FORUMS

The OnePlus 2 & The Year of Smartphone Compromises

We are very close to entering the last third of 2015, and we have now seen many of … more

OnePlus 2 Teardown, Major Android Vulnerability – XDA TV

The OnePlus 2 has been officially released. That and much more news is … more

What Do You Think About Fingerprint Scanners?

More and more phones are featuring fingerprint scanners, and with many promising … more

What’s Next for Samsung and Its Flagships?

If we were to say that the Galaxy S6 was a leap of faith made by Samsung, we … more

[Dev] Bypass "bootloader" [PROPER METHOD]

159 posts
Thanks Meter: 835
 
By the_laser, Senior Member on 8th September 2011, 01:03 AM
Post Reply Subscribe to Thread Email Thread
11th November 2011, 11:09 AM |#221  
Senior Member
Flag Birtley, Tyne and Wear
Thanks Meter: 54
 
Donate to Me
More
Quote:
Originally Posted by gregbradley

Can you see the Sony Ericsson logo when you boot up...if not them it is unlocked

Sent from my X10i using xda premium

That's not strictly true. You need to have flashed a custom kernel for unlocked bootloaders before the Sony Ericsson text dissapears.
 
 
11th November 2011, 05:43 PM |#222  
jacko_oafc's Avatar
Member
Thanks Meter: 1
 
More
Quote:
Originally Posted by mpgrimes

aparently this multi unlock client is supposed to be getting an update that will allow it to unlock the bootloader as well, until then you have two choices, 1) wait, or 2) pay again and have it reunlocked with setool2 and then use the method shown in the forums here, which i know works, cause i had my bootloader unocked before i used multi unlock client



i would consider paying again, if i knew someone that had access to it and could do it for/with me

Ok cheers. do you know roughly how much it is to unlock via SETools
Cheers
12th November 2011, 04:24 PM |#223  
Account currently disabled
Flag Wiltshire/UK
Thanks Meter: 82
 
More
Depends, to buy the box your starting at 150.00 GBP + activations and credits
14th November 2011, 12:58 AM |#224  
Member
Thanks Meter: 12
 
More
Hey, I recently unlocked my bootloader and now, my x10 won't read my T-Mobile US Sim Card. How do I go about relocking my bootloader? I desperately need to get this fixed or else I'm out one smartphone. Can anyone here help me? I tried reflashing Stock Android 2.1 and the phone still won't read my T-Mobile Sim Card. Does anyone here have any suggestions on what I can do? Any help on the subject would be much appreciated.
14th November 2011, 01:10 AM |#225  
gm007's Avatar
Senior Member
Thanks Meter: 3,427
 
More
Quote:
Originally Posted by x016x

Hey, I recently unlocked my bootloader and now, my x10 won't read my T-Mobile US Sim Card. How do I go about relocking my bootloader? I desperately need to get this fixed or else I'm out one smartphone. Can anyone here help me? I tried reflashing Stock Android 2.1 and the phone still won't read my T-Mobile Sim Card. Does anyone here have any suggestions on what I can do? Any help on the subject would be much appreciated.

http://forum.xda-developers.com/show....php?t=1259617
15th November 2011, 09:15 AM |#226  
hoangluongvinh's Avatar
Senior Member
Thanks Meter: 124
 
More
My problem:
Quote:

Welcome to S1 identify tool

TO CONNECT NEXT PHONES
X10 Xperia,E10 Xperia Mini,E15 Xperia X8,U20 Xperia Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...

PLEASE ATTACH TURNED OFF PHONE NOW

RUNNING S1_EROM VER "r8A033"
SOFTWARE AID: 0001
SIMLOCK STATE: "TAMPERED"
LOADER AID: 0001
hash not supported [00000000000000000000000000000000]
Elapsed:14 secs.

is it possible to unlock it with SETOOL somehow?
4th January 2012, 01:20 AM |#227  
Member
Thanks Meter: 2
 
