[Kernel][KG2]Bali Tweaks + OC! 1.28Ghz

---

I added kernel tweaks from raspdeep's I9000 OC and got our bali kernel to OC, I'm running at 1.2 Ghz right now. I haven't tested this in terms of battery life, but there's a good chance your battery life may be less. So use with caution.

This 1.2 Ghz OC feels smoother and faster than stock, and better and more stable than 1.28Ghz. If you tried the 1.28 and gave up, try this 1.2, it's much better. I removed the link to the 1.28Ghz kernel because it was causing too many problems for everyone, and actually being slower due to freezing and overheating.

Battery life and stability not guaranteed

Use setcpu to control your cpu speed.

Credits to Dr. Honk for bali original, and raspdeep for OC source.

THIS IS FOR KG2 ONLY!

I have flashed this both on stock and on a custom KG2 rom, they both worked.

link removed because it was unstable - 1.28Ghz

Updated 1.2 KERNEL: http://www.multiupload.com/3QPMQY476F

3:55PM 8/3/2011

I provide no guarantees that this will work, make a backup before you try this!

This was really only made for all the kids who kept asking for an OC kernel.

It has been suggested that the 1.2Ghz kernel may be more stable, so I would suggest trying that one instead of the 1.28Ghz kernel

Flashing right now . You beat me too it ;p

Originally Posted by sduvick

I added kernel tweaks from raspdeep's I9000 OC and got our bali kernel to OC, I'm running at 1.28 Ghz right now. I haven't tested this in terms of battery life, but there's a good chance your battery life may be less. So use with caution.

Use setcpu to control your cpu speed.

Credits to Dr. Honk for bali original, and raspdeep for OC source.

THIS IS FOR KG2 ONLY!

Flash through CWM as usual, I've tested flashing it and it worked fine for me, so it should work for you.

http://www.multiupload.com/WLONR4WAA6

I'll try adding in UV mods later, but I have to go home from work for now.

Remember once you add UV to check the voltage . Just a reminder & The kernel flash's but it auto-reboot's & then stay's stuck on SK4G splash screen .

Originally Posted by sduvick

I'll try adding in UV mods later, but I have to go home from work for now.

Check it again, teddy says it works

Sent from my SGH-T839 using XDA App

Im stuck at boot as well.

Sent from my SGH-T839 using XDA App

I knew i wasn't the only one .

Originally Posted by JoshEwAhh

Im stuck at boot as well.

Sent from my SGH-T839 using XDA App

Should I just flash the old kernel?

Sent from my SGH-T839 using XDA App

Now that your at boot screen you have to ODIN to KG2

Originally Posted by JoshEwAhh

Should I just flash the old kernel?

Sent from my SGH-T839 using XDA App

I rebooted to cwm

Sent from my SGH-T839 using XDA App