdcard" >> /data/mountall-script-debug.sh
if [ ! -d /sd-ext/dalvik-cache ];
then
mkdir /sd-ext/dalvik-cache;
busybox chown 1000:1000 /sd-ext/dalvik-cache;
busybox chmod 777 /sd-ext/dalvik-cache;
fi
echo "move dalvik to sd-ext"
echo "move dalvik to sd-ext" >> /data/mountall-script-debug.sh
busybox rm -rf /data/dalvik-cache;
echo "Create BIND to SD-EXT"
echo "Create BIND to SD-EXT" >> /data/mountall-script-debug.sh
mkdir /data/dalvik-cache
mount -o bind /sd-ext/dalvik-cache /data/dalvik-cache

echo "clean up old whiteouts in SD-EXT"
echo "clean up old whiteouts in SD-EXT" >> /data/mountall-script-debug.sh
for i in local misc property system tombstones;
do
if [ -h /sd-ext/$i ];
then rm -rf /sd-ext/$i;
fi

busybox rm -f /sd-ext/app/*.odex
setprop cm.dc2sd.active 1;

echo "+++ dalvik2sd enabled"
echo "+++ dalvik2sd enabled" >> /data/mountall-script-debug.sh
done;
else
echo "NO EXT Partition Detected"
echo "NO EXT Partition Detected" >> /data/mountall-script-debug.sh
fi

DC2SD_ACTIVE=`getprop cm.dc2sd.active`

if [ "$DC2SD_ACTIVE" != 1 ];
then
# replace symlinks with directories so we can boot without sd
rm -rf /data/dalvik-cache;
mkdir /data/dalvik-cache;
busybox chown 1000:1000 /data/dalvik-cache;
busybox chmod 777 /data/dalvik-cache;
fi;
else
echo "YOU HAVE DALVIK MOVED TO NAND DATA"
echo "YOU HAVE DALVIK MOVED TO NAND DATA" >> /data/mountall-script-debug.sh
fi
}
############################################
#Trigger, without # =ON with #OFF default=ON

Enable-Dalvik2SD

##############################################################################################################################################

Apps2SD-Script () {

# Apps2SD using symlinks and bind mounts
# Original Apps2SD script by shade@chemlab.org (cyanogen)
# Adapted for Oxygen ROM by AdamG
# Fixed for slow detection of SD cards by _thalamus and output a bit more debugging info so we can see where problems are arising.

# execute any postinstall script then kill it
   
   
enablea2sd () {
echo "mount and set perms"
echo "enablea2sd mount and set perms" >> /data/mountall-script-debug.sh
busybox chown 1000:1000 /sd-ext;
busybox chmod 777 /sd-ext;
echo "move apps from internal memory to sdcard"
echo "move apps from internal memory to sdcard" >> /data/mountall-script-debug.sh
for i in app
do
if [ -h /data/$i ]; then
rm -rf /data/$i
fi;
if [ ! -d /sd-ext/$i ]; then
mkdir /sd-ext/$i;
chown 1000:1000 /sd-ext/$i
fi;
if [ ! -d /data/$i ]; then
mkdir /data/$i
chown 1000:1000 /data/$i
fi;
if [ -d /data/$i ]; then
cp -a /data/$i/* /sd-ext/$i/
rm -f /data/$i/*
mount --bind /sd-ext/$i /data/$i
chown 1000:1000 /sd-ext/$i
chmod 777 /sd-ext/$i -R
fi;
done;

for p in app-private;
do
if [ -h /data/$p ]; then
rm -rf /data/$p
fi;
if [ ! -d /sd-ext/$p ]; then
mkdir /sd-ext/$p;
chown 1000:1000 /sd-ext/$p
fi;
if [ ! -d /data/$p ]; then
mkdir /data/$p
chown 1000:1000 /data/$p
fi;
if [ -d /data/app-private ]; then
cp -a /data/app-private/* /sd-ext/app-private/
rm -f /data/app-private/*
mount --bind /sd-ext/app-private /data/app-private
chown 1000:1000 /sd-ext/app-private
chmod 777 /sd-ext/app-private -R
fi;
done;

busybox chown 1000:1000 /sd-ext/$i;
busybox chmod 777 /sd-ext/$i

# clean up old whiteouts
for i in local misc property system tombstones;
do
if [ -h /sd-ext/$i ]; then
rm -f /sd-ext/$i;
fi
done;
       
