Any news about Ramos W12 v2.0 compatibility?
I need a good rom

Originally Posted by murigny64

- aml_autoscript work if you have installed 2.3.4 before but doesn't work if you have 4.03 (i think memory mapping is different between 2.3.4/4.0.3)

u-boot need to be configured to use aml_autoscript. I guess u-boot included in ICS ROM is not configured to use aml_autoscript.

and sorry, currently I can't support ICS ROM updated models. my NOVO8 has no ICS update.

Originally Posted by murigny64

CT1002 is really the same as winaccord PTT-1026, wayteq X-TAB100, Digma IDX10 and Boulanger ST1001(16go).

someone reports ICS ROM for WayteQ xTAB-100 didn't work correctly on Digma iDx10. I can understand you call they are clones, but they are different for me. it's important to understand difference to make usable CWM/CM.

EDIT:
well... you can use my CM9 for iDX10 and ICS ROM for xTAB-100. then iDX10 and xTAB-100 should be same. hmmmmmm...?

can you try official iDX10 rom on your CT1002? I want to know any small issue.

EDIT2:
can anyone who has iDX10 try rom for CT1002?

Originally Posted by murigny64

We have also CT704v1, it's a IDX7 clone but with a different wifi ship (no bt).
CM9 work on ct704v1 (idx7 h1106) but no wifi and no sound

no 2.3 ROM for CT704v1? I guess hw video doesn't work with kernel in 2.2 ROM...

Originally Posted by Xelit

I get WayteK ICS firmware, bring em on iDx103G... works, but all buttons, except vol+/vol- did not work a lot of system elements on madyar, independs on language settings.
Kernel 3.0.8

Users on prohardver forum reports that buttons don't work on xtab 100, so I think idx10 and xtab100 are identical.

Sent from my ST15i using Tapatalk

Originally Posted by fun_

I'll add dejitter, but it will be done differently because I want to use dejitter on other tablets.

the method discussed in psquare's ICS ROM thread should work on my CM9. please try.

please don't use my zip becouse I add kernel for CM7 and ICS, not for CM9!
Also, I tested and don't works, maybe there is a problem with "TouchScreen Legacy". However I builded a new ROM, will be released soon with sources

Please wait tonight

Originally Posted by qryak

Users on prohardver forum reports that buttons don't work on xtab 100, so I think idx10 and xtab100 are identical.

oh thanks!

Originally Posted by psquare

please don't use my zip becouse I add kernel for CM7 and ICS, not for CM9!
Also, I tested and don't works, maybe there is a problem with "TouchScreen Legacy". However I builded a new ROM, will be released soon with sources

Please wait tonight

yes, without TS-legacy, dejitter works fine

Originally Posted by psquare

yes, without TS-legacy, dejitter works fine

sorry, what's TS-legacy?

Originally Posted by qryak

Users on prohardver forum reports that buttons don't work on xtab 100, so I think idx10 and xtab100 are identical.

Sent from my ST15i using Tapatalk

Wayteq / Winaccord ICS ROMs are not configured to use touch buttons.

It's real ICS.

Originally Posted by murigny64

Wayteq / Winaccord ICS ROMs are not configured to use touch buttons.

It's real ICS.

I'm not discussing it's a real or fake. I wanted to know these tablets are same or not.

anyway, thank you all.

@ fun_

no 2.3 ROM for CT704v1? I guess hw video doesn't work with kernel in 2.2 ROM...

Yes, there is no 2.3 for this model.

With CM9 (h1106), HW video work nice, only wifi and audio not work.