[Q] How can I reset the binary counter?

---

I managed to get rid of the yellow triangle but the counter is stock at 7.
Somebody has an idea how to reset that?

Sent from my GT-N7000 using xda premium

forum.xda-developers.com/showthread.php?t=1328671


You need a jiig, this method works perfectly

Originally Posted by geek78

forum.xda-developers.com/showthread.php?t=1328671


You need a jiig, this method works perfectly

But not on the Note!!

Sent from my GT-N7000 using XDA App

Originally Posted by Jeshter2000

But not on the Note!!

Sent from my GT-N7000 using XDA App

Please, read before writing there is a link on my post...

Originally Posted by geek78

forum.xda-developers.com/showthread.php?t=1328671


You need a jiig, this method works perfectly

Tnx for th link.
I think I'm not going to do all that.
It's not worth it.
You only loose your warranty when you brick your phone do to overclocking or similar.


Sent from my GT-N7000 using xda premium

Im not dumb man whit a Jig it is not possible only flashing bootloaders from Sgs2 ...

Sent from my GT-N7000 using XDA App

Originally Posted by deaad

Tnx for th link.
I think I'm not going to do all that.
It's not worth it.
You only loose your warranty when you brick your phone do to overclocking or similar.


Sent from my GT-N7000 using xda premium

before open new thread,plese read the forum rules!!!!!

this is an Note developers thread,not Q&A or General sections

Originally Posted by Jeshter2000

Im not dumb man whit a Jig it is not possible only flashing bootloaders from Sgs2 ...

Sent from my GT-N7000 using XDA App

And so reset the counter as asked ... As i did ... Have you read the subject of thé thread ?

Originally Posted by alesscam

before open new thread,plese read the forum rules!!!!!

this is an Note developers thread,not Q&A or General sections

Oeps... , you're so right.
My bad.

Sent from my GT-N7000 using xda premium

jig n binary counter

---

Dude, rig apart a micro usb lead, quid at a cheap shop, cut the rubber casing around the plug exposing the pinscut the wires off or desolder em off.

Buy some 300k 1/4 watch resistors from maplin.co.uk, 10 pack for a quid.

Solder one end of the resistor to pin 4, the other end to pin 5.

Encase it in electricians tape or something, stick it in phone and bingo, boots into download mode, phone must be off first.

I made one, £2, reset the counter on my scl i9003, also works on my galaxy note, also handy if ya brick ya phone.