If you've ever flashed a new rom, updated a firmware, or plain reformatted - all because you just had to have the newest __blank__? Then you have come to the right place. Nightlies are addictive and exciting, but can be unpredictable and sometime unstable. We take no resposibility for what you do or what happens when you do it.
READ THE FAQ's!
xda member Docent has kindly prepared an easy to follow faq tailored to the AmeriCanAndroid userbase.
You can find (and please DO find) his FAQ here
Optional automatic data/app backup and restore (bkup2sdext)
you do NOT have to partition your sdcard to run this build. All you need is a single fat32 partition, however extended features are available to those who sport a partitioned sd card
Check post 3 for user modifications such as sense theme and round battery icons.
Quote:
Changelog:
Quote:
Current Release:
03.08.12 - Update:
-cm code updates from jan 19 to march 08
The default lcd_density of ACA is currently 160 (due to market issues).
Edit the lcd_density= value to 240 in /system/build.prop to get standard sized icons and fonts)
-included a themed htc_ime generated from the online generator install apk from /sdcard/android/androidapps or /sdcard/backup/app. (activate through settings->keyboard after installed) ***the htc_ime keyboard is amazing btw the features are incredable test it even for a minute and youll understand***
Credit goes to gimpsta for this lovely keyboard. >> http://www.gimpsta.com/themer/
-*GSensor-Calibration tool: To use it
In terminal emulator type, su (return)
bma150_usr( lay phone flat on back and hit return )
exit(return), exit(return and close).
===ALL users read below=== its important that you read the section in
the installation and updating section before updating.
Previous Releases:
01.19.12 - Update:
-kernel updated to latest from warrenb
-cm code updates from jan 15 to jan 19
-fixed the magldr issues preventing boot
-new boot animation from evo1rs
01.11.15 - Update:
-kernel updated to latest from warrenb.
-cm code udpate from jan 11 to jan 15
-updated sqlite. should notice increased device performance
01.11.12 - Update:
-kernel updated to latest from warrenb and marc. 720 video recording should now work flawlessly.
-other updates in kernel (needs kernel changelog)
-cm code updates from jan 02 to jan 11
-fixed bk2sd (shutdown.d/* issues) for clk users
01.03.12 - Update:
-cm code updates from dec 20 to jan 03
-new .35 kernel from warren 0103.35
(moved older posts to archive)
Quote:
Installation & Updating:
Quote:
Installation & Updating Proceedure is the same!:
MAGLDR NAND:
Download the MAGLDR NAND build to your pc.
1. AmeriCanAndroid ######(magldr).7z -> unzip!
2. Run "ACASetup.exe" as an Administrator.
3. Follow the wizard. Enjoy!
CLK NAND:
New clk users should download the CLKstarterkit and complete steps 1 - 3
(existing clk users who are updating can skip to step 4)
1. Task29:
boot device hold down vol - until tri colored screen.
plug into pc. make sure screen says usb.
right click task29.exe (run as administrator) and follow instruct to wipe your device
oh yeah... we are wiping your device. lol
let this finish
2. Flash clk boot loader (ruusigned1905.nbh):
boot device hold down vol - until tri colored screen.
plug into pc. make sure screen says usb.
right click customruu.exe (run as administrator) and it will flash clk 1.4.0~
let that finish.
3. Flash clockwork mod (clkrecovery.img)
boot the device holding the back button to enter fastboot mode
(you may have to install the good usb drivers. I have included them in the zip)
Open a command line by pressing "windoze key+r" and typing "cmd", followed by enter
Navigate to folder, which contains the recovery image
Type "fastboot erase recovery" (<- not really necessary; just to make sure), followed by enter
Type "fastboot flash recovery cLK_recovery_3.0.2.5.img", followed by enter
Type "fastboot reboot" for rebooting your phone
Access recovery as described in cedesmiths thread (hold home key whilst powering on)
let that finish
4. Flash your new clk android rom (start here if you are updating from previous clk build)
boot device and hold home key whilst powering on
choose mounts and storage -> mount usb storage
make sure your device is plugged in
copy your update-signed.zip to the root of your sdcard
unplug and unmount on your screen.
backup to main clockwork mod menu and choose install zip from sdcard
choose zip from sdcard
choose update-signed.zip
choose YES
and
BAM INSTALLING!
(DONT WORRY ITS NOT FROZEN)
when its done. back to main menu
and choose reboot system now.