# please don't put odex files in the app directory people
# it causes dexopt to crash when switching builds
busybox rm -f /sd-ext/app/*.odex
       
setprop oxygen.a2sd.active 1;

echo "sd-ext-ok" > /sd-ext/ext-ok
           
echo "+++ Apps-to-SD successfully enabled";
echo "+++ Apps-to-SD successfully enabled" >> /data/mountall-script-debug.sh    
}

disablea2sd () {    # replace symlinks with directories so we can boot without sd
for i in app app-private;
do
if [ -h /data/$i ];
then
rm -rf /data/$i;
mkdir /data/$i;
busybox chown 1000:1000 /data/$i;
busybox chmod 777 /data/$i;
fi;
done;
           
setprop oxygen.a2sd.active 0;
}
           
if [ -e /dev/block/mmcblk0p1 ]; # We check for the presence of the FAT partition first to see if the SD has initialised.
then
echo "SD Card has been initialised...checking for ext partition.";
echo "SD Card has been initialised...checking for ext partition."; >> /data/mountall-script-debug.sh
if  [ -e /dev/block/mmcblk0p2 ]; # If false, it isn't there so we don't have to sleep the script and delay the boot.
then
enablea2sd;
else
echo "No ext partition present, apps2sd disabled";
echo "No ext partition present, apps2sd disabled" >> /data/mountall-script-debug.sh
disablea2sd;
fi;
else
sleep 4; #Enables time for a slow SD to be detected and populate the device nodes.
if [ -e /dev/block/mmcblk0p2 ];
then
echo "enablea2sd for slow SD card";
echo "enablea2sd for slow SD card" >> /data/mountall-script-debug.sh
enablea2sd;
else
echo "No ext partition present after sleep, apps2sd disabled";
echo "No ext partition present after sleep, apps2sd disabled" >> /data/mountall-script-debug.sh
disablea2sd;
fi;
fi;
sync; 
}
############################################
#Trigger, without # =ON with #OFF default=ON warning. do not add # at Apps2SD-Script, if you wish to disable apps2SD then remove # at disablea2sd below.

Apps2SD-Script

############################################
#Trigger, without # =ON with #OFF default=OFF

#disablea2sd

##############################################################################################################################################
#This is in case that ROM looks for dalvik in cache. also fix recovery.

Mount-Dalvik-Cache-to-Cache-folder-and-fix-recovery () {

echo "Mounting Dalvik also to cache for ROM in case needed" >> /data/mountall-script-debug.sh
if [ ! -d /cache/dalvik-cache ]; then
mkdir /cache/dalvik-cache
fi
chown 1000:1000 /cache/dalvik-cache
chmod 777 /cache/dalvik-cache
mount -o bind /sd-ext/dalvik-cache /cache/dalvik-cache

if [ ! -d /mnt/cache ]; then
mkdir /mnt/cache
fi
if [ ! -d /mnt/cache/recovery ]; then
mkdir /mnt/cache/recovery
fi
chmod 777 /mnt/cache/recovery

if [ -h /cache/recovery ]; then
rm -rf /cache/recovery
mkdir /cache/recovery
chown 1000:2001 /cache/recovery
chmod 777 /cache/recovery
fi
}
############################################
#Trigger, without # =ON with #OFF default=ON

Mount-Dalvik-Cache-to-Cache-folder-and-fix-recovery

##############################################################################################################################################
#This script will check if your EXT has more than 250MB free before DATA move. if no room data will remain in NAND data partition.
#If found 250mb FREE on EXT then you will see light blink. = GREEN ON/OF - RED ON/OFF - GREEN ON/OF - RED ON and OFF when data transfered.

