[ROM] StreakDroid GingerStreak 2.4.4 RELEASE

---

GingerStreak 2.4.4 Release Post



A FACTORY RESET IS HIGHLY RECOMMENDED TO ALLOW THIS TO WORK CORRECTLY DUE TO THE NUMBER OF CHANGES, SO BACKUP IS RECOMMENDED

This Release Version incorporates changes in the INSTALLATION PROCESS, please read the options available to you and the correct method of applying them before proceeding to flash the 2.4.4 Zip File!

( Disclaimer : As before, this ROM is heavily updated and still being developed at a fairly rapid pace. Bugs are listed below.)


1.0 > INSTALLATION CHANGES :

With 2.4, several choices must be made before flashing the Zip file via StreakMod or Clockwork Recovery. These choices are made with very simple edits to a Text file ( explained in section 1.2 below )

Important Options Available ( other options are listed below in Section 1.1 ) -

A.Launcher Option : Users may now select their default Launcher of choice before installation. The options available are LauncherPro, ADW, Stage UI and GingerBread Launcher. GingerBread launcher is installed by default if nothing is chosen.

B.Pixel/LCD Density : Default LCD Density can be set during Installation. Values available for selection are : 120,140,180,200 and 240 DPI. also for densitys of 200 or higher a modifed contacts and phone app are installed to allow correct functionality

C.Other Settings : Other settings available include -
•us120/140/180/200/240 -
(installs build.prop with USA related Region Settings and an LCD Density of 120140/180/200/240)
•bios
( installs the Streak BIOS Bootanimation )
•noapps
(this will install an absolute base system with no additional apps installed and the gingerbread launcher as the default launcher)

1.1 > INSTALLATION HOW TO

A. You will need to create a text file on your Streak's MicroSD Card. The file can be created in your Text Editor of choice ( such as Notepad ).

B.This file will be called 'install.txt' - Ensure that this is the exact syntax and that the file is saved with a '.txt' suffix.

C.This file must be saved in the root of the sd card.

E.Inside this text file, you may type each option that you select on a separate line. All the options available to you are listed below. Here is an example :

adwlauncher
bios

That is it. You can save this text file as install.txt
You will then boot into recovery ( StreakMod or Clockwork ) and begin the Zip file installation process as usual.

! The full list of Options available are as follows :

noapps - this will install an absolute base system with no additional apps installed and the gingerbread launcher as the default launcher

adwlauncher - this installs adw launcher Launcher

launcherpro - this installs launcherpro Launcher

stageui - this installs dells Stage UI Launcher (the 1.6 version from 2.2.2 rather than the 1.5 from gb)

density120 - sets lcd_density to 120 by default

density140 - sets lcd_density to 140 by default

density180 - sets lcd_density to 180 by default

density200 - sets lcd_density to 200 by default

density240 - sets lcd_density to 240 by default

arabic - add arabic mod - will break gps

us120 - installs build.prop with usa related region settings (LCD Density of 120)

us140 - installs build.prop with usa related region settings (LCD Density of 140)

us160 - installs build.prop with usa related region settings (LCD Density of 160)

us180 - installs build.prop with usa related region settings (LCD Density of 180)

us200 - installs build.prop with usa related region settings (LCD Density of 200)

us240 - installs build.prop with usa related region settings (LCD Density of 240)

bios - installs the Streak BIOS Bootanimation thanks to Fone_Fanatic and Frysee 

noswype - removes the preinstalled swype install to allow swype beta to work

zeam - installs the zeam launcher, a free open source launcher designed to be small and fast. 

portrait - installs modified files for portrait lockscreen

2.0 > OVERVIEW/SUMMARY OF INSTALLATION PROCESS

1.Download GingerStreak-2.4.4.zip from the links below
2.Place Zip file into Root of SD Card
3.Make a text file and type in the options you would like to chose as shown above.
4.Save file under SDCard>install.txt
5.Boot into StreakMod or Clockwork Recovery
6.Select Update from Zip File > Select Zip File From SD Card > GingerStreak-2.4.4.Zip
7.Wait for installation.
8.First Boot may take longer than a normal boot. Things are being installed, stuff is being generated. Patience.
9.Enjoy.

Most Recent Stable Version: v2.4.4

-----------------
Changelogs
-----------------

changelog:
added cifs support to kernel
added reboot option to power menu
hopefully fixed slow animation of crt anim
updated system apps(gmail,market,facebook)
fixed voice search FC
Updated Busybox, SU Binary and Superuser app
Fixed flash video crashes
Removed twitter - Reinstall from Market
Added advanced installer back - See below
Fixed Alarm Crash

#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/

Please if you can and are able to donate to help me upgrade my compile server in preperation for the imminent arrival of ICS - any amount will be highly appreciated
GBP Donate | USD Donate

Rom Download Links:
Primary Download Site: http://mirror2.strea...treak-2.4.4.zip

YOU MUST FLASH THE BELOW BASEBAND AND DSP1 IMAGES TO ALLOW THIS BUILD TO WORK CORRECTLY!!

Baseband File Download:
Mirror 1: http://mirror2.strea...id.com/amss.mbn

DSP1 File Download:
Mirror 1: http://mirror2.strea...id.com/dsp1.mbn

Quick How to for flashing the above files - assuming you already have fastboot setup and configures on your pc.
1. reboot your streak and hold the camera button down until you get a white screen, then hit the fastboot option in the top left corner.
2. connect to pc and wait for streak to show FASTBOOT_MODE
3. run the following commands to flash the baseband and dsp1 then reboot

fastboot -i 0x413c flash amss amss.mbn
fastboot -i 0x413c flash dsp1 dsp1.mbn
fastboot -i 0x413c reboot

Please if you can and are able to donate to help me upgrade my compile server in preperation for the imminent arrival of ICS - any amount will be highly appreciated
GBP Donate | USD Donate

Thanks to:
Everyone for suggesting things they want adding
ALL the BETA testers who put up with multiple screwed up builds and multiple dell logo freezes to get this working, couldn of done it without you all
everyone else for just jumping in and helping each other, thats the true community sprit that makes me do this sort of dev for android and not some other mobile os.
everyone else who helped/is helping
ALL THE TESTERS DESERVE HUGE THANKS FOR THEIR HELP EVERYONE !!

woohoo!! Your the Man

Wow.. downing StreakDroid as of now!

Sent from my Dell Streak using xda premium

thank you man! (i just wish to add a quick heads up: most apps will show as "not compatible" with your phone in the android market (both web interface and new 3.x app) if you specify an LCD density different than 160 or 240 - keep that in mind!)

Looks good. Up and running - I'll report back within the next days. Thanks Steve!

Thanks Steve!

EDIT:

No more FCs except for the mail/Exchange app-- hope you can do something about it in the next release.

looks good and very fast.
thank you!

one question: why this rom shows android version of 2.3.3 in settings?

Originally Posted by johnnyPPK

looks good and very fast.
thank you!

one question: why this rom shows android version of 2.3.3 in settings?

probably because it is 2.3.3 customly enhanced for use with streak5. thusly it's name is Gingerstreak 2.4.4. due to the many changes DJ-steve and Fards made within the firmware..

another awesome creation


Sent from my Dell Streak using Tapatalk

Thanks DJ Steve and fards working great and alot faster .!!!!

GhumanStreaK