[Q] HELP ASAP!!! Software Update Failed and won't read SD Card:(((:((

---

Before I succesfully flashed Custom Windows Rom and had Android in my SD card root folder. I also flashed HSPL and MAGLDR113 and CWM Recovery v3.2 trying to install Nexus. But I couldn't copy the Nexus...rar file cause I didn't locate the file on the computer.
So I decided to flash back to original ROM for my HD2.
I copied LEOIMG.nbh to SD card but then it said "File cannot be located" so basically it partially copied and when I rebooted my phone and it showed white screen with a message of an update. I cancelled update but nothing happened it just came back to the same message and tried to update software but it failed.
So now I stuck in tri-color bootloader with a message:

SS-B3
SPL-2.10.0000 8G XE
MicroP(LED) 0x05
MicroP(Touch) 0x40

I doesn't even read the card any more so I CANT DO ANYTHING!!
What's weird too when I checked SPL version it was 2.08 but now it's 2.10.
WTF is going on? Can anybody tell me? Is it fixable at all?(((

Ok this is what I would do, I would back up my SD card on my computer. Then I would do a full reformat of my SD card with Fat 32. then re download the Windows Mobile stock ROM for your HD2 and copy it to the re formatted SD card. I would only have the ROM on my SD card and then put it in my HD2 and boot it up into bootloader.

The ROM you tried to flash is what changed your SPL to 2.10.0000. Cause the SPL flashes before the ROM does. So that means it was something wrong with the ROM and it could not flash it.

Yeeeeaaaaayyyy!

---

I fixed it, man!
What I've missed is to launch bootloader pressing down button, then it showed USB mode at the bottom, after that I could flash stock ROM to my HD2!!!
Now it's all good.
The only thing I wonder now: what HSPL should I flash?
Is HSPL 2.08 still ok?

[QUOTE=zandulya;17474679]I fixed it, man!
What I've missed is to launch bootloader pressing down button, then it showed USB mode at the bottom, after that I could flash stock ROM to my HD2!!!
Now it's all good.
The only thing I wonder now: what HSPL should I flash?
Is HSPL 2.08 still ok?[/QUOTE

You must have flashed a official update for your HD2 so I would say yes cause you are still on official stock software. But I still suggest you do a little double checking to see that the ROM you have is a ROm that was released for your specific HD2.

Thanks!!

---

Yep, I don't remember what link I used but I put in my IMEI so it referred me to a particular rom!
Back on track now testing some new ROMs.
Do u have any suggestions for Android ROMs?

Hello to you all,

I have some sort of the same problem. First my original windows 6.5 did not start up any more. That made me look on the internet to see what options there where to fix it. After finding a lot of options I choosed to install android on my system. That worked for a long time but unfortunately it also hung itself up. As a reaction I tried a hard reset and it looks like that was fatal for my phone because I cannot install anything anymore. The only thing I can come in is bootloader menu but when I want to install anything, it stops before finishing.
Is there someone who can help me with this problem? By forehand thanks!

Kind regards,
Jaimy