Check-and-move-DATA-To-EXT () {

if  [ -e /sd-ext/ext-ok ]; then
echo "checking if you have more than 250MB free on EXT before DATA move." >> /data/mountall-script-debug.sh
echo "checking if you have more than 250MB free on EXT before DATA move."
EXTSIZE=$(df -k /sd-ext | tail -n1 | tr -s ' ' | cut -d ' ' -f4)
if [ $EXTSIZE -gt 250000 ]; then
echo "Cool You have more than 250MB free on EXT partition moving data to EXT"
echo "Cool You have more than 250MB free on EXT partition moving data to EXT" >> /data/mountall-script-debug.sh
sync
sysctl -p
if [ ! -d /sd-ext/data ]; then
mkdir /sd-ext/data
chmod 777 /sd-ext/data
chown 1000:1000 /sd-ext/data
fi
if [ ! -d /data/data ]; then
mkdir /data/data
chmod 777 /data/data
chown 1000:1000 /data/data
fi
echo "Copy Data to EXT" >> /data/mountall-script-debug.sh
echo "Copy Data to EXT"
cd /sd-ext/data
find . ! -name . -prune -type l -exec rm {} \;
cd /data/data
find . ! -name . -prune -type l -exec rm {} \;
cp -a /data/data/* /sd-ext/data/ 2> /dev/null
echo "data moved OK" > /data/data-on-ext-now
echo "GOOD data moved OK"
echo "GOOD data moved OK" >> /data/mountall-script-debug.sh
chmod 444 /data/data-on-ext-now
else
echo "YOU DONT HAVE ROOM FOR DATA ON EXT PARTITION YOU NEED 250MB FREE"
echo "YOU DONT HAVE ROOM FOR DATA ON EXT PARTITION YOU NEED 250MB FREE" >> /data/mountall-script-debug.sh
fi
fi
}
if [ -e /data/data-on-ext-now ]; then
echo "Activating DATA BIND from EXT to DATA"
echo "Activating DATA BIND from EXT to DATA" >> /data/mountall-script-debug.sh
rm -rf /data/data/* 2> /dev/null
mount --bind /sd-ext/data /data/data
echo "You moved the DATA to EXT All OK"
echo "You moved the DATA to EXT All OK" >> /data/mountall-script-debug.sh
sync
sysctl -p
fi

############################################
#Trigger, without # =ON with #OFF default=OFF

#Check-and-move-DATA-To-EXT

##############################################################################################################################################

#Remount Debug to NONE to reduce resource drain.
if [ -e /sys/kernel/debug ]; then
umount /sys/kernel/debug
mount -t debugfs none /sys/kernel/debug
fi
##############################################################################################################################################
#This mod will move system + user APPS + DATA to NAND in case that DATA was moved to EXT!

