HELP PLEASE - EVO 3D Stuck in Bootloop!

---

Hello All,

I recently rooted my EVO3D using the HTCDEV method because the bootloader was version 1.5.
Here are the steps I followed to root (sorry for the copy and past but I want to be as detailed as possible)

Files Used
su 2.3.6.3
TWRP Recovery

Steps Taken:

1)Take both the su.zip and recovery.img files and put them in your sdk tools folder.

2)Now do the following in ur command prompt, hitting enter after each command.

3)Code:adb push recovery.img /sdcard/And,

4)Code:adb push su-2.3.6.3.zip /sdcard/Then,

5)Code:adb reboot bootloaderUr phone will go to fastboot and should look like the after picture above. Now you can flash the twrp recovery, so do,

6)Code:fastboot flash recovery recovery.imgIt will ouput something like this,

7)Code:sending 'recovery' <5068 KB>... OKAY////writing 'recovery'... OKAY///finished. total time: 11.355sNow you have twrp recovery, so you can navigate to it. On ur phone, use the power button to pick bootloader, then scroll down to recovery and pick that. You will then be booted into recovery.

8)Here you can pick "install zip" and then pick the "su-2.3.6.3.zip"
It will flash, the you can pick "back to main menu", then "reboot system now"

9)You will boot back up and have working Superuser. I have had no trouble with Titanium Backup, Root Explorer, Quick Boot or any other app that requires root. Before you do too much, it would be good to go back to recovery and do a Nandroid backup. Always best to get one ready before you start modding anything.


All of this worked fine, and the phone was "unlocked."
Then, I flashed the most recent version of CleanRom (2.7)
Again, the phone worked fine, battery life was a little crappy.
I decided to flash Ziggy's kernel.I flashed the kernel simply by putting on the SD card, and then rebooting into recovery. This worked fine as well, but I noticed some of the buttons for example the menu popups displayed volume where it should have said more, or bluetooth options where it should have said preferences. so this is where the trouble started, I downloaded kernel manager, and flashed silverneedle through that program. Now, I am stuck at the White HTC Splash screen bootloop. The phone turns on and after 15 seconds reboots, and reboots, and reboots.

What Ive attempted:
I have done countless wipes and clears of the dalvik cache and cache
ive formatted the system and the date sections (advanced menu in twrp)
ive reflashed the rom after wiping countless times
ive tried flashing different kernels in recovery to no avail
factory reset and wipe havent helped
im not concerned losing the contents of the SD card

I need help because I already had two phone claims in the past 11 months, and if I claim another lost phone I will lose insurance for life with Asurion (sprint)


anytips or help would be greatly appreciated
i can provide any additional info

Similar situation, Not sure if you've already solved the problem but I'm going to copy paste my solution from another thread...


Hi, I'm not sure if this is the right place to ask but this is a preety derp question. I've gone across the internet and tried a lot of reflashing to repair my sort of "bricked" evo. What happened, was that I had a evo 3d s-on htc bootloader unlocked, with custom recovery -clockwork..anyways I had flashed the leedroid 3d 4.0 rom and It worked the only problem was my wifi, so i attempted to flash another kernel onto it, but I had accidently flashed "Rcmix" kernel which I later found out was cdma =.=. so now my phone keeps rebooting at the htc screen, it would just load up with the green htc letters, then after 10 seconds or so it'd reboot, and then begin the process again. I can boot into bootloader and recovery but whatever I flash doesn't seem to work including restoring my backups...and then the battery died so i couldn't even charge it or go in. But i managed to work out I could load into bootloader from the CMD and the furthest i've gotten to is to have the bootloader show FASTBOOT USB. SO I must be getting somewhere...? I did read that i had to load from the cmd and not just from power+vol down..but I'd appreciate any help towards restoring my phone to the way it is or at least before i flashed the rcmix.

Just a note tho I've tried factory resetting but all i get is that it loads into recovery at the bootloader options i dont get "clear storage" as an option and "restore to factory settings" and what not just boots me into recovery agian.

EDIT:

I Managed to fix the phoneeee!!!..just for future preferences and anyone else who has this problem...

I followed bits and piece of IL DUCE's advice to izzy spun, the important part was booting the recovery from cmd. I wasn't able to "erase recovery" But I tried just booting it,

First I would remove the battery,

Put it back in,

Plug the usb cable in

1. Type command, from your Adb/fasboot folder, "adb reboot-bootloader"

2. After that I made sure my bootloader said "Fastboot USB", and then I issued the command, "fastboot boot cwm-4.0.1.4-shooteru.img" or with whatever recovery you had..

