Guide: How To Flash Any Rom You Want (AOSP Or Sense) w/ HBoot 1.50.......
This is a guide that hopefully makes things easier so you don't have to use Fastboot but instead use this app....all credit goes to joeykrim......
Searched everywhere and didn't see this info covered. So if this has already been stated, I'm a noob, and I apologize.......
So I found this app made by joeykrim a few days ago to be quite useful......Sadly my EVO 3D came out the box with HBoot 1.50 and my only option was to use HTC's Unlock Method....As you may know this method doesn't allow you to Flash custom kernels or roms with custom kernels baked in VIA recovery....the workaround was that you had to flash by using fastboot.......until now.....
So let's say your running your favorite sense rom, and decide that you wanna try out miui or cyanogenmod or vice versa.......normally you would need your computer to boot into fastboot, but thanks to joeykrims Flash Image GUI app you can flash the AOSP or Sense kernel, then the rom, and there you go....
1st Step: Download and Install this
http://www.google.com/m/url?ei=rS2bT...dtDDbSG8eGuM2w
2nd Step: Download an AOSP Kernel if you moving from a sense rom to an AOSP rom.....Download a sense kernel if your moving from an AOSP rom to a sense rom and place it on your sdcard.
3rd Step: Open the app and select Kernel Image.
4th Step: Tap browse and navigate to the .zip that contains your kernel and select it......
5th Step: Tap Flash Image......Wait for it to finish flashing.....
6th Step: Reboot while holding Volume Down button.....
Final Step: Flash the rom that goes with your kernel.....if you just flashed an AOSP Kernel flash an AOSP rom, if you flashed a sense kernel then flash a sense rom......
Enjoy and i hope this was helpful..........