Mod2-Update () {

if  [ -e /sd-ext/ext-ok ]; then
if [ -e /data/data-on-ext-now ]; then
echo "Moving NEW user data to nand to release the SDCARD for RAM Services"
echo "Moving NEW user data to nand to release the SDCARD for RAM Services" >> /data/mountall-script-debug.sh
DATASIZE=$(df -k /data | tail -n1 | tr -s ' ' | cut -d ' ' -f4)
if [ $DATASIZE -gt 70000 ]; then
if [ ! -d /data/data-nand ]; then
mkdir /data/data-nand
chown 1000:1000 /data/data-nand
chmod 777 /data/data-nand
fi
#####################################################################
cd /sd-ext/data
find . ! -name . -prune -type l -exec rm {} \;
#Dorimanx added apps data, new and old.
cp -a com.protocol.x.USB  /data/data-nand/ 2> /dev/null
cp -a com.innowebtech.g0t0  /data/data-nand/ 2> /dev/null
cp -a xxbcn.AllAppsOrganizerPlusB /data/data-nand/ 2> /dev/null
cp -a com.fede.launcher /data/data-nand/ 2> /dev/null
cp -a com.nitrodesk.droid20.nitroid /data/data-nand/ 2> /dev/null
cp -a net.xdevelop.rotator* /data/data-nand 2> /dev/null
cp -a com.rechild.advancedtaskkille* /data/data-nand 2> /dev/null
cp -a com.quoord.tapatalk* /data/data-nand 2> /dev/null
cp -a ccc71.bmw.pro /data/data-nand 2> /dev/null
cp -a ccc71.pmw.pro /data/data-nand 2> /dev/null
cp -a com.sebastian.seal /data/data-nand 2> /dev/null
cp -a org.adwfreak.launcher /data/data-nand 2> /dev/null
cp -a net.dinglisch.android.taskerm* /data/data-nand 2> /dev/null
cp -a mobi.mgeek.TunnyBrowser* /data/data-nand 2> /dev/null
cp -a net.rgruet.android.g3watchdog* /data/data-nand 2> /dev/null
cp -a com.dropbox.android* /data/data-nand 2> /dev/null
cp -a com.keramidas.titaniumbackup* /data/data-nand 2> /dev/null
cp -a de.shapeservices.implus* /data/data-nand 2> /dev/null
cp -a uk.co.blueNotify* /data/data-nand 2> /dev/null
cp -a com.handcent.nextsms* /data/data-nand 2> /dev/null
cp -a com.handcent.lang.nextsms* /data/data-nand 2> /dev/null
cp -a com.adobe.flashplayer* /data/data-nand 2> /dev/null
cp -a com.dooblou.WiFiFileExplorer* /data/data-nand 2> /dev/null
cp -a com.maxmpz.audioplayer* /data/data-nand 2> /dev/null
cp -a com.opera.browser* /data/data-nand 2> /dev/null
cp -a com.qs.enhancedemail* /data/data-nand 2> /dev/null
cp -a com.tomanyz.lockWatch* /data/data-nand 2> /dev/null
cp -a com.snapwood.smugfolio* /data/data-nand 2> /dev/null
cp -a com.whatsapp* /data/data-nand 2> /dev/null
cp -a com.infonetservice.phono* /data/data-nand 2> /dev/null
cp -a se.catharsis.android.calendar* /data/data-nand 2> /dev/null
cp -a org.uguess.android.sysinfo.* /data/data-nand 2> /dev/null
cp -a com.alienmanfc6.wheresmydroid* /data/data-nand 2> /dev/null
cp -a com.snowbee.colorize* /data/data-nand 2> /dev/null
cp -a com.netqin.mobileguard* /data/data-nand 2> /dev/null
cp -a org.zeam* /data/data-nand 2> /dev/null
cp -a com.Amazon.kindle* /data/data-nand 2> /dev/null
cp -a com.ebay.mobile* /data/data-nand 2> /dev/null
cp -a com.imdb.mobile* /data/data-nand 2> /dev/null
cp -a org.iii.romulus.meridian* /data/data-nand 2> /dev/null
cp -a com.speedsoftware.rootexplorer* /data/data-nand 2> /dev/null
cp -a hk.suiaing.android.lock.screenlock* /data/data-nand 2> /dev/null
cp -a nextapp.systempanel* /data/data-nand 2> /dev/null
cp -a com.facebook.katana* /data/data-nand 2> /dev/null
cp -a com.abcOrganizer.* /data/data-nand 2> /dev/null
cp -a com.mediawoz.goweather* /data/data-nand 2> /dev/null
cp -a org.gpo.greenpower* /data/data-nand 2> /dev/null
cp -a com.zegoggles.smssync* /data/data-nand 2> /dev/null
cp -a com.swype.android.inputmethod* /data/data-nand 2> /dev/null
cp -a com.it.braincrash.volumeace* /data/data-nand 2> /dev/null
cp -a com.alk.copilot.eumarket.* /data/data-nand 2> /dev/null
cp -a com.sirma.mobile.bible.android* /data/data-nand 2> /dev/null
cp -a com.bt.android.elixir* /data/data-nand 2> /dev/null
cp -a de.stohelit.folderplayer* /data/data-nand 2> /dev/null
cp -a com.osa.android.navdroyd* /data/data-nand 2> /dev/null
cp -a com.carl.tc* /data/data-nand 2> /dev/null
cp -a com.gau.go.* /data/data-nand 2> /dev/null
##########################################################################################################
#User apps data
#Add here you custome apps. use example, cp -a YOUR APP DATA FOLDER /data/data-nand 2> /dev/null
#After you finish adding, REBOOT. your app data will be moved to NAND and files in sd-ext will be deleted.