**First boot always takes a long time be patient, it will work, and future boots do not take as long.**
bkup2sdext users read below
- To enable backup of apps and data to your sd-ext partition edit /system/build.prop change
@ the bottom aca.bkup2sdext.enable to =1 (change back to 0 to disable)
*to enable restore of /data/data edit /system/etc/shutdown.d/02shutdown and add data after
for i in app app-private so you end up with for i in app app-private data;
save, then reboot.
-!! During day to day use; it is MOST important to SHUTDOWN and not pull batt,
as this is when your data gets backed up to the sd-ext partition.. !!
if you truly feel we are deserving, your donations are appreciated<--clicky!.
Coffee to keep us awake and working THANKYOU to those who have already done so. We'll keep working on making you a better build as best we can.
Quote:
Major thanks to:
Quote:
google - obviously... cyanogenmod team - for the great effort they put into their very high quality work. the ground floor to the roof and then some. Amazing Amazing. copenhagen - I saw we needed to thank you too Mr Canadian. haha. You rock. warrenb213 - its great working with you... its way better to have an team mate for these projects. and you've brought alot to this build. thankyou so much mdj - researching your builds have helped us tremendously in accomplishing this.. major thankyou. lithid - your guidance and straight forward tips have been most beneficial shub - for the great builds till u nixed them. mattfmartin, noellen, docent - xda bruthers from another mother. michyprima - you started copes love for nightlies.. its your fault! and he thanks you. diem - for the gps fix linus torvald - for starting something so amazing! tytung - for sharing your great work on the hd2's gps implementation ianscott888 - for the fantastic blender tutorials and 3d android rig set for our animation! pwhitrow(bootlogo), evo1rs(bootanimation), uzi2(support), docent14(support), playstation(support), krisdelisle(support), and the many other (sorry if i forgot u) users who have helped maintain the sanity. xda - for the forums.. the info.. and the users
to everyone else we missed. Thankyou
working for a community on a community project; to those who came before us, thankyou for everything you have done.. Thankyou.
12.20.11 - Update:
-cm code updates from dec 07 to dec 20
12.07.11 - Update:
-cm updates from nov 29 to dec 07
-evo1rs caught a smaller in init.d, have corrected it.
11.29.11 - Update:
-cm updates from nov 27 to nov 29
-NEW .35 kernel (lots of work by marc and warren have gone into this baby)
This retires our .32 kernel for the NAND build. :) .35 or greater moving forward.
11.27.11 - Update
-cm revision update to 7.2
-cm updates from nov 7 to nov 25th
11.07.11 - Update
-new super user app 3.0.6 and su binary 3.0.3
-new market 3.3.11
-added "fixed" vold until we can find the proper source code -thx evos!
-updated boot animation from evo1rs
-cm revision update to 7.1
-cyanogenmod updates from oct22 to nov 6th
-if you have superuser problems visit http://androidsu.com/superuser/
download both the 3.0.6 superuser app .zip and the 3.0.3 su bin .zip to your sdcard. boot into recovery and flash them both. super user is now fixed.
10.22.11 - Update
-cm updates from oct 17 to oct 22
-Evo1rs fixed the pixels in the boot animation thx buddy
-changed the lcd density to 160 to avoid the market "this device is not compatible" error message. YOU MAY HAVE TO clear data & defaults in settings appli market+reboot.
-have included a new .35 test kernel build for you.
10.16.11 - UPDATE:
-gingerbread revision update to 2.3.7
-cyanogenmod changes from 0828 to 1016!!
08.28.11 - UPDATE:
ACA Build updates:
-Added Tytungs GPS 2.1
===
Kernel Updates: r823
-Implemented RNDIS again(tried long ago), just Tytung's working
version. Kudos to tytung for the candy settings.
-Set config_hz back to 1000.
-Sourced from jdivic and mdebeljuh: Wakeup Lag Fix for AUO panels
===
Cyanogenmod Updates: (some may not apply to us - Updates from 081711 to 082811)
-SystemUI: Add 4g iconography
-telephony: add support for HSPA+
-Merge "telephony: add support for LTE and EHRPD" into gingerbread
-add missing prototype from OMAP4 FM header merge
-telephony: add support for LTE and EHRPD
-Merge "Log Wifi NativeCommand exceptions" into gingerbread
-Merge "Fix: Do not change music volume if screen off and no music playin...
-Merge "Fix exception in legacy USB support" into gingerbread
-Merge "SystemUI: Show mic-less headphone icon in status bar (1/2)" into ...
-Merge "Notification PowerWidget: Additional SoundMode: Vibrate/Silent" i...
-Merge "Revert "Change Finnish time format to use ':' instead of '.'"" in...
-Merge "frameworks/base: bluetooth: AVRCP 1.3 feature changes" into ginge...
