SGS2 getRIL Database

---

Hi, I'm on a Galaxy SII (I9100), latest CM9 Nightly (20120708); I downloaded 15+ basebands to test out, because my calls kept dropping, but after I flash them I can't seem to find a compatible RIL in getRIL.

The only options that show up (no matter what radio I flash) are: I9100XXLPX and I9100XXLPW, which aren't working very well in my area.

I flashed:

I9100XXKH3
I9100XXKG5
I9100XXKI3
I9100XXKI4
I9100NEKF2
I9100XXLPQ
I9100XXLPS
I9100XXLPW
I9100XXLQ5

and a few others I can't remember.

Is there anyway way to update the database manually? Get more RILs? Ideally I'd like a matching RIL for KI3, KH3 and LQ5.

Thanks a lot for any help you can give me.

EDIT: Also, I know GetRIL adds a file somewhere if you check the "Keep RIL after ROM flash" option. Once I uncheck it and reflash my ROM, the RIL stays the same. So there's no delete built in. Could you per chance tell me where to find the file so I can delete it? Thanks!

Support for LG Prada 3.0 P940

---

Hi Sibbor,

Can you please extend Get RIL support for LG Prada 3.0 P940 too??. Coz I'm facing problems with outgoing calls on 3G network.
I would be grateful if you could kindly check my post and advice:

http://forum.xda-developers.com/show...3#post28696103

Thanks

I have rooted my 3D and install busybox from market..Now i open GetRil and it says No permission features that requires root and busybox are disabled :S ??? Why??

---------- Post added at 02:43 PM ---------- Previous post was at 02:23 PM ----------

Now i make it..Now i chose baseband and click download and it says dowloading and installing and installation finished..but baseband doesn't change

Originally Posted by big noob

I have rooted my 3D and install busybox from market..Now i open GetRil and it says No permission features that requires root and busybox are disabled :S ??? Why??

---------- Post added at 02:43 PM ---------- Previous post was at 02:23 PM ----------

Now i make it..Now i chose baseband and click download and it says dowloading and installing and installation finished..but baseband doesn't change

Of course baseband will not change because getril is the application to download only ril nothing else if you want to change baseband you need to look for baseband and flash it using smartflash

Sent from my Optimus 2X using xda premium

but i flash it with smartflash too and it always show me the same baseband.. :s i'm getting crazy

here is log from smartflash while updating baseband:


00:01.0 Sec ownload Start...
00:01.1 Sec :EMMC download start
00:01.1 Sec :Target is resetting
00:01.1 Sec ownload complete

a little change:
00:00.1 Sec ownload Start...
00:02.1 Sec :RomBinary Download start
00:02.2 Sec :PSI RAM writing start
00:02.2 Sec :Trying to communicate with IFX modem
00:07.7 Sec :Confirm IFX communication
00:07.7 Sec :PSI RAM writing end
00:07.7 Sec :Start PSI RAM
00:07.7 Sec :EBL writing start
00:24.2 Sec :Start EBL
00:24.2 Sec :Set capabilities to be used
00:26.2 Sec :Baudrate Change: 115200bps ===> 3000000bps
00:26.5 Sec :Set flash ID complete
00:26.5 Sec :Set Infineon CFI Information 1
00:26.5 Sec :Set Infineon CFI Information 2
00:26.5 Sec :PSI Download start
00:26.7 Sec :Set FLASH address
00:26.8 Sec :PSI Download success
00:26.8 Sec :SLB Download start
00:27.0 Sec :Set FLASH address
00:28.3 Sec :SLB Download success
00:28.3 Sec :Aeneas Download start
00:29.3 Sec :Erase was executed rightly!
00:29.4 Sec :Set FLASH address
00:32.3 Sec :Aeneas Download success
00:32.3 Sec :RomBinary Download success
00:32.3 Sec :Target is resetting
00:32.4 Sec ownload complete
but it's same baseband..

Originally Posted by big noob

but i flash it with smartflash too and it always show me the same baseband.. :s i'm getting crazy
.

smartflash doesn't work on the O3D. I have wasted hours a few months back. Use the kdz method.

Taking RIL from Samsung Rom and insert it into AOSP ROM?

---

1.) Hi is is possible to take the RIL file from the newest samsung rom for the Galaxy S2 (XWLPO) and insert it an AOSP rom (Slim ROM 4.2)

2.) What exactly is the RIL file? Is it located in /system or some other place?

GetRIL 0.9.4 out - on its own first birthday!

---

Hi there everyone! I'm at vacation, but manage to squeeze in some coding time meanwhile the family is sleeping. I'm not able to answer your questions now, so I'll need to get back to you at a later point. HOWEVER, please enjoy this new version in the meantime:

GetRIL celebrates its first birthday!
One year ago I relased version 0.1 of GetRIL. Since then a lot of things have happend and the project has grown over time. It takes a lot of my spare time, but I enjoy [almost] every second of developing it! Still aiming to push version 1.0 out that door, once it's done.

I just wanted to take the time and say 'Thank You!'. With Your kind words, ratings, donations & purchases (and don't let us forget the thousands RIL reports and logs you send me!) you're encouraging and motivating me to keep developing this app. You all make this app a possibility!

Version 0.9.4 (2012/07/27)

• Enabled support for Nexus S (crespo) + Galaxy Nexus (toro)
• If an unknown RIL is found a force-update of the RIL database is done if the RIL database is older than 60 minutes (yes, I'm remotely trying to add RILs asap :P)
• The system partition remount process is a bit smoother
• The download dialog now contains status messages for remounting etc.

Great consistant work sibbor
Thankfull

Sent from my LG-P990 using Tapatalk 2

Originally Posted by mcmanuf

1.)

2.) What exactly is the RIL file? Is it located in /system or some other place?

+1 to that...
cheers/H