More
Code:
process requires standard 2.x android firmware.
Press any key to continue . . .
Getting ROOT rights.
* daemon not running. starting it now *
* daemon started successfully *
failed to copy 'bootTools\rageagainstthecage' to '/data/local/tmp/expl': Permission denied
Unable to chmod /data/local/tmp/expl: No such file or directory
/system/bin/sh: /data/local/tmp/expl: No such file or directory
Waiting ...
Removing NAND MPU restrictions via SEMC backdoor. Permanent. Require ROOT rights
.
failed to copy 'bootTools\fixPart' to '/data/local/tmp/fixPart': Permission denied
Unable to chmod /data/local/tmp/fixPart: No such file or directory
/system/bin/sh: /data/local/tmp/fixPart: No such file or directory
reboot: Operation not permitted
Waiting ...
Getting ROOT rights.
/system/bin/sh: /data/local/tmp/expl: No such file or directory
Waiting ...
Writing patched semcboot. Two step process
First, we need get access to semcboot area
failed to copy 'bootTools\mapper_2.6.29.ko' to '/data/local/tmp/mapper_2.6.29.ko': Permission denied
Unable to chmod /data/local/tmp/mapper_2.6.29.ko: No such file or directory
insmod: can't open '/data/local/tmp/mapper_2.6.29.ko'
Second, we need to write semcboot ;)
failed to copy 'qsd8250bootwrite_semcSL' to '/data/local/tmp/qsd8250bootwrite_se
mcSL': Permission denied
Unable to chmod /data/local/tmp/qsd8250bootwrite_semcSL: No such file or directory
/system/bin/sh: /data/local/tmp/qsd8250bootwrite_semcSL: No such file or directory
Phone is rooted and using EWJet rom v4.1. I'm using the azuzu downgrade-upgrade method. I worry that if I rush anything now I may brick my phone. Any detailed solution for the problem?
Last edited by totalz; 4th January 2012 at 02:07 AM.
4th January 2012, 12:36 PM |#228  
Anenth's Avatar
Junior Member
Flag Calicut
Thanks Meter: 0
 
More
help
process requires standard 2.x android firmware.
Press any key to continue . . .
Getting ROOT rights.
2994 KB/s (585731 bytes in 0.191s)
Failed to set prot mask (Inappropriate ioctl for device)
Waiting ...
Removing NAND MPU restrictions via SEMC backdoor. Permanent. Require ROOT rights
.
334 KB/s (3087 bytes in 0.009s)

Unable to open router port: Permission denied
Diag_LSM: Diag_LSM_Init: Failed to open handle to diag driver, error = 13 ERR :
MSG Open handle failed, unable to open program 30eeeeee ver 10001 NOT FOUND
:FILE vendor/qcom-proprietary-qsd8k/oncrpc/oncrpc/oncrpc_cb.c:LINE 231:ARG1 82
0965102:ARG2 65537:ARG3 0:
ERR :MSG Couldn't setup RPC call :FILE vendor/qcom-proprietary-qsd8k/oncrpc/on
crpc/oncrpc_cb.c:LINE 276:ARG1 0:ARG2 0:ARG3 0:
Error: Failed to lookup client for 0x30EEEEEE 0x00010001
FATAL :MSG Failed to lookup RPC client. prog = 820965102, vers = 65537, tout =
0 :FILE vendor/semc/system/core/miscta/libmiscta/rpc_service.c:LINE 65:ARG1 820
965102:ARG2 65537:ARG3 0:
reboot: Operation not permitted
Waiting ...
Getting ROOT rights.
Failed to set prot mask (Inappropriate ioctl for device)
Waiting ...
Writing patched semcboot. Two step process
First, we need get access to semcboot area
715 KB/s (8064 bytes in 0.011s)
insmod: init_module '/data/local/tmp/mapper_2.6.29.ko' failed (Operation not per
mitted)
Second, we need to write semcboot
2889 KB/s (588228 bytes in 0.198s)
can't find userdate partition
Press any key to continue . . .




What should i do?
22nd January 2012, 08:12 PM |#229  
Junior Member
Thanks Meter: 0
 
More
Is there a native linux version of s1tool available?
24th January 2012, 03:48 AM |#230  
aR_ChRiS's Avatar
Senior Member
Flag Hong Kong
Thanks Meter: 261
 
More
Guys you can always use the latest flashtool to unlock your bootloaders (there are both windows and linux versions).
27th February 2012, 07:04 PM |#231  
flumps's Avatar
Senior Member
Thanks Meter: 22
 
More
grrrr. ive been trying to find a uncorrupted version of qsd8250.7z but everywhere ive looked they are ALL corrupted! can someone pls rezip the contents and reupload them pls!
Last edited by flumps; 27th February 2012 at 07:08 PM.

Read More
Post Reply Subscribe to Thread

Tags
bl unlock, bootloader unlocked, go devs!
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes