Originally Posted by connexion2005

I concur. I've see the mod not work but only on a board with power supply issues in which when working correctly the board wouldn't supply power correctly nor detect a battery correctly. Do you know the history of the board?

Well, I the board as far as I know has no issues in that, I only happen to have flashed a wrong bootloader and in that process bricked my captivate so, I guess the board is as good as new.

I am not on VM ... I actually have a dual boot in place.

I would do get the Mod checked on and try again ... Will update you on whatever happens.

Originally Posted by AdamOutler

None. It only applies to the sequence of boot. When the power is off and the device is unplugged, it is off. when you plug in USB, it awaits a firmware upload. When you hold the power button, it takes 5 seconds instead of 1 to turn on because you have to get past the firmware upload part. If you hold the power button for 4 seconds and release while plugging in the power cable at the same time, it will go into battery charge mode.

This simply adds USB and UART booting to the startup sequence, allowing for upload of download mode, or any other bootloader durring the startup sequence.

Thanks. keep up the good work.

Ragarding quote below,

Originally Posted by kofijay

Well, I the board as far as I know has no issues in that, I only happen to have flashed a wrong bootloader and in that process bricked my captivate so, I guess the board is as good as new.

I am not on VM ... I actually have a dual boot in place.

I would do get the Mod checked on and try again ... Will update you on whatever happens.

Is it possible to add a connection/circuit analyzer to the ubrickable Mod program to check whether or not the mod was actually applied corrected (before clicking on the download mode button) since there is no way yet of knowing if the soldering was perfect or not.

I think this extension to the program will help those who probably tried their best to ensure a good soldering (while applying the unbrickable Mod) but yet were unable to successfully use the software to bring their bricked captivates back to life even while actually using Linux as their main OS or dual booted.

If the mod is done correctly. U will show sec soc smdk board in windows..linux type lsusb output should be samsung

Sent from my unbrickable cappy *bam*

Sorry if thus is off topic. But my buddy brought his motorola in today.its bricked. Do you think this mod will work on it?

See pic below

Sent from my unbrickable cappy *bam*

Originally Posted by bulletproof1013

Sorry if thus is off topic. But my buddy brought his motorola in today.its bricked. Do you think this mod will work on it?

See pic below

Sent from my unbrickable cappy *bam*

HAHHA... Does this guy hang out with Zach Morris?

Lol...hes got all the paperwork.charger.VHS user manual. MINT! Wonder if it would sell in the forums?

Sent from my unbrickable cappy *bam*

Originally Posted by adisa

Ragarding quote below,



Is it possible to add a connection/circuit analyzer to the ubrickable Mod program to check whether or not the mod was actually applied corrected (before clicking on the download mode button) since there is no way yet of knowing if the soldering was perfect or not.

I think this extension to the program will help those who probably tried their best to ensure a good soldering (while applying the unbrickable Mod) but yet were unable to successfully use the software to bring their bricked captivates back to life even while actually using Linux as their main OS or dual booted.

I was thinking about that last weekend. I will write it this weekend.

Originally Posted by kofijay

Well, I the board as far as I know has no issues in that, I only happen to have flashed a wrong bootloader and in that process bricked my captivate so, I guess the board is as good as new.

I am not on VM ... I actually have a dual boot in place.

I would do get the Mod checked on and try again ... Will update you on whatever happens.

Adam ... I'm here to say thank you a million times ... my 4 months dead captivate came to life today!
You and your software dude are just a rare kind!

I however realized something ... I don't know if it's just me or there is more to it:
I realized that, when I plug in my earphone and unplug it, the phone's earpiece stops working except loudspeaker.

Do you know anything about this Adam?

Thank you once again and well done with your achievement! You're a maestro!

Originally Posted by kofijay

Adam ... I'm here to say thank you a million times ... my 4 months dead captivate came to life today!
You and your software dude are just a rare kind!

I however realized something ... I don't know if it's just me or there is more to it:
I realized that, when I plug in my earphone and unplug it, the phone's earpiece stops working except loudspeaker.

Do you know anything about this Adam?

Thank you once again and well done with your achievement! You're a maestro!

That's normal operation. When you plug in a headset, you don't get earphone.

Thank you.