Originally Posted by Peteflyman

Don't know really where to put this question, but since this thread is about NAND and originally Alex's concept I ask here. Currently I've been using the current available builds and think they are very good. I'm just throwing out a question here

Would there be any benefit in reviving e.g. Alex's old Froyo SD-build (the one with the Arc-theme)?
I converted it into a NAND-build, booted it and tested it shortly with zargloubs kernel from March 1st. But since I don't have skills enough I'm just gonna link to the rom. Feel free to do whatever you like with it. It's just my comparacy to see how well Froyo runs vis-a-vis Gingerbread on our Kovskys'

- Screen is mirrored and up-side-down
- data doesn't seem to work
- "Shut Down" doesn't work
- Camera works (but didn't test it with SD-card....)

Edit. Forgot to mention Did NOT reboot on missed call.

Alex's Froyo Arc 2.2.2 NAND

frx07_wifi_35_kovs_Xperia_Arc_theme.tar

It has a lot of problem
freeze a lot
wifi doesn't work
SDcard too
and other thing that you mentioned before
but it's extremely fast specially in boot

could you post the link of source
thank you

@mahmoodifar and everyone else

Forgot to mention it in my post that it's NOT INTENDED for daily use

Sources are in my post or do you have something else in mind?

I need testers for a new CM7.1 ROM. Downloads available on my forum. Thx.

Originally Posted by neopeek

I need testers for a new CM7.1 ROM. Downloads available on my forum. Thx.

I am going to download it :) Great to hear that

Thank you now I have android on my x1.

Is it possible get scandinavian keyboard buttons äåö working?

Originally Posted by pirlano

when i power off and i attach the usb wall charger, screen flash 2/3 times like was doing in android.

I tried the rom and now I have this problem too... the screen flashes when I plug in the power with the phone off, and also when I press the power button to turn it on. Even flashing the stock rom doesn't change anything.

Since I used pdocread to back up the phone's original rom before I did anything, is it possible to use pdocwrite to write it back, or would that not do what I think it would? Is there a way to reverse what the LK bootloader (?) changed?

Hardly the worst problem in the world though

Originally Posted by calacon

I tried the rom and now I have this problem too... the screen flashes when I plug in the power with the phone off, and also when I press the power button to turn it on. Even flashing the stock rom doesn't change anything.

Since I used pdocread to back up the phone's original rom before I did anything, is it possible to use pdocwrite to write it back, or would that not do what I think it would? Is there a way to reverse what the LK bootloader (?) changed?

Hardly the worst problem in the world though

Do a Task29 it will format your ROM section, then install the Windows Mobile ROMs your problem will be solved

Ah, I should have said... thanks kerfooly but I did do a task 29 and then installed WM again and it didn't change anything either! It's weird, it's like there's one part that task 29 or installing a rom doesn't touch and that one part has somehow got changed...

Wi-fi & USB

---

Hi Guys

1st of all, thank u kerfooly for the great job. Followed ur guidance and installed my 1st droid (IceDroid V7) perfectly. It's fast and stable but (there is always some but) ...


a) All Wi-fi connecting signals are "poor" and the phone never connects.

Tried connecting to a router with no security at all (just MAC filtering) wich antenna is right beside the device and signals keeps poor and dont connect.

Tried an ad-hoc wireless connection with W7 (notebook and PDA are side by side) giving poor signal and never connects.

I was using radio 1.17.25.09 ... downgraded to 1.16.25.48 and 1.14.25.55 from here but no changes at all.

Any advices ?


b) USB Connection

When plugged to USB, the phone starts recharging (as expected) but the device does not appear at Devices Manager. Not even the plugged notification appears on the X1.

Going into Settings > Applications > Development and turning USB Debugging ON, an "Android USB Device > My HTC" (drivers OK) and "Others Devices > CDC Serial" (drivers not found) entries appears on Devices Manager. A new disk drive is found and, when SD card is inserted, the files are available on Windows.

Then, I've tried installing HTC Sync but the software does not identifies any devices. (Note: before installing it, the device recognized by Windows was "HTC Desire")

When I try "USB Tethering" sometimes it gives me "USB not connected" (wich is) or a message that it's in data mode and can't perform tethering.

Any sugestions ?

Best regards.

Originally Posted by Kdio

Hi Guys

1st of all, thank u kerfooly for the great job. Followed ur guidance and installed my 1st droid (IceDroid V7) perfectly. It's fast and stable but (there is always some but) ...


a) All Wi-fi connecting signals are "poor" and the phone never connects.

Tried connecting to a router with no security at all (just MAC filtering) wich antenna is right beside the device and signals keeps poor and dont connect.

Tried an ad-hoc wireless connection with W7 (notebook and PDA are side by side) giving poor signal and never connects.

I was using radio 1.17.25.09 ... downgraded to 1.16.25.48 and 1.14.25.55 from here but no changes at all.

Any advices ?


b) USB Connection

When plugged to USB, the phone starts recharging (as expected) but the device does not appear at Devices Manager. Not even the plugged notification appears on the X1.

Going into Settings > Applications > Development and turning USB Debugging ON, an "Android USB Device > My HTC" (drivers OK) and "Others Devices > CDC Serial" (drivers not found) entries appears on Devices Manager. A new disk drive is found and, when SD card is inserted, the files are available on Windows.

Then, I've tried installing HTC Sync but the software does not identifies any devices. (Note: before installing it, the device recognized by Windows was "HTC Desire")

When I try "USB Tethering" sometimes it gives me "USB not connected" (wich is) or a message that it's in data mode and can't perform tethering.

Any sugestions ?

Best regards.

Dude, that all is kernel/developer problem. Wait till someone make a kernel with no issues. Fergy is working on it so wait and than will everything going ok.