[ROM][2.3.7]CyanogenMod 7.1 KANG & ClockworkMod 5.x for Galaxy Gio (RC-3.0)

Status
Not open for further replies.
Search This thread

phiexz

Senior Member
Sep 24, 2011
429
2,075
Bandung~
Android 2.3.7 - Cyanogen Mod 7.1.0 For Galaxy GIO
Based on Cooper, Tass & Galaxy 5

NOTE: This project is not finished yet and i am not maintain this Cyanogen Mod 7.1.0 again.
go to This Thread for latest CyanogenMod ROM

THE ONLY RULE ON CYANOGENMOD: YOU DONT ASK FOR ETA

Current status:

Working:
  • RIL
  • ext4 on all internal partition
  • Audio
  • capasitive key & back light
  • Proxomity sensor
  • Microphone
  • Root & Busybox
  • Setup wizard
  • included gapps
  • autorotate
  • packet data
  • GPRS &EDGE (2G)
  • HSDPA & UMTS (3G)
  • Call, sms & mms
  • GPS
  • Swap support
  • usb mass storage
  • headset button. so u can play/pause music & goto next song from this button
  • Bluetooth
  • Wifi
  • FM Radio (Bluetooth must enabled)
  • Camera & Video record
  • Wired Tether using wiredtether.apk (see post & attachment on second post)
  • Access Point / Portable Hotspot
  • automatically configured APN
  • Hardware video acceleration
  • and more

Not working:
  • ----

Issue:
  • Backlight after set brightness
  • some option on setting
  • noise on FM radio

if u find any bug, please tell us

I am not responsible for any damage to your phone
please read carefully how to install

How to Install
Code:
- Download & flash px-cwm-v2.zip from recovery or cwm recovery
- Reboot to cwm recovery again
- Download & flash px-cm7-RC-3.0.zip from cwm recovery
- Reboot your phone
- Its not recomennded to use live walpaper, u should use static walpaper. since live walpaper will make your device hot & drain more battery
- Since this version is not include gapps & a2sd, u should read gapps & s2e section!
- for alternative a2sd, u also can use link2sd or mad2sd


How Install google apps (gapps):
Code:
- Download it from here: http://wiki.cyanogenmod.com/index.php?title=Latest_Version/Google_Apps
- Download latest version for cyanogenMod 7
- Flash it from cwm recovery

How to Install & Enable Simple2Ext (S2E):
Code:
- install it from market. be sure u've install gapps before!
- open s2e, and press menu and choose setting
- checklist the advance mode, extended partitions info, mount as ext4
- u also can set read buffer. i'm using 3Mb
- press back, and press menu -> reboot
- if your phone not automatic reboot, u should reboot it manually
- after reboot, open s2e again. u can check whatever u want
- i'm check it all, except Application data (Application data = a2sd extream datasd)
- reboot again
- u need to modified 02gio. see this post http://xdaforums.com/showpost.php?p=19792902&postcount=705

have problem cant checklist application, dalvik-cache, private-apps application-data on s2e after checked mount as ext4 and reboot?
you must format your second partition using computer as ext4
u can use gparted (linux) or minitool partition wizard (windows)

How Enable a2sd:
Code:
- goto terminal emulator
- write:
  su
  a2sd zipalign
  a2sd cachesdreset

and:

if u want use a2sd extream (move data to sd-ext):
a2sd datasd

------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------

Additional Feature from member & developer
  • Randomboot animation & market v 2.3.6 by squadzone -> here
  • Stock samsung keyboard on cm7 by belyava -> Here
  • Transparent Touchwiz (samsung home) by shiftyHungary -> here

Source: https://github.com/phiexz

please help us to develop this rom, and tell us if you found another bugs
 
Last edited:

phiexz

Senior Member
Sep 24, 2011
429
2,075
Bandung~
Changelog & Download link

Changelog

New CWM v2
ufxqbatj.gif

special thx to ZimniY
  • fix error mount command
  • remove rfs support

New RC 3.0
ufxqbatj.gif

  • new build (new feature like: can change network preferences, minimal ring lockscreen, etc)
  • include all fix
  • removed a2sd (better use s2e than a2sd)
  • removed gapps
  • removed no-frills (use cm-setting to change cpu min max & governor)
  • smoother
  • better ram management (kernel patch)
  • fix cm-setting for change min & max cpu frequency (kernel patch)
  • revert backlight. sometime led cant off after set brightness. restart to make it normal again
  • update default governor to: ondemand min:245Mhz max:787Mhz
  • and more
note: this version is not coming with google apps, u should download & install it manually
note: this version is not coming with preinstalled a2sd DarkTremor. better to use s2e a.k.a simple 2 ext. download it from market!