##########################################################################################################
echo "NEW-data-nand-migrated" >> /data/mountall-script-debug.sh
##########################################################################################################
DATAEXTDELETE=`ls /data/data-nand`;
for c in $DATAEXTDELETE
do
rm -rf /sd-ext/data/$c
done

echo "data-nand-migrated" > /data/data-nand-migrated

#Mount data to /data/data
ln -s /data/data-nand/* /sd-ext/data/
#done
echo "DATA of Migrated to NAND Apps, deleted from sd-ext."
echo "DATA of Migrated to NAND Apps, deleted from sd-ext." >> /data/mountall-script-debug.sh
echo "System DATA and limited app DATA Mounted."
echo "System DATA and limited app DATA Mounted." >> /data/mountall-script-debug.sh
cd /
else
echo "Your data partiotion dont have 70MB FREE for SYSTEM NAND MOD"
echo "Your data partiotion dont have 70MB FREE for SYSTEM NAND MOD" >> /data/mountall-script-debug.sh
fi
else
echo "You didnt moved DATA TO EXT with MOD #1, you cant use MOD #2, first move all data to EXT"
echo "You didnt moved DATA TO EXT with MOD #1, you cant use MOD #2, first move all data to EXT" >> /data/mountall-script-debug.sh
fi
fi
}

##############################################
#Trigger, without # =ON with #OFF default=ON
#This is the MOD #2 Moving NEW DATA for system to use them from NAND to speedup.

#Mod2-Update

##############################################################################################################################################
BOOT-UP-FIX () {

if  [ -e /sd-ext/ext-ok ]; then
if [ -e /data/first-boot ]; then
cd /sd-ext/data
find . ! -name . -prune -type l -exec rm {} \;
cp -a /data/data-nand/* /sd-ext/data 2> /dev/null
rm -rf /data/data-nand/* 2> /dev/null
rm -f /data/first-boot 2> /dev/null
echo "dalvik-cache" > /sd-ext/dalvik-cache/cache-ok
fi
fi
}
##############################################
#Trigger, without # =ON with #OFF default=ON

BOOT-UP-FIX

##############################################################################################################################################
DALVIK-CACHE-FIX () {

if  [ -e /sd-ext/ext-ok ]; then
if [ ! -e /sd-ext/dalvik-cache/cache-ok ]; then
cd /sd-ext/data
find . ! -name . -prune -type l -exec rm {} \;
cp -a /data/data-nand/* /sd-ext/data 2> /dev/null
rm -rf /data/data-nand/* 2> /dev/null
echo "dalvik-cache" > /sd-ext/dalvik-cache/cache-ok
fi
fi
}
##############################################
#Trigger, without # =ON with #OFF default=ON

DALVIK-CACHE-FIX

##############################################################################################################################################

echo "Fixing System Owners"
busybox chown 0:2000 /system/etc/init.d/*
busybox chown 0:0 /cache
busybox chown 1000:2001 /cache/recovery
busybox chown 1000:1000 /cache/dalvik-cache
busybox chown 1000:2001 /cache/recovery
busybox chown 1000:1000 /dev/smd27
busybox chown 0:0 /dev
busybox chown 0:0 /system/lib/*
busybox chown 0:0 /system/lib/hw/*
busybox chown 0:2000 /dev/cpu_dma_latency

echo "Fixing System permissions"
busybox chmod 777 /dev/smd27
busybox chmod 755 /dev
busybox chmod 777 /dev/cpu_dma_latency
busybox chmod 755 /system/etc/init.d/*
busybox chmod 644 /system/etc/gps.conf
busybox chmod 644 /system/etc/hosts
busybox chmod 644 /system/etc/sysctl.conf
busybox chmod 777 /system/lib/*
busybox chmod 777 /system/lib/hw/*
busybox chmod 755 /system/lib/egl/*
busybox chmod 644 /system/build.prop
busybox chmod 777 /cache/ -R
echo "DONE"

##############################################################################################################################################
#This will copy the SU to xbin also and remove the simlink

CopyRoot () {
 
#Checking and fixing ROOT
rm -rf /system/xbin/su
cp /system/bin/su /system/xbin/
chmod 6777 /system/xbin/su
chown 0:0 /system/xbin/su
#Done
}
############################################
#Trigger, without # =ON with #OFF default=ON

CopyRoot

##############################################################################################################################################
#This is ZIP Align Script. it's will fix all the apps in /system/app and in /sd-ext/app every boot, already alinged apps will not be checked again.
#Temp dir is on SDCARD to give all big apps a chance to be fixed.

