With Bootloaders - Link 1 / Link 2 [With CWM Injected Kernel from Boog] Heimdall One-Click, With Bootloaders - Link to thread - by AdamOutler (Stand alone executable file) Without Bootloaders - Link to thread - by 4-2ndtwin [With CWM Injected Kernel from Boog] Heimdall One-Click, Without Bootloaders - Link to thread - by Kernel with CWM - Link to thread - by Boog
With Bootloaders - Link 1 / Link 2 Without Bootloaders - Link 1 / Link 2 Stock Kernel - Link 1 Kernel with CWM - Not released yet!
-Perform a factory reset on your phone. (Optional, recommended)
-Download any OneClickOdin package to your desktop.
-Be sure you have the Captivate drivers installed on your computer.
-Right click and Run as admistrator the Odin.
-Remove your sim card and external sdcard from you phone.
-Put your phone into download mode. (Press and hold both volume buttons and insert USB cable into phone)
-Wait for Odin to recognize your device. Yellow com port will light up.
-Click the big Start Button.
-Sit back and watch. This should only take between 2 or 3 minutes to complete.
-When the process is finished and your phone begins to reboot and you see the at&t screen you may go ahead and unplug the micro usb from your phone.
Once you're on AT&T GB Bootloaders, I would advice you to use bootloader free package always in future. So far AT&T GB bootloaders have been backward compatible with all I897 (even I9000) Froyo/Eclairs ROMs. I have used I9000 based ROMs with AT&T GB BLs. Someone in CM7 thread claimed to use AT&T GB bootloaders with CM7 without any problem.
PS: Odin3 v1.85 (to flash kernels) is attached to this post, in case you don't have one.
Thanks to designgears, 4-2ndtwin, Cezar, Boog, Przekret, AdamOutler and many more developers..
PS: More than half of the modems listed here, I have collected from here and there, don't even remember from where. However I remember there was one website where I found most of them. Rest are simply packed by me using same zip script from others. I am just putting up all Stock Captivate stuff at one place.
EDIT: Found the original thread by Oxicottin. Most the modems here are done by him. Check out his website for location wise data for best modems. Check this thread for a get around on RAT selection restrictions on i897 modems.
Also, check this thread for more I9000 based modems and modem dance. (I9000 modems requires I9000 based ROM and reoriented kernels.)
"Leaked" Stock I897UCKK4 Android 2.3.5 One Clicks *Heimdall and Odin*
**This is the "LEAKED" (NOT Official) Stock I897UCKK4 Firmware**... BUTThe "leaked" I897UCKK4 and the "Official" I897UCKK4 have already been confirmed to be one and the same. KK4 is KK4. Credit to Time_Zone and his post here (and related posts)... http://forum.xda-developers.com/show...&postcount=145
And I personally downloaded his capture of the mini kies update and compared it with the "leaked" KK4 and can confirm 100% with Time_Zone that they are identical.
Use these One Clicks to Flash to Stock I897UCKK4 Gingerbread Firmware from the Android platforms (Eclair, Froyo, Gingerbread), including the (AOSP/MTD) Cyanogen Mod, and MIUI Roms and also ICS and Jellybean Roms. Of course i897 Gingerbread Bootloaders must be installed in order for you to run an i897 Gingerbread Firmware.
Odin will work on Windows (XP, Vista, 7 etc.) - Heimdall will work on Windows (XP, Vista, 7 etc.), Linux or Mac OS-X.
Here are four One Click executables that I put together. Each is packaged in a zip file along with a Read Me file that contains Info and Instructions.
The zip file is used just to include the Read Me and to make for a smaller download file size. Once downloaded to your computer, just extract the One Click and Read Me out of the zip and follow the info and instructions contained in the read me file.
The title of these really says it all, but the Read Me files will give a lot more info.
Again, these are Complete Stock I897UCKK4 Gingerbread Firmwares.
Hope many find these useful.
__________________________________________________ ________________________ Odin One Clicks
**Once u have the i897 Gingerbread Bootloaders, it is not necessary to flash bootloaders again. The i897 Gingerbread Bootloaders are backwards compatible, therefore you can flash Eclair, Froyo, Gingerbread, CyanogenMod, and MIUI Firmware/Roms without the bootloaders included, per the proper install instructions.**
In the last few months, we’ve talked about quite a few Sony Honami-related projects. … more
27 Aug 2014
By Tomek Kondrat
XDA Developers was founded by developers, for developers. It is now a valuable resource for people who want to make the most of their mobile devices, from customizing the look and feel to adding new functionality. Are you a developer?