New RC 2.0
  • Fixed Access Point / Portable Hotspot now u dont need 3rd application
  • modified many library, thx to squadzone
  • reduce noise when listen FM-Radio
  • Fixed new market for Force Close. now u can use new market
  • change a2sd mountpoint from /system/sd to /sd-ext
  • trying to patch backlight again, please check & report!
  • Change dafault cpu clock & governor to: min:245 max:787 gov: interactiveX
    if you dont like this governor, try to change with no-Frills application

- New Patch 2.2
  • fixed camera orientation on cm7 camera application (thanks to demon-e398)
  • fixed automatic APN setting
    goto setting -> wifi&network -> mobile network ->access point name - press menu button & tap to Reset to default
  • Deleted wiredtether.apk from /system/app
    you should install it as usual don't push to /system/app, download it from attachment below
  • kernel updatet (cf-root release 5)
    • Busybox upgraded from 1.17-> 1.19-CM71-bionic
    • Latest Superuser.apk & su binary

- New Patch fix-2, Camera & backlight fixed & added new boot script
thx to galaxy gio cummunity @ facebook for camera, waqasshahzad1986 for backlight issue fix & squadzone for boot script
- New Patch fix-1, it should fix a2sd DarkTremor, bluetooth, wifi & FM-Radio
- New Kernel px-cm7-kernel+cfroot-release-3.2 fixed backlight issue, sometime backlight still on even screen in locked
- First version Relase (beta)


Download Link

ClockWorkMod Recovery 5.x
Based on particle's CWM Recovery, only add ext4 support for system, data & cache
px-cwm-v2.zip Download here [New]
px-cwm.zip]Download Here [outdated]

CyanogenMod 7.1 for Galaxy GIO
cyanogenMod 7.1 RC 3.0 Download Here [New]
cyanogenMod 7.1 RC 2.0 Download Here [outdated]
First release, Download Here [outdated]

Addons & Patchl
px-cm7-addons-fix-2.2 Download Here [outdated]
px-cm7-addons-fix-1 Download Here [outdated]

-------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------
Alternatiive kernel
It's outdated... please dont use this kernel. new kernel is included on addons

we use alternative kernel, it's based on SGA & SGS CF-Root Kernel. because we have a problem on CM7 initramfs kernel on our device. maybe it'll fixed soon.
tempoary, use this kernel to make your phone bootup

px-cm7-kernel+cfroot-release-3.2 Download Here [outdated]
px-cm7-kernel+cfroot-release-3.1 Download Here [outdated]
 

Attachments

  • WiredTether.apk
    268.4 KB · Views: 1,844
Last edited:

Darkshado

Senior Member
Apr 16, 2011
1,028
501
Montréal
Nvidia Shield Tablet
Nexus 6
phiexz: do you guys have a Git repo I could take a look at?

I'm having some trouble building CM7 for the Gio5660M. I'm hitting the following error:

make: *** No rule to make target `out/target/product/gio5660M/obj/lib/libaudio.so', needed by `out/target/product/gio5660M/obj/SHARED_LIBRARIES/libaudioflinger_intermediates/LINKED/libaudioflinger.so'. Stop.

Thanks in advance,

Darkshado
 

falqon

Senior Member
phiexz, u're such a genius man, many people depends on u guys 'bout this cm7, i really appreciate of your hard work to build n finish this rom :)
i've got one little question :
should i repartition my sdcard to ext4, 'coz my sdcard partition is ext2 right now ??
thanks b4 n after !!!;)
 
  • Like
Reactions: SaMsUnG_GiO

phiexz

Senior Member
Sep 24, 2011
429
2,075
Bandung~
we need some one can make cyanogen initramfs for this rom

phiexz: do you guys have a Git repo I could take a look at?

I'm having some trouble building CM7 for the Gio5660M. I'm hitting the following error:

make: *** No rule to make target `out/target/product/gio5660M/obj/lib/libaudio.so', needed by `out/target/product/gio5660M/obj/SHARED_LIBRARIES/libaudioflinger_intermediates/LINKED/libaudioflinger.so'. Stop.

Thanks in advance,

Darkshado
no i dont have cm7 github, i only have kernel github

phiexz, u're such a genius man, many people depends on u guys 'bout this cm7, i really appreciate of your hard work to build n finish this rom :)
i've got one little question :
should i repartition my sdcard to ext4, 'coz my sdcard partition is ext2 right now ??
thanks b4 n after !!!;)

its upto you, u can use ext2 or ext2 :D
 
Last edited:

waqasleo17

Senior Member
Feb 16, 2011
339
120
Whats the clock speed of the cpu. ur scores are pretty high. I m using the 2.3.4 particle with 902 mhz but unable to get such a high score. i scored about 2087
 

shuegig

Senior Member
Aug 21, 2011
551
30
LaLaLa land :)
Oh, sorry i tot it was the previous beta.cm7 :p
Btw, is the wifi gonna be fixed soon? Cos as far as i see it, its the only big prob for me o_O
And is there anything we non developers can do? :)

Sent from my GT-S5660 using XDA Premium App
 
Status
Not open for further replies.