ZIPALIGN () {
echo "Activating zipalign for all apps"
echo "Activating zipalign for all apps" >> /data/mountall-script-debug.sh

LOG_FILE=/data/zipalign.log
ZIPALIGNDB=/data/zipalign.dba
SYSTEM=$(mount|grep "/system "|awk '{ print $1 }')

[ -e $LOG_FILE ] && rm $LOG_FILE
[ -f $ZIPALIGNDB ] || touch $ZIPALIGNDB

MissingApps=`cat /data/zipalign.dba | grep eu.chainfire.cf3d`
if [ $MissingApps !=eu.chainfire.cf3d ]; then
echo "/data/app/eu.chainfire.cf3d-1.apk" >> /data/zipalign.dba
echo "adding Missing APPS"
else
echo "Missing Apps Already Added"
fi

echo "Starting Dorimanx Automatic ZipAlign $( date +"%m-%d-%Y %H:%M:%S" )" | tee -a $LOG_FILE
mount -t vfat /dev/block/vold/179:1 /mnt/sdcard

for DIR in /system/app /data/app ; do
cd $DIR
for APK in *.apk ; do
if [ $APK -ot $ZIPALIGNDB ] && [ $(grep "$DIR/$APK" $ZIPALIGNDB|wc -l) -gt 0 ] ; then
echo "Already checked: $DIR/$APK" | tee -a $LOG_FILE
else
zipalign -c 4 $APK
if [ $? -eq 0 ] ; then
echo "Already aligned: $DIR/$APK" | tee -a $LOG_FILE
grep "$DIR/$APK" $ZIPALIGNDB > /dev/null || echo $DIR/$APK >> $ZIPALIGNDB
else
echo "Now aligning: $DIR/$APK" | tee -a $LOG_FILE
if [ ! -d /mnt/sdcard/zipalign ]; then
mkdir /mnt/sdcard/zipalign
chmod 777 /mnt/sdcard/zipalign
fi
zipalign -f 4 $APK /mnt/sdcard/zipalign/$APK
cp -a /mnt/sdcard/zipalign/$APK $APK
rm -f /mnt/sdcard/zipalign/$APK
chmod 644 /system/app/*
chmod 644 /data/app/*
chown 1000:1000 /system/app/*
chown 1000:1000 /data/app/*
grep "$DIR/$APK" $ZIPALIGNDB > /dev/null || echo $DIR/$APK >> $ZIPALIGNDB
fi
fi
done
done

touch $ZIPALIGNDB
umount /mnt/sdcard

echo "Automatic ZipAlign finished at $( date +"%m-%d-%Y %H:%M:%S" )" | tee -a $LOG_FILE
echo "Automatic ZipAlign finished" >> /data/mountall-script-debug.sh
}
############################################
#Trigger, without # =ON with #OFF default=ON

ZIPALIGN

##############################################################################################################################################

echo "Writing debug info for dorimanx support. file name /data/mountall-script-debug.sh, post it if you have problems"
if [ -d /sd-ext/data ] && [ -e /data/data-on-ext-now ]; then
echo "DATA IS ON EXT MOD #1 ONLINE" >> /data/mountall-script-debug.sh
else
echo "DATA IS ON NAND, MOD #1 is OFFLINE" >> /data/mountall-script-debug.sh
fi

if [ -e /data/data-nand-migrated ]; then
echo "System DATA and Choosen DATA migrated to NAND, MOD #2 ONLINE" >> /data/mountall-script-debug.sh
else
echo "MOD #2 not activated"
fi

echo "Starting the Android Virtual Machine, let the HIGH POWER be with you, ROM DEV DORIMANX"
echo "Starting the Android Virtual Machine, let the HIGH POWER be with you, ROM DEV DORIMANX" >> /data/mountall-script-debug.sh

echo "Pre BOOT finish" >> /data/mountall-script-debug.sh
date >> /data/mountall-script-debug.sh

start

# execute any postinstall script then kill it
if [ -e /data/firstboot.sh ];
then
   log -p i -t boot "Executing firstboot.sh..";
   logwrapper /system/bin/sh /data/firstboot.sh;
   rm -f /data/firstboot.sh;
fi;

echo "ALL DONE, END OF FILE"
sleep 2
echo 0 > /sys/devices/platform/leds-microp/leds/amber/brightness
sleep 2
exit 1
MY /BOOT/initrd.gz changes:

init.htcleo.rc (all credits to Tytung!!! i just make some edits)
init.rc (all credits to Tytung!!! i just make some edits)
logo.lge

To Extract the initrd.gz
copy the initrd.gz to sdcard
mkdir /initdir
cd /initdir
cp /sdcard/initrd.gz /initdir
chmod 777 initrd.gz
chown 0:0 initrd.gz
zcat initrd.gz | cpio -i -d
rm initrd.gz

EDIT What you want!

