Originally Posted by Tones1971

Flash rom before kernel, as there is a kernel included in the rom.

the radio i believe can be flashed at any time and will not be changed when you flash a new rom or kernel.

The radio and recovery can be flashed at any time, your belief is right :P . It has nothing to do with what actually is on the phone (ROM, kernel etc.)
I saw many people confused about this (not only in this forum/topic).

Originally Posted by zerow

Guys first of all thank you each and everyone for their answer.

Secondly, i flashed only the big rom file (400mb aprroximately) prior to writing the older post. My evo runs ultra fine for the moment.I didn't flash the extra kernel or any radios, although on previous atemps i did flash the extra kernel too.

If i come accross the usual glitch of the wifi (slow or no signal at all), i'll flash the radio also mentioned above.

If i must do the process, how the priority must be ? Rom> kernel> radio ?
Must i do anything between flashing them ( wiping anyting) ?

My radio for the time being is: 10.59.9020.00U_10.15.9020.06_M

For best reception, I suggest you flash 10.53.9020.00_10.13.9020.08_2...

---------- Post added at 06:05 PM ---------- Previous post was at 06:03 PM ----------

OC`ed CPU to 1.4 GHz. Set the governor to Performance. Didn't undervolt (restored the default values). That CRT SCREEN OFF animations lags like hell. Also, the unlocking animation lags. It works perfectly fine if I set the governor to Interactive (which is odd). Kernel V5.3.3, obviously.
(just in case this issue has not been addressed yet, Lee )

i have an error while installing

says making ext4 and about 15 seconds later i get installation aborted error/0

U should flash whatever ie the latest stuff...
What is that number even supposed to be????

Sent from my PG86100 using Xparent Blue Tapatalk

Originally Posted by 00mpollard

i have an error while installing

says making ext4 and about 15 seconds later i get installation aborted error/0

Do you have S-OFF or S-ON? What recovery are you using?

Download the ROM again and try to flash it after you superwipe (download superwipe HERE).

---------- Post added at 06:21 PM ---------- Previous post was at 06:19 PM ----------

Originally Posted by paallday

U should flash whatever ie the latest stuff...
What is that number even supposed to be????

Sent from my PG86100 using Xparent Blue Tapatalk

You're talking about the radio?!

Not sure what the numbers really represent, but I know this : the first RADIO is 100% compatible (so to say) with LeeDrOiD.

Originally Posted by 00mpollard

i have an error while installing

says making ext4 and about 15 seconds later i get installation aborted error/0

I had that with my first install under CW 5.8.0.2, at the very end of the installation process, but after the reboot all was fine

One quick question:
So, i downloaded radio 10.53 but it's an .img file, so how i flash it ?
I'm going to reflash my phone: Rom> Kernel> Radio
Any wiping or anything prior to flashing any of the above ?

Well, that was 2 questions. Thank you very much !

Originally Posted by TomLeeDesire

I had that with my first install under CW 5.8.0.2, at the very end of the installation process, but after the reboot all was fine

Im running the same version of cwm and i am s-off'd

The touch recovery seems a bit buggy to me

Originally Posted by Icefeldt

What?

Bluetooth works excellent with your ROM @ my Flyer.

Using it to stream Music to my Car audio system.
Or to read car data via OBD Bluetooth Interface!

No problems with BT on flyer so far!

Need to get calls working over Bluetooth on the flyer

Sent from my LeeDrOiD loaded s-off HTC EVO 3D

FYI guys.. I increased the gpu clock very early on in dev stages with no negative effect, HTC are rather consecutive when it comes to voltages and gpu clock speeds, we have simply brought things in line with what they are designed to do, the gpu OC code I mentioned simply improves gpu scaling and is a little more conservative at lower CPU speeds

Sent from my LeeDrOiD loaded s-off HTC EVO 3D

Originally Posted by zerow

One quick question:
So, i downloaded radio 10.53 but it's an .img file, so how i flash it ?
I'm going to reflash my phone: Rom> Kernel> Radio
Any wiping or anything prior to flashing any of the above ?

Well, that was 2 questions. Thank you very much !

You place the .img into your AndroidSDK's /tools folder. Then use cmd to "fastboot flash radio radio.img" (while you're in Fastboot, and your phone is connected).

There's no wipe required for radio flash. Just do the above. If you don't understand, see this.

--

Flash superwipe (link is in another post I previously made, I'm not going to upload this 1000 times a day!), reboot recovery, flash ROM, wipe cache & dalvik, flash kernel, wipe cache & dalvik, reboot phone.

---------- Post added at 07:24 PM ---------- Previous post was at 07:23 PM ----------

Originally Posted by LeeDroid

FYI guys.. I increased the gpu clock very early on in dev stages with no negative effect, HTC are rather consecutive when it comes to voltages and gpu clock speeds, we have simply brought things in line with what they are designed to do, the gpu OC code I mentioned simply improves gpu scaling and is a little more conservative at lower CPU speeds

Sent from my LeeDrOiD loaded s-off HTC EVO 3D

OC`ed CPU to 1.4 GHz. Set the governor to Performance. Didn't undervolt (restored the default values). That CRT SCREEN OFF animations lags like hell. Also, the unlocking animation lags. It works perfectly fine if I set the governor to Interactive (which is odd). Kernel V5.3.3, obviously.
(just in case this issue has not been addressed yet, Lee )

Not sure if that's GPU or CPU related... but it's odd, anyways.
If it is GPU related, I don't see how the CPU governor could have affected it. If it's CPU related, I don't see how 1.4 GHz isn't enough for the CRT animation to be smooth...