Can anyone tell me what this means?

---

<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_KD1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
<ID:0/003> NAND Write Start!!
<ID:0/003> param.lfs
<ID:0/003> factoryfs.rfs
<ID:0/003> data.rfs
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)


I get this constantly trying to flash odin PDA_KD1.tar.md5

I notice that when I boot up it only has 30mb of internal memory available.. any reason as to know why?

*************************
UPDATE!!!!!

12:17AM Central

I have fully restored my rom with Mr. bkoon1218 assistance!!!

Here's what I did just in case anyone runs into what I did. I will say what mistakes I had done and then give my resolutions that couldn't have been possible without the assistance of these awesome members!

1. I was curious on flashing a custom recovery to my device, STUPIDLY I did not read or research anything regarding this phone.

2. I flashed Cmenard with heimdall-suite-1.1.1-win32 thinking that it would give me a recovery because I thought that I had the Samsung Galaxy *Vibrant*

3.Two days stressfully googling and googling for corrections and mistakes other may have done like me I had no choice but to ask myself.
I started off in the Vibrant section and a guy helped me out with flashing the rom but still nothing. Given instructions I felt my phone was done. I would get glitches and a nasty pixelated boot.

4. I researched my phone model number on the back of my phone and realized my phone wasn't the Vibrant.. Then it banged my head when another emailed me saying it was weird that my Samsung Vibrant was a 4g device lol.

5. I then moved to Samsung Galaxy S 4g and proceeded to find help along with the research I had done.. I even tried all the Odin updates thinking that could've made the difference.

*Resolution*

1. THANKS TO ALL FOR HELPING FIRST OFF ALL!!! YOU ARE ALL GREATLY APPRECIATED!! Next! A BIG THANKS! to * bkoon1218 *
for providing me with a helpful link where I read and understood what this rom was for. LINK - http://forum.xda-developers.com/show....php?t=1129933

2.Downloading Hawk.zip file I then used Winrar to extract it and there are four files!
-1.SGH-T959V-CSC-TMB.tar.md5
-2.Sgs4g.pit
-3.T959VUVKC1-Phone-CL932707.tar.md5
-4.T959VUVKC1-REV00-ALL-low-CL933594.tar.md5

3. I tried Odin 1.85 and it didn't work for me however I now know the reason why and what's funny is it happend accidentally.
I forgot to uncheck Re-Partition and I thought it would immediately softbrick my phone!! I started to see however it doing it's magic!
I said "ahh might as well let it go through the process I'll just one click unbrick my phone if it doesn't do it again..". By the way I used Odin 1.7.
and poom!!!! I got a pass!!! *This was only with Checking the box Re-Partition!*

4.So I am now fully fresh back to stock and unrooted and I am done. I decided to write this for any others that go through the same problem I did. I don't mean to take anybody's credit or anything I just want other to look this up when they accidentally flash their phone with a different rom and are as lucky as I am.

**MY ENDING RESULTS**

<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T959VUVKC1-REV00-ALL-low-CL933594.tar.md5 is valid.
<OSM> T959VUVKC1-Phone-CL932707.tar.md5 is valid.
<OSM> SGH-T959V-CSC-TMB.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> zImage
<ID:0/005> boot.bin
<ID:0/005> Sbl.bin
<ID:0/005> param.lfs
<ID:0/005> factoryfs.rfs
<ID:0/005> cache.rfs
<ID:0/005> data.rfs
<ID:0/005> modem.bin
<ID:0/005> cache.rfs
<ID:0/005> data.rfs
<ID:0/005> Removed!!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)


THANK YOU ALL AND GOOD LUCK TO YOU ALL!!!!!

The lack of internal memory could be due to the amount of apps you have installed. I'm wondering if that lack of free memory is causing the problem? what ROM is currently on it (prior to you trying to flash)?

Sent from my SGH-T959V using XDA App

What rom are you trying to flash? You should try again with a different USB port after doing a battery pull and putting the phone back into download mode.

PDA_KD1.tar.md5


That's the Rom I'm flashing and it keeps failing on me.
I tried flashing it like three times again and now it just keeps vibrating every three seconds!! Its getting really annoying! Any other Odin stock Roms I can try?

At the moment I'm only rooted and have stock recovery.

Instead of flashing KD1, try KC1. Here's the link to it.

http://forum.xda-developers.com/show....php?t=1129933

There's only one download link in there. The .pit file goes into PIT. REV00 goes into PDA. Phone goes into PHONE. CSC goes into CSC. Do NOT change any of the settings in Odin.

KC1 gives you a 100% clean slate, so it'll remove root and CWM and it'll leave you with a stock Froyo ROM. It'll even restore Froyo bootloaders. In the event you screw something up, just Odin KC1 and it'll remove the gremlins.

Originally Posted by bkoon1218

Instead of flashing KD1, try KC1. Here's the link to it.

http://forum.xda-developers.com/show....php?t=1129933

There's only one download link in there. The .pit file goes into PIT. REV00 goes into PDA. Phone goes into PHONE. CSC goes into CSC. Do NOT change any of the settings in Odin.

KC1 gives you a 100% clean slate, so it'll remove root and CWM and it'll leave you with a stock Froyo ROM. It'll even restore Froyo bootloaders. In the event you screw something up, just Odin KC1 and it'll remove the gremlins.

Thanks a bunch. I really appreciate it. I've tried stock KC1 but I never used the pit and all the other files! Every thread I'd search for said only PDA. I've now learned something new. Thank you! I will try later tonight and to everyone that has been reading my questions A humongous thanks to you All!! You guys are the reason why this site is so helpful!

Originally Posted by coldcrush390

Thanks a bunch. I really appreciate it. I've tried stock KC1 but I never used the pit and all the other files! Every thread I'd search for said only PDA. I've now learned something new. Thank you! I will try later tonight and to everyone that has been reading my questions A humongous thanks to you All!! You guys are the reason why this site is so helpful!

Let us know how that works for you.

On another note, I always use KC1 as a base ROM to Odin back to Froyo. There's nothing cleaner than that.

Originally Posted by bkoon1218

Let us know how that works for you.

On another note, I always use KC1 as a base ROM to Odin back to Froyo. There's nothing cleaner than that.

I am currently setting up everything now to try once again thank you!

Ok so now I have flashed the files in the Hawk.zip and still getting the same fail at the end of the flash. I think I'm just gonna keep doing this until it will finally go through... what do you think?

Glad to know you got it resolved.

Btw, KC1 is supposed to have Re-Partition checked. Just remember that you almost never change the settings in Odin once you put in the proper files. I think this KC1 is the only one that has it checked though.

Now that you're on a clean slate again, have fun with GB.