Top Liked Posts

  • There are no posts matching your filters.
  • 93
    Android 2.3.7 - Cyanogen Mod 7.1.0 For Galaxy GIO
    Based on Cooper, Tass & Galaxy 5

    NOTE: This project is not finished yet and i am not maintain this Cyanogen Mod 7.1.0 again.
    go to This Thread for latest CyanogenMod ROM

    THE ONLY RULE ON CYANOGENMOD: YOU DONT ASK FOR ETA

    Current status:

    Working:
    • RIL
    • ext4 on all internal partition
    • Audio
    • capasitive key & back light
    • Proxomity sensor
    • Microphone
    • Root & Busybox
    • Setup wizard
    • included gapps
    • autorotate
    • packet data
    • GPRS &EDGE (2G)
    • HSDPA & UMTS (3G)
    • Call, sms & mms
    • GPS
    • Swap support
    • usb mass storage
    • headset button. so u can play/pause music & goto next song from this button
    • Bluetooth
    • Wifi
    • FM Radio (Bluetooth must enabled)
    • Camera & Video record
    • Wired Tether using wiredtether.apk (see post & attachment on second post)
    • Access Point / Portable Hotspot
    • automatically configured APN
    • Hardware video acceleration
    • and more

    Not working:
    • ----

    Issue:
    • Backlight after set brightness
    • some option on setting
    • noise on FM radio

    if u find any bug, please tell us

    I am not responsible for any damage to your phone
    please read carefully how to install

    How to Install
    Code:
    - Download & flash px-cwm-v2.zip from recovery or cwm recovery
    - Reboot to cwm recovery again
    - Download & flash px-cm7-RC-3.0.zip from cwm recovery
    - Reboot your phone
    - Its not recomennded to use live walpaper, u should use static walpaper. since live walpaper will make your device hot & drain more battery
    - Since this version is not include gapps & a2sd, u should read gapps & s2e section!
    - for alternative a2sd, u also can use link2sd or mad2sd


    How Install google apps (gapps):
    Code:
    - Download it from here: http://wiki.cyanogenmod.com/index.php?title=Latest_Version/Google_Apps
    - Download latest version for cyanogenMod 7
    - Flash it from cwm recovery

    How to Install & Enable Simple2Ext (S2E):
    Code:
    - install it from market. be sure u've install gapps before!
    - open s2e, and press menu and choose setting
    - checklist the advance mode, extended partitions info, mount as ext4
    - u also can set read buffer. i'm using 3Mb
    - press back, and press menu -> reboot
    - if your phone not automatic reboot, u should reboot it manually
    - after reboot, open s2e again. u can check whatever u want
    - i'm check it all, except Application data (Application data = a2sd extream datasd)
    - reboot again
    - u need to modified 02gio. see this post http://xdaforums.com/showpost.php?p=19792902&postcount=705
    
    have problem cant checklist application, dalvik-cache, private-apps application-data on s2e after checked mount as ext4 and reboot?
    you must format your second partition using computer as ext4
    u can use gparted (linux) or minitool partition wizard (windows)

    How Enable a2sd:
    Code:
    - goto terminal emulator
    - write:
      su
      a2sd zipalign
      a2sd cachesdreset
    
    and:
    
    if u want use a2sd extream (move data to sd-ext):
    a2sd datasd

    ------------------------------------------------------------------------------------------------
    ------------------------------------------------------------------------------------------------

    Additional Feature from member & developer
    • Randomboot animation & market v 2.3.6 by squadzone -> here
    • Stock samsung keyboard on cm7 by belyava -> Here
    • Transparent Touchwiz (samsung home) by shiftyHungary -> here

    Source: https://github.com/phiexz

    please help us to develop this rom, and tell us if you found another bugs
    44
    Changelog & Download link

    Changelog

    New CWM v2
    ufxqbatj.gif

    special thx to ZimniY
    • fix error mount command
    • remove rfs support

    New RC 3.0
    ufxqbatj.gif

    • new build (new feature like: can change network preferences, minimal ring lockscreen, etc)
    • include all fix
    • removed a2sd (better use s2e than a2sd)
    • removed gapps
    • removed no-frills (use cm-setting to change cpu min max & governor)
    • smoother
    • better ram management (kernel patch)
    • fix cm-setting for change min & max cpu frequency (kernel patch)
    • revert backlight. sometime led cant off after set brightness. restart to make it normal again
    • update default governor to: ondemand min:245Mhz max:787Mhz
    • and more
    note: this version is not coming with google apps, u should download & install it manually
    note: this version is not coming with preinstalled a2sd DarkTremor. better to use s2e a.k.a simple 2 ext. download it from market!

