Originally Posted by eybee1970

running v1.7beta2 with 100 mhz/875mV and 200 mhz/850mV without any problem
default governor smartassv2, profile for screen off 100-200 with governor on demand - no wakelocks at all til now

Did you have wakelocks before 1.7?

Sent from my GT-I9100 using XDA App

Originally Posted by gokhanmoral

Did you have wakelocks before 1.7?

Sent from my GT-I9100 using XDA App

yes, on one of previous - don't remember version, cause you update too fast

Thank you gokhanmoral for your great kernel. I am using 1.7b2 and 100 mhz set at 800mv with no problems during deep sleep. Is it possible to add another step, something like 1500 mhz? Because my sgsII and probably many others are not stable at 1600 mhz but have no problems at 1500 mhz.

Originally Posted by gokhanmoral

Guys I received very positive feedbacks especially about having no wake up problems with stock values.
I have to release it until sunday then Ill be gone.
Please test 100mhz with stock voltages. It will save more battery.than 200mhz@800mv. I want to make sure it runs well for everybody or I will remove it in the released version to leave a stable kernel behind.

Sent from my GT-I9100 using XDA App

Running 1.7beta1 with lowererd voltages on 100 and 200mhz and no wakeup issues so far. I think the 1.7 version should be safe as an release before you take a well earned brake! You have done something in a week other couldn't do in month!

Just one request though: could you append a litte more info (uses screen-on-off profiles, faster/slower up/down-scaling, etc) for the different governors you added to the first post? This would help do determine which scheduler suits ones needs.

Config:

--[Kernel]--
2.6.35.7-Siyah-v1.7beta1+
--[Voltages]--
1600mhz: 1425 mV
1400mhz: 1275 mV
1200mhz: 1175 mV
1000mhz: 1075 mV
800mhz: 975 mV
500mhz: 875 mV
200mhz: 850 mV
100mhz: 850 mV
--[Max Freqency]--
800000
--[Min Freqency]--
100000
--[Active Governor]--
smartassV2
--[GPU Voltages]--
Step1: 800000
Step2: 800000
--[GPU Freqencies]--
Step0: 100
Step1: 267

great kernel :)

but how handle the charging feautre?? cant find anyrhing :(

Originally Posted by kwerdenker

Running 1.7beta1 with lowererd voltages on 100 and 200mhz and no wakeup issues so far. I think the 1.7 version should be safe as an release before you take a well earned brake! You have done something in a week other couldn't do in month!

Just one request though: could you append a litte more info (uses screen-on-off profiles, faster/slower up/down-scaling, etc) for the different governors you added to the first post? This would help do determine which scheduler suits ones needs.

Config:

--[Kernel]--
2.6.35.7-Siyah-v1.7beta1+
--[Voltages]--
1600mhz: 1425 mV
1400mhz: 1275 mV
1200mhz: 1175 mV
1000mhz: 1075 mV
800mhz: 975 mV
500mhz: 875 mV
200mhz: 850 mV
100mhz: 850 mV
--[Max Freqency]--
800000
--[Min Freqency]--
100000
--[Active Governor]--
smartassV2
--[GPU Voltages]--
Step1: 800000
Step2: 800000
--[GPU Freqencies]--
Step0: 100
Step1: 267

+1 on that

Please, tell us how to change charging speed.


Edit: have found the values in sys/devices/virtual/misc/charge_current

Originally Posted by ehmi

Please, tell us how to change charging speed.


Edit: have found the values in sys/devices/virtual/misc/charge_current

Max limits are 1200 1000 800
Be careful it may cause problems especially with the camera. I am now using 1000 1000 450. Dont increase the third value if you are not sure the usb port has a current limiter.

Sent from my GT-I9100 using XDA App

Originally Posted by gokhanmoral

but you are now using v1.7, right?
not testing v1.6 with 100MHz?

I've tested. With bilgiç2 . Phone restarts allways after awake

Originally Posted by gokhanmoral

yes, exactly. my primary goal is to have more battery life.

I've just undervolted 100 MHZ to 875 and do not change something more. Battery life its good but Quadrant benchmark is about 3000 ... How do u think if there is combination of values ( without use of 1200+ frequency ) that both gives best battery and benchmark ( speed ) ?

And some question. How can i improove charging time ( do voltages on some frequences affect on this ) ? I find that charging more time

Originally Posted by TheRealWells

Try flashing cfroot ki4, reboot, flash beta2 using cwm app, uninstall both voltage control and setcpu.. Just guessing :/ hope it helps

Sent from my GT-I9100 using XDA App

This worked for me ^^