My uncle was trying to update his Galaxy S via Kies in Windows and the update failed while installing and he was left with a brick, could only boot into download mode while holding down vol down and power buttons or yellow sign with exclamation if only pressing power.

So he gave it to me to unbrick and I use a Mac so I downloaded Heimdall and XXJVU (2.3.6), device was detected by Heimdall and so I proceded with loading that package and this is what I got:

ERROR: Failed to confirm end of PIT file transfer!
PIT upload failed!
Ending session...
Rebooting device...

The screen went black and now the phone is completely dead, I've tried removing the battery, the USB cable, and different combinations of either or plugged in while holding down various combinations of buttons and cannot get the phone to show any signs of life whatsoever.

Uncles phone was a SGS Captivate from Rogers Canada and prior to his failed update it was running 2.2 Froyo

*UPDATE: Pulled battery and removed cable for several minutes, also pressed the power button and held it in for a minute to discharge any remaining power...replaced battery and held vol down + power button and I'm back in download mode

Hi, I am facing similar problem with custom flash.

I am trying to repair my galaxy anycall (korea) with stock rom and ODIN doesnt recognize it. so trying Heimdall but there is no stock korean romfor this.

I tried to custom flash but it stuck at modem with an error. Failed to confirm end of pit.

I've replaced the files with kroean versions during the update but failed.


Any help showing step-by-step on creating heimdall package would be greatly appreciated.

I9000T latin america

---

Thanks muchly aorth

Any chance to get a Heimdall package of these Latin American ROM's?

http://forum.xda-developers.com/show...=953622&page=4

Ok. Finally managed to create a Heimdall file for Anycall Galaxy. problem solved. Thanks a ton to Heimdall..Below are the mediafire links if any one interested.

ROM - M110S-Gingerbread-HOME-IMAGE-REV03-WC13-1023-USER. I've to split it in to two files. You can combine with HJSPLIT

http://www.mediafire.com/?dkb1v53q6g54b58
http://www.mediafire.com/?208p10tkbki6w40

I've updated my 'semi-bricked' Anycall Galaxy M110S with this and confirm working fine.

Thanks to xsenman & rest of the team for providing the Stock ROM & tips.

Originally Posted by bobbytomorow

My uncle was trying to update his Galaxy S via Kies in Windows and the update failed while installing and he was left with a brick, could only boot into download mode while holding down vol down and power buttons or yellow sign with exclamation if only pressing power.

So he gave it to me to unbrick and I use a Mac so I downloaded Heimdall and XXJVU (2.3.6), device was detected by Heimdall and so I proceded with loading that package and this is what I got:

ERROR: Failed to confirm end of PIT file transfer!
PIT upload failed!
Ending session...
Rebooting device...

The screen went black and now the phone is completely dead, I've tried removing the battery, the USB cable, and different combinations of either or plugged in while holding down various combinations of buttons and cannot get the phone to show any signs of life whatsoever.

Uncles phone was a SGS Captivate from Rogers Canada and prior to his failed update it was running 2.2 Froyo

*UPDATE: Pulled battery and removed cable for several minutes, also pressed the power button and held it in for a minute to discharge any remaining power...replaced battery and held vol down + power button and I'm back in download mode

Ah, yes. Heimdall 1.3.2 has a bug with flashing some of the larger files in a ROM. I'd recommend staying with 1.3.1 or 1.3.0.

Thanks for the work. Made downgrading to stock galaxy and upgrading to CM9 few minutes of work (had some troubles with CM7, checking CM9 now or I'll downgrade again to stock...)

Since I only run Linux, the Heimdall Packages are very appreciated!

thanks

creat package where put these

---

I try to make a heimdall package from stock rom XDA but where i can put
System.rfs and normalboot.img

I should have this

IBL+PBL ----> boot.bin
EFS ----->
SBL -----> Sbl.bin
PARAM -----> param.lfs
KERNEL -----> Zimage
RECOVERY ----->
CACHE -----> cache.rfs
MODEM -----> modem.bin
FACTORYFS ----->factoryfs.rfs
DBDATAFS ----->dbdata.rfs

??

Thanks for the packages I thought nobody would ever use the Heimdall package format
Any chance you could host JVU somewhere other than BayFiles? I get this error every time I try it:
"The web page at http://dl/abe2edb8/50362ccf/0/516a9a...eimdall.tar.gz might be temporarily down or it may have moved permanently to a new web address."

Originally Posted by fishears

Thanks for the packages I thought nobody would ever use the Heimdall package format
Any chance you could host JVU somewhere other than BayFiles? I get this error every time I try it:
"The web page at http://dl/abe2edb8/50362ccf/0/516a9a...eimdall.tar.gz might be temporarily down or it may have moved permanently to a new web address."

I make one you could find it here
http://dl.free.fr/nFNgm3fTm

and you have someone also here
http://bayfiles.com/file/1MfL/MMGg1E...eimdall.tar.gz