Originally Posted by murigny64

Auraslate 1026 = Winaccord ptt-1026 = Essentiel'B ST1001 = Carrefour CT1002 = Wayteq xtab100 = Digma IDX10 = Qumo Dotcom.

It's all the same, so, it work

That's what I was hoping you'd say!

Originally Posted by fun_

* How to boot ClockworkMod Recovery 5
1. download recovery.zip and unzip it
2. put aml_autoscript and uImage_cwm on root of SD card
3. insert SD card
4. power on

you can flash uImage_cwm directly into recovery partition. then, you can boot recovery with VOL+ + POWER.
ClockworkMod Recovery 5 can't install official update.zip. if you want to reinstall official ROM, use uImage_recovery in official ROM.

i think I may be missing something as when I try this I do not see CWM. Could you tell me which files should be (and also those that should NOT be) on the root of my SDCard and what I am meant to be doing when the files are there?



I very much appreciate your help! Cheers!

Sent from my Auraslate 1026 using xda premium

if you are on ics, this method doesn't work. You must before downgrade to ginger and then, retry this method.

It's because aml_autoscript boot method is not implemented on ics and memory mapping is not compatible with cm9. cm9 is based on the same kernel as ginger.

Originally Posted by murigny64

if you are on ics, this method doesn't work. You must before downgrade to ginger and then, retry this method.

It's because aml_autoscript boot method is not implemented on ics and memory mapping is not compatible with cm9. cm9 is based on the same kernel as ginger.

Thanks, I've just downgraded to GB and now I have CWM working!

I do have one more issue though (sorry). Having done this:

Originally Posted by fun_

* How to boot ClockworkMod Recovery 5
1. download recovery.zip and unzip it
2. put aml_autoscript and uImage_cwm on root of SD card
3. insert SD card
4. power on

I can get into CWM. I also have the update.zip on the SDCard and then I did this:

Originally Posted by fun_

* How to install CyanogenMod 9
1. download update.zip and put it on internal NAND flash or SD card (don't unzip it)
2. reboot recovery
3. install update.zip
4. wipe data/factory reset *1
5. reboot

*1 only if you are upgrading from non-CM9 ROM (CM9 1st install)

How do I then boot into CM9? Rebooting with either or neither of the volume buttons pressed just brings it back to CWM.

Thanks again for your assistance and patience!

Originally Posted by jimmygoska

How do I then boot into CM9? Rebooting with either or neither of the volume buttons pressed just brings it back to CWM.

delete aml_autoscript from SD card, or remove SD card.

Originally Posted by fun_

delete aml_autoscript from SD card, or remove SD card.

I tried removing it and all I had when I booted was a black screen with one white pixel in the corner. Wiped, flashed and tried again with the sdcard inserted but the aml file deleted and it boots fine. I'm assuming that to use CWM we have to put the file back, reboot, make changes, remove the file and reboot?

Thanks!

Sent from my HTC Desire S using xda premium

Originally Posted by jimmygoska

I'm assuming that to use CWM we have to put the file back, reboot, make changes, remove the file and reboot?

please read "* How to boot ClockworkMod Recovery 5"

really the biggest problem I'm having is how to repack the images correctly after I unpack and edit them. It seems it packs it wrong as the tablet won't boot. can you tell me how you are repacking the files?

Hello from Ukraine!

---

Hi all. I try unpack boot.img from update.zip , but when i type in terminal ./unpack-bootimg.pl boot.img i got next:
Could not find any embedded ramdisk images. Are you sure this is a full boot image?

Help me please . I want get ramdisk.cpio.gz or ramdisk.img .

thank you.

P.S: sorry to my bad English...
I try to create a kernel for cyanogen 7 for my Ramos W10 tablet.

Originally Posted by navishade

Hi all. I try unpack boot.img from update.zip , but when i type in terminal ./unpack-bootimg.pl boot.img i got next:
Could not find any embedded ramdisk images. Are you sure this is a full boot image?

Help me please . I want get ramdisk.cpio.gz or ramdisk.img .

thank you.

P.S: sorry to my bad English...
I try to create a kernel for cyanogen 7 for my Ramos W10 tablet.

Hi, try my scripts
https://github.com/psquare/uImage_builder
should work for all amlogic kernel

bye

Hi,
I build last cm9 for NOVO8

download
http://origovacua.altervista.org/wor...genmod9-novo8/

bye