3. From there I restored from my backups my original rom. Rebooting, and fixed.

--- and It worked. At the time I was on clock work recovery, i only had the Revolutionary recovery img. Cwm-4.0.14.-shooteru.img to be exact,

after going in there I just cleared the cache and davlik and then, proceeded to restore my backups (I'm not sure if it would've worked if I had re-flashed the leedroid or a custom rom)

and then I simply rebooted the phone, and it got back into my phones original state before leedroid (as I had Only backedup before then)....

Apologies for the lengthly post, but I guess reading does help, but I've been going nuts before I managed to fix this. Just thought I'd leave this post incase someone were to need this.

Same problem

---

Hi there. I just recently joined so excuse my noobness but i have a similar problem. I recently just rooted my evo 3d sprint with the the boot 1.5 and everything went well. I decided i wanted to overclock my phone so i followed zeemaxs way. Before going into the overclock procedure i decided to do the the RCMIX Evo 3d kernel v. 2.2.3 first so i would have better results when done with the overclock procedure.I bootup the kernel through the recovery mode on the phone butit failed to load so i just reeboted. After that my wifi and 4g stopped working. So i downloaded an app on the market called "flash image GUI" which lets me flash the kernels through the app. I flashed the RCMIX kernel and rebooted and now im stuck ima boot loop. I COULD just go back and back up to my old rom and settings etc...........but the problem is i dintmake any kind of back up or recovery i think. I know i know im stupid and an idiot but i just sort of panicked n ended up with this. If anyone can help please tell me.I do not want to pay for a new phone at full price. PLEASE HELP THIS POOR NOOB!!!!! X(

Originally Posted by awsomepanda20

Hi there. I just recently joined so excuse my noobness but i have a similar problem. I recently just rooted my evo 3d sprint with the the boot 1.5 and everything went well. I decided i wanted to overclock my phone so i followed zeemaxs way. Before going into the overclock procedure i decided to do the the RCMIX Evo 3d kernel v. 2.2.3 first so i would have better results when done with the overclock procedure.I bootup the kernel through the recovery mode on the phone butit failed to load so i just reeboted. After that my wifi and 4g stopped working. So i downloaded an app on the market called "flash image GUI" which lets me flash the kernels through the app. I flashed the RCMIX kernel and rebooted and now im stuck ima boot loop. I COULD just go back and back up to my old rom and settings etc...........but the problem is i dintmake any kind of back up or recovery i think. I know i know im stupid and an idiot but i just sort of panicked n ended up with this. If anyone can help please tell me.I do not want to pay for a new phone at full price. PLEASE HELP THIS POOR NOOB!!!!! X(

What your going to have to do is flash the original kernel you started with. thats why your in a bootloop

Similar problem :(

---

Hi everyone!

I have a kind of similar problem, so I won't post it in a new thread.
Yesterday I rooted my phone following this guide: androidforums.com/evo-3d-all-things-root/494212-complete-newbies-guide-rooting-flashing-evo-3d-roms-kernels-using-fastboot . html (i am not allowed to post links to prevent spam).
I unlocked it with htcdev and installed a custom ROM without getting any errors. After restarting the phone, it got into a boot loop; it showed the starting animations of htc and the ROM and then shut down again.

Here some more information:
-Evo 3d Europe gsm
-hboot 1.5
-s-on
-image version 3.28.401
-installed ROMs using clockworkrecoverymod (as proposed in guide)

I have tried these ROMs (all leading to boot loop):
ICS NonSense
Cyanogen Mod 10 – DisarmedToaster (v. 1.4 and 1.5)
Jelly Bean 3d (by Ubuntuz)
SAD 2.1 DEsenseX

I installed the ROMs by doing:
Connect device via usb > flash boot.img via fastboot (from pc) > clear Cashe/UserData/DalvikVM > install rom.zip from sdcard > reboot

I really don't know what to try
Any ideas how I could install a running Android OS are highly appreciated.
Thx for any help

Problem solved!

---

Ok, I solved the problem by simply relocking the phone and installing the stock ROM with the RUU.exe

RUU.exe

---

I'm glad someone else mentioned Relocking before running the RUU. I've read several posts be others that have actually stated that Relocking wasn't necessary but in order for the RUU to take you have to Relock. IF you get a chance check out CoolICS Rom and MeanRom both are pretty good.