    New RC 2.0
    • Fixed Access Point / Portable Hotspot now u dont need 3rd application
    • modified many library, thx to squadzone
    • reduce noise when listen FM-Radio
    • Fixed new market for Force Close. now u can use new market
    • change a2sd mountpoint from /system/sd to /sd-ext
    • trying to patch backlight again, please check & report!
    • Change dafault cpu clock & governor to: min:245 max:787 gov: interactiveX
      if you dont like this governor, try to change with no-Frills application

    - New Patch 2.2
    • fixed camera orientation on cm7 camera application (thanks to demon-e398)
    • fixed automatic APN setting
      goto setting -> wifi&network -> mobile network ->access point name - press menu button & tap to Reset to default
    • Deleted wiredtether.apk from /system/app
      you should install it as usual don't push to /system/app, download it from attachment below
    • kernel updatet (cf-root release 5)
      • Busybox upgraded from 1.17-> 1.19-CM71-bionic
      • Latest Superuser.apk & su binary

    - New Patch fix-2, Camera & backlight fixed & added new boot script
    thx to galaxy gio cummunity @ facebook for camera, waqasshahzad1986 for backlight issue fix & squadzone for boot script
    - New Patch fix-1, it should fix a2sd DarkTremor, bluetooth, wifi & FM-Radio
    - New Kernel px-cm7-kernel+cfroot-release-3.2 fixed backlight issue, sometime backlight still on even screen in locked
    - First version Relase (beta)


    Download Link

    ClockWorkMod Recovery 5.x
    Based on particle's CWM Recovery, only add ext4 support for system, data & cache
    px-cwm-v2.zip Download here [New]
    px-cwm.zip]Download Here [outdated]

    CyanogenMod 7.1 for Galaxy GIO
    cyanogenMod 7.1 RC 3.0 Download Here [New]
    cyanogenMod 7.1 RC 2.0 Download Here [outdated]
    First release, Download Here [outdated]

    Addons & Patchl
    px-cm7-addons-fix-2.2 Download Here [outdated]
    px-cm7-addons-fix-1 Download Here [outdated]

    -------------------------------------------------------------------------------------------------------------------------------------
    -------------------------------------------------------------------------------------------------------------------------------------
    Alternatiive kernel
    It's outdated... please dont use this kernel. new kernel is included on addons

    we use alternative kernel, it's based on SGA & SGS CF-Root Kernel. because we have a problem on CM7 initramfs kernel on our device. maybe it'll fixed soon.
    tempoary, use this kernel to make your phone bootup

    px-cm7-kernel+cfroot-release-3.2 Download Here [outdated]
    px-cm7-kernel+cfroot-release-3.1 Download Here [outdated]
    31
    Some screen shoot

    a.png
    b.png
    c.png
    screenshot-1316916780035.png
    screenshot-1319834936131.png
    screenshot-1320715063619.png
    screenshot-1320720104030.png
    screenshot-1320720129836.png
    29
    special thx

    special thx to:
    Hyriand for kernel source & CWM
    squadzone i port this rom with him :D
    Chainfire and ketut.kumajaya for CF-Root kernel, i'm ported theirs kernel
    Grif_07 and BehradGH and tj_style for their cyanogenMod 7, some lib & file based on their work
    13
    Here for activate bootsound and random bootanimation ( port from Emanon ( galmin ) thanks to Parasmi )

    randombootanimation_sound

    how to random bootanimation work

    1. Flash file above using CWM ( mount system first )
    2. Create Bootanimation folder into your sdcard
    3. if you have 3 files bootanimation.zip, rename each file like bootanimation1.zip, bootanimation2.zip, and bootanimation3.zip ( and do this for every file bootanimation.zip ( max 255 files )
    4, put all bootanimation.zip that you has been renamed before into bootanimation folder
    5. try to reboot and you will see different bootanimation every reboot :)


    download this 2 files, put on init.d folder and set permission to rwxrwxrwx
    ext4tuneup
    mountcache
    now you can download app from market that higher than 20mb :)


    for market problem
    market 2.3.6
    flash via CWM ( mount system first ) and your market will not updated again :)



    ANYONE PLEASE TRY THIS FOR CAMERA
    CAMERA FIX

    flash via CWM, do mount system first

    try to use Camera360, or LGcamera or MIUIcamera