HTC 7 PRO there is no spl

---

Hi, i have htc 7 pro ( t7576) phone works fine (mango 7720.68) but in bootloader i have only pc92100 ss-bc (4k) and pc dont see handset, but when phone is fully turn on works great. Cannot upgrade/downgrade when phone is bootloader. Any way to fix it?

http://imageshack.us/photo/my-images...110926001.jpg/

Sorry for my english.

br newchief

In settings->about i see :

http://imageshack.us/photo/my-images...110926005.jpg/

I think that your phone have locked bootloader mode. You installed shipROM ?

This FW was installed on phone : RUU_Gold_S_HTC_Europe_3.02.401.01_Radio_5.69.09.29 a_22.50.50.21_Signed_GOLD_RELEASE

Phone was SPL , non h or r spl

Check PM
You don't read this:

2.after flash rom CAN NOT flash RSPL/HSPL again

in first post that topic: http://forum.xda-developers.com/show...43&postcount=1
Now you must wait for fix that bug.

Originally Posted by Budniu

Check PM
You don't read this:

in first post that topic: http://forum.xda-developers.com/show...43&postcount=1
Now you must wait for fix that bug.

Thank you- all clear.

BR newchief

Good day!
Sorry for my english.
I have the same problems.Who can help me.Where I can .CAB file find with new bootloader,because my old bootloader is dead.
I now have soft:
OS version: 7.10.7720
Firmware revision number: 2250.21.30201.401
Hardware revision number: 0002
Radio software version: 5.69.09.29a_22.50.50.214
Radio hardware version: A.102.0.D4
Bootloader version: 3.2.2250.0
Chip SOC version: 2.2.5.0
Thanks!

I fix my half bricked HTC 7 Pro with WP7-Update-Cab-Sender and following update:

http://forum.xda-developers.com/show...8&postcount=79

After this update i will see full SPL screen in my phone

Hopefylly this info help you...

- Kari

Originally Posted by KooTee

I fix my half bricked HTC 7 Pro with WP7-Update-Cab-Sender and following update:

http://forum.xda-developers.com/show...8&postcount=79

After this update i will see full SPL screen in my phone

Hopefylly this info help you...

- Kari

Hi Kari.

I am happy you have success with this update file.

Can you (and anybody with unbrick success), please, write here or to my PM next informations:
1. What is mechanism of your halbrick?
2. What ROM, SPL, unlock state is present on your phone before halfbrick and also the same before update applicating?
3. How you have sent cab file to phone (update cab sender or any coommand line with UpdateWP, full cab or only MODEM subcab)?
4. Have you any certificates problem?
5. Send you it to Mango or after any backup restore?

I am working on full unbrick solution long time. When I will have all informations, I will write Unbrick Manual to thread http://forum.xda-developers.com/show...0#post19571430

When somebody have after HTC update "small" halfbrick (more lines on tricolore, but without Serial/USB line), GoldCard method success is confirmed

Originally Posted by KooTee

I fix my half bricked HTC 7 Pro with WP7-Update-Cab-Sender and following update:

http://forum.xda-developers.com/show...8&postcount=79
After this update i will see full SPL screen in my phone
Hopefylly this info help you...

- Kari

Thank you! Bootloader was exchanged but no usb / serial!
I found output here - http://4pda.ru/forum/index.php?showtopic=284123

Now I have 100% boot loader!

Originally Posted by widdermann

Thank you! Bootloader was exchanged but no usb / serial!
I found output here - http://4pda.ru/forum/index.php?showtopic=284123

Now I have 100% boot loader!

Yes, it is similar solution as http://forum.xda-developers.com/show...4#post19607654 , only in Azbuka. You can use simple feature USB A/F-A/F to working with GoldCard without bastling, with cables, which everybody have at home - see picture here http://htc7pro.howto.cz/ , external power (2,5 harddisc cable) is better to prevent flashing crash. MicroSD Nokia is not necessary, may be used any card, but you must code goldcard image (see XDA WP7 GoldCard threads), if your region is not equal to nbh file.