[ROM][STOCK][europe]p7510xwKH5

nandihno · 12:56 PM

[ROM][STOCK][europe]p7510xwKH5

The link is
http://hotfile.com/dl/131660662/a50e...XEKH2.rar.html
Pasword to unzip is sampro.pl

Have to congratulate the guys from sampro.pl for getting this one.

Before you proceed
Am not responsible if your tab is "bricked" or damage...here you will have to play with Odin so a certain experience with odin is recommended
Note too.you will be required to wipe everything a la Odin (i.e. it will erase everything that is in your SD card as well so YOU MUST BACKUP any important info on to your PC or cloud!)

This is its build.props

Code:

# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=HMJ37
ro.build.display.id=HMJ37
ro.build.version.incremental=XWKH5
ro.build.version.sdk=12
ro.build.version.codename=REL
ro.build.version.release=3.1
ro.build.date=Thu Aug 18 18:29:39 KST 2011
ro.build.date.utc=1313659779
ro.build.type=user
ro.build.user=root
ro.build.host=DELL136
ro.build.tags=release-keys
ro.product.model=GT-P7510
ro.product.brand=samsung
ro.product.name=GT-P7510
ro.product.device=GT-P7510
ro.product.board=GT-P7510
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=tegra
# ro.build.product is obsolete; use ro.product.device
ro.build.product=GT-P7510
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=GT-P7510-user 3.1 HMJ37 XWKH5 release-keys
ro.build.fingerprint=samsung/GT-P7510/GT-P7510:3.1/HMJ37/XWKH5:user/release-keys
ro.build.characteristics=tablet,nosdcard
# Samsung Specific Properties
ro.build.PDA=P7510XWKH5
ro.build.hidden_ver=P7510XWKH5
ro.build.changelist=493499
ro.build.buildtag=
# end build properties
#
# system.prop for P3
#

ro.opengles.version = 131072
wifi.interface=eth0
rild.libpath=/system/lib/libsec-ril-apalone.so
rild.libargs=-d /dev/ttys0
keyguard.no_require_sim=yes

# Samsung Tvout Service
ro.sectvout.enable=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.config.ringtone=S_Minimal_tone.ogg
ro.config.notification_sound=S_On_time.ogg
ro.config.alarm_alert=Good_Morning.ogg
dev.sfbootcomplete=0
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=288m
ro.secdevenc=true
ro.carrier=wifi-only
drm.service.enabled=true
ro.setupwizard.mode=OPTIONAL
ro.setupwizard.enterprise_mode=1
ro.com.google.gmsversion=3.1_r2
ro.error.receiver.system.apps=com.google.android.feedback
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.clientidbase=android-samsung
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt

So it is newer than KME

Impressions...
ITs very fluid and responsive specially when dealing with widgets . I personally find it more so than KME

Flashing via ODIN

Make sure you have odin 3 1.85 you can get it here
http://www.multiupload.com/5QR3X8PHWW
Make sure you have the correct pit file to flash you can get it here
http://hotfile.com/dl/132389181/e245...G_32G.pit.html
Unzipp your GT-P7510_SER_P7510XWKH5_P7510OXEKH2.rar
You will get a file called P7510XWKH5_P7510OXEKH2_HOME.TAR.md5
Assuming that you have backup all your important information on your tab to a PC make sure your tab is disconnected from your PC
Put tab in download mode (if not sure how to then don't precede)
Start odin first before connecting your tab to the PC
Tick on Re-Partition
Place the pit you downloaded earlier under the pit section (press pit button)
Place the tar.md5 you extracted earlier under the PDA section(press PDA button)
Assuming your tab is in download mode connect tab to your PC
Wait for odin to detect your tab ( the ID:COM box will be highlighted yellow)
Hit START button (it will take approx 2 to 5 mins to flash)
If all successful then you will see a green Pass on Odin
Your tab will reboot into the stock recovery 3e menu. You will see some errors in red but ignore them (use vol up /down and power button to select similar to what you are use to in CWM)
Once in the recovery 3e menu choose "Wipe Data/Factory Reset" and hit enter by pressing the Power button (similar to what you will do in CWM recovery)
Once you are notified that wiping is complete select to reboot your tab (again use vol up/down similar to CWM)
Once your tab is rebooted you will be presented with a russian language text (you can select from the drop down menu english! if you can't understand russian)
Begin in setting up your google account and your tab enjoy

Rooting
As this tab uses the same recovery you will expect from KME it is unlocked. (3e) so it is possible to simply flash via the stock recovery the root zip and lo and behold you are in root
There are 2 main ways of doing this.. one is a long way and the other a short way
The long way is the one where you first need to flash CWM via odin and then use CWM to flash the root exploit
For more info see http://forum.xda-developers.com/show....php?t=1171089
Benefits: It is possible to do a backup of your stock rom without been rooted for warranty purposes?

The easy way to gain root is
In your tab create a directory call it Myroot (can be any directory name under /mnt/sdcard) the crucial thing is that the directory name must start with a capital
so Myroot is a good directory name where as myroot is a BAD directory name.
(Stock 3E has problems recognising lowercase dir names!)

Download the root exploit http://hotfile.com/dl/132392484/6815..._root.zip.html (its the same one found under this post http://forum.xda-developers.com/show....php?t=1171089 )
Connect your tab to the PC and save the file to the directory you created (the one that has an upper case word (e.g. Myroot)
Disconnect your tab from the PC and switch your tab off
Put your tab in recovery mod
Once in recovery select 'Apply update from sd card'
Locate the directory where you placed the root exploit zip file (e.g. in Myroot dir)
Choose power button to select
Reboot device
Once rebooted in to your device your device has now root

Gaining CWM into KH5
Simply download Rom manager from market and select Flash ClockworkMod recovery
and apply root access when requested...and thats it!

Enhancing your tab experience
I had downloaded SpareParts+ from the market and made the following mods
- Windows animations chose FAST
- Transition animations chose FAST

I had downloaded Blade Buddy from the market and made the following mods
- went to advance settings
- applied root into it
- ticked debug.sf.hw
- rebooted tab
enjoy!

System dump for the Devs
http://www.multiupload.com/16O8LCEIX7

Even without the last mod this rom is so smooth!

Supported languages
* English
* Indonesian
* Catalan
* Deutsh
* Cestina
* Spanish (español)
* Estonian
* Francais
* Icelandic
* Hrvatski
* Italiano
* Kazakh
* Latviesu
* Lietuviu
* Magyar
* Nederlands
* Polski
* Portuguese
* Romana
* Slovenian
* Swedish
* Vietnam
* Turkish
* Russian
* Chinese
* Korean