Pack the files back to initrd.gz

find . | cpio -o -H newc | gzip -9 > initrd.gz

you can then use this initrd.gz for MAG ROM (copy to boot inside ROM zip)

Or you need to compile it with the kernel module for CLK!

HOW to Compile CLK boot.img

take the zImage , initrd.gz , mkbootimg, and copy to ANY Linux BOX not the PHONE!!!
i used Centos 5
and winscp to transfer files to linux box.

mkdir /clkboot
Copy all 3 files to /clkboot
cd /clkboot
chown 0:0 *
chmod 777 *

run this:

mkbootimg --kernel zImage --ramdisk initrd.gz --cmdline "console=null" --base 0x11800000 -o boot.img

ls -la
you will see the new boot.img

copy in to main root dir on zipped CLK rom.

i will attach the mkbootimg as zip extract it when copying to Linux box.

also there are 2 more files.

repack-bootimg.pl
and
unpack-bootimg.pl

one of them unpack the boot.img extract the initrd.gz + kernel.gz (create folder with all files only for initrd.gz)

and the repack-bootimg.pl will get all back to boot-new.img (in rom folder it's should be as boot.img)

HAVE FUN!

Attached Files
File Type: zip initrd-only-changes.ZIP - [Click for QR Code] (27.8 KB, 271 views)
File Type: zip mkbootimg.zip - [Click for QR Code] (13.5 KB, 238 views)
Last edited by dorimanx; 23rd November 2011 at 10:34 AM.
The Following 64 Users Say Thank You to dorimanx For This Useful Post: [ View ]
13th July 2011, 01:48 PM   |  #5  
beston94's Avatar
Senior Member
Flag Stockholm
Thanks Meter: 430
 
1,609 posts
Join Date:Joined: Apr 2010
More
wWOWOO Im going to test now!! Cant wati but are the recovery partitions in the rom or are they 150 and cache 5?

Edit: Bootanimation is craZY1!!!! really nice one!!
oh and rom fast as lightning!!
Last edited by beston94; 13th July 2011 at 02:35 PM.
The Following 4 Users Say Thank You to beston94 For This Useful Post: [ View ]
13th July 2011, 01:56 PM   |  #6  
feanor91's Avatar
Senior Member
Flag Paris
Thanks Meter: 49
 
538 posts
Join Date:Joined: Feb 2009
More
Hi man, I download 2.5.0 now, I will try for swap.

Your too fast man, your too fast....
The Following 2 Users Say Thank You to feanor91 For This Useful Post: [ View ]
13th July 2011, 01:57 PM   |  #7  
Rudyfastcat's Avatar
Senior Member
Flag San Antonio, TX
Thanks Meter: 110
 
597 posts
Join Date:Joined: Jun 2010
More
All right lets have some fun
Just flashed new v2.5.0

You have tried the rest now get ready to try the best!

From my HD2 with Dorimanx Nandroid
Last edited by Rudyfastcat; 6th August 2011 at 03:01 AM.
The Following 2 Users Say Thank You to Rudyfastcat For This Useful Post: [ View ]
13th July 2011, 02:01 PM   |  #8  
mzebrowski13's Avatar
Senior Member
Flag Warsaw
Thanks Meter: 58
 
382 posts
Join Date:Joined: Jun 2010
More
New sheriff in town, let's play
The Following User Says Thank You to mzebrowski13 For This Useful Post: [ View ]
13th July 2011, 02:01 PM   |  #9  
Member
Thanks Meter: 0
 
49 posts
Join Date:Joined: Sep 2010
I do not use the swap,so is that right for me to choose the HIHG-END rom?
13th July 2011, 02:15 PM   |  #10  
Senior Member
Flag Singapore
Thanks Meter: 3
 
127 posts
Join Date:Joined: Mar 2010
More
err sorry but what does SWAP do?

Post Reply Subscribe to Thread

Tags
best rom, clk, dorimanx, fastest rom, gaming rom, home refresh, htc hd2 nandroid, kernel, mag, preformance, tweaked, tweaks, typhoon
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes