Error code 80180048 when updating to mango

---

I have an un-branded Samsung Omnia 7 (Deutsche Telekom I believe). I did the force update for mango and was able to update to 7403 just fine. However, at the last step 2 of 2 of updating to 7720 it gave me the error code 80180048. I do not have a walshed phone because I tried using the walshed fix and the program said my phone wasn't walshed. Any one having this issue or have fix for this? Thanks.

All Languages

---

I was having a problem with failled Mango update and I discovered I used the Walsh tool wrong. I only selected the language that was "checked" in my keyboard settings and not ALL languages that were available on my phone. Once I selected all languages, the update went flawlessly.

---------- Post added at 08:43 PM ---------- Previous post was at 08:25 PM ----------

Did you also install the Windows Phone Support Tool? It may be needed for the Walsh Tool.

I have samsung focus (from Rogers Canada) and am facing exactly the same problem, I have reset my phone a couple of times but still receiving the same error, am not sure what to do now, can someone suggest following steps? I don't have walshed phone and walsh tool gave me missing clsid exception.

Originally Posted by frazrasheed

I have samsung focus (from Rogers Canada) and am facing exactly the same problem, I have reset my phone a couple of times but still receiving the same error, am not sure what to do now, can someone suggest following steps? I don't have walshed phone and walsh tool gave me missing clsid exception.

Samsung Focus has two hardware revisions.
You will not be able to get passed the last steps to update to Mango if you have rev. 1.4

rev 1.3(Micron): Windows 7.5 update will be available through Zune on 9/27.

rev 1.4(LSI) : Update has not entered the AT&T SPE lab yet; however, Samsung is targeting for 10/17 lab entry and 10/31 TA"

you can check which revision you have by pulling out the battery. there should be a revision number on on a white sticker on the device.

I have checked the focus revision number on my phone and it is 1.3, I found that one may use windows phone support tool to solve the issue, but it always gave me the 'the device not in connect to pc mode' error while I am pretty sure the device is infact that mode, so somehow it doesn't see that. I am still confused what to do now?

Originally Posted by frazrasheed

I have checked the focus revision number on my phone and it is 1.3, I found that one may use windows phone support tool to solve the issue, but it always gave me the 'the device not in connect to pc mode' error while I am pretty sure the device is infact that mode, so somehow it doesn't see that. I am still confused what to do now?

sounds like a USB driver issue.

open Device Manager
open Zune
plug in the phone into the USB
In the device manager you should see Windows Phone USB Device at the very bottom come in.
Double click and double click Windows Phone USB. Got to Driver tab and make sure it reads Deiver Version 4.8.2345.0

if you have something older, uninstall the driver, unplug the phone, then plug it back in and hopefully it will pick up the new one.

I have exactly the same problem as Starsyde.

Forced update managed to get me through to 7403 and then on step 2 of 2 I get error 80180048. Tried at least 6 or 7 times and always get the same result.

My phone is also an Omnia 7 (bought it unlocked but has the Orange UK logo and apps preloaded).

It's not Walshed (I didn't even have an idea what that even meant until a couple hours ago but still tried that tool, just in case - it says "Good news, your phone isn't Walshed!") and the Windows Phone Support Tool says the phone's not in a "Connect to PC state", even though it is.

To sum up: nothing works.

Oh, almost forgot: I then saw the post about the USB drivers, it's version is 4.8.2148.0 but it says it's the last version so it won't update, and when I unsinstalled it, it automatically installed the same version.

Originally Posted by mrrtt

I have exactly the same problem as Starsyde.

Forced update managed to get me through to 7403 and then on step 2 of 2 I get error 80180048. Tried at least 6 or 7 times and always get the same result.

My phone is also an Omnia 7 (bought it unlocked but has the Orange UK logo and apps preloaded).

It's not Walshed (I didn't even have an idea what that even meant until a couple hours ago but still tried that tool, just in case - it says "Good news, your phone isn't Walshed!") and the Windows Phone Support Tool says the phone's not in a "Connect to PC state", even though it is.

To sum up: nothing works.

Oh, almost forgot: I then saw the post about the USB drivers, it's version is 4.8.2148.0 but it says it's the last version so it won't update, and when I unsinstalled it, it automatically installed the same version.

odd, the latest drivers are 4.8.2345.0 and these were installed a week before Mango was released to prepare the phones for Mango. Not sure why it would give you an older USB driver....

I updated the USB driver but the problem stays the same, not sure what else could be done

Originally Posted by derausgewanderte

sounds like a USB driver issue.

open Device Manager
open Zune
plug in the phone into the USB
In the device manager you should see Windows Phone USB Device at the very bottom come in.
Double click and double click Windows Phone USB. Got to Driver tab and make sure it reads Deiver Version 4.8.2345.0

if you have something older, uninstall the driver, unplug the phone, then plug it back in and hopefully it will pick up the new one.

I'm been have the same problem with a samsung focus v1.3, i've tried everthing i could find, but nothing worked. I hope someone has an answer to what causing this.

I've reflashed the phone with both the rogers and at&t roms(many times) but can only get to 7403.

Also i have tried 4 different computers, one was ever XP.