-Fix: Do not change music volume if screen off and no music playing Comment
-Log Wifi NativeCommand exceptions
-Fix exception in legacy USB support
-SystemUI: Show mic-less headphone icon in status bar (1/2)
-Notification PowerWidget: Additional SoundMode: Vibrate/Silent
08.17.11 - UPDATE
ACAKernel r816 updates:
- kgsl updates:
*msm_kgsl: Move kgsl_sharedmem_init to module load
*kgsl_sharedmem_init/kgsl_sharedmem_close only need to be called once,
so move them to the the module load and close functions so they can be
available through the life of the module.
*msm_kgsl: Optimize TLB flushing
Only flush TLB when it is absolutely nessasary as opposed to
flushing it on every map and unmap
*msm: kgsl: Fix a potential subtraction overflow issue
*msm_kgsl: Reuse vmalloced memory buffers
Memory buffers that are vmalloced and can be freed are put
into a free list and reused later if an allocation of same size
is required.
- Tweaked the Audio levels a bit more.
- Added the HTC Auto White Balance Calibration to the leo.
- Modded compile script a tid bit
ACABuild Updates 081711:
- various aca build tweaks
- cyanogenmod updates from 0812 to 0817
08.12.11 - UPDATE:
-adjusted lcd auto backlight levels
-adjusted light sensor lux levels
-adjusted some notification led settings in the build
-enabled mms content disposition support (lets see if this fixes our mms issues)
-added some changes from https://github.com/CyanogenMod/andro...57adfc#diff-11
-cyanogenmod changes from Aug 7 to Aug 12
080711 - UPDATE
-massive cyanogen mod updates from aug 01 to aug 07
-updated gpslib to 2.0 (thx tytung)
080111 - UPDATE
lcd density (ie 167 to 240)
gps region (ie us to eu or ca)
data size (in MB)
-cyanogenmod source updates from 0729 to 0801
-gps cleanup fix applied in the build
-removed the davik2sdext was causing boot issues.
072911 - UPDATE
-new version number GRJ90 and Gingerbread 2.3.5
-cyanogenmod updates from Jul 22 to July 29
-you may need a new data img. (but as usual try ur existing first.. make a backup before you try)
-found and fixed an issue that caused "can only boot once" issue for some sd users
-updated to tytungs gps libs 1.9
-fixed VPN (tun module wasn't loading)
-added Jag's Fancy Schmancy Compass (Thanks Jag!)
bk2ext:
-disabled bk2sdext by default. it can be enabled in build.prop
-device only shuts down on first boot/upgrade if u have bk2sdext enabled
-added some checks against double mounting sdcard to sd-ext (no longer will happen)
-re-enabled backup of /data/-->data<-- in bk2sdext routine, but left restore out. (its good to have a backup of your data just in case)*
-still looking for the lib audio fix that is fixing this crash with skype.. (looking for the source code to fix it not a .so file)
^^however.. its probably something cyanogen will fix before i find it.
072211 - UPDATE
-new kernel from warrenb. ACAKernel r0719
-cyanogenmod updates from july 15 to july 22
-completely rebuilt from scratch. build now has permissions / ownership on OS files- set as per cm's specifications.
071511 - Update
-new kernel from warrenb. ACAKernel r0714
-added gsensor calibration tool* - thankyou for the tip evo1rs :)
-updated gps libraries**. thanks tytung and dan1j3l (http://forum.xda-developers.com/show....php?t=1100114)
-cyanogenmod updates from july 11 to july 15
070911 - Update
-rootfs now 7mb
-updated boot logo :) thanks to xda user pwhitrow
-swapped in a different default acdb file for louder sound
-cyanogenmod updates from july 05 to july 09
070511 - Update
-kernel now brought back up to date. with additional updates
-smaller rootfs
-cyanogen mod updates fomr june 23 to july 05
This is entry number one in a series of articles about tools for app developers, … more
XDA Developers was founded by developers, for developers. It is now a valuable resource for people who want to make the most of their mobile devices, from customizing the look and feel to adding new functionality. Are you a developer?
Introducing XDA:DevCon – A Conference For Developers By Developers
>
[08 Mar 2012] AmeriCanAndroid AOSP HD2 GB2.3.7 CM7.2 | bk2sdext [KERNEL:ACA0114-35]
Print
Email
[08 Mar 2012] AmeriCanAndroid AOSP HD2 GB2.3.7 CM7.2 | bk2sdext [KERNEL:ACA0114-35]
haha. You rock.
View Profile
View Forum Posts
Linear Mode
