Help HD2

---

Is there anyone willing to help me about instaling NAND android ?

Specific this one
http://forum.xda-developers.com/showpost.php?p=18313782
.
I have HSPL4 and thats everything i know. If there is anyone willing to help me step by step i would apreciate it cause i fail everytime I try. Thanks

The steps are on the first post of that page:

MAGLDR Install Manual:
•Download archive with the MAGLDR loader and Recovery from here than unpack its content.
•Connect PDA in bootloader mode ("mattress") and run LeoAdvancedRUU.exe from MAGLDR folder
•Wait for PDA reboot and clamp a key "Power". Connect PDA with cable to PC
•Install the driver if the PC doesn't see a PDA connected (download from here)
•Wait for PDA reboot and get to the MAGLDR menu . Choose point “USB Flasher” by arrows and press the call button "Green button"
•Run DAF.exe from MAGLDR_Recovery folder
•Wait for PDA reboot and get to the MAGLDR menu . Choose point “AD Recovery” by arrows and press the call button "Green button"
•Choose point "Install zip from sdcard" by arrows and next "Choose zip from sdcard", choose our archive with firmware (the firmware should be thrown preliminary on a sdcard) and press a call button "Green button"
•After the installation finishes get to the menu again. Press a key "Back" and choose point "Reboot system now".
•The PDA will reboot and the Android will be started. The first start a bit longer then usual

If you've already installed Magldr and recovery, then all you have to do is get the .zip for your Android build onto your SD card and then follow the rest of the steps above to install zip from sdcard.

It's a remarkably easy process.

I enter boot mode pressing down when powering ? will there be any problem cause i have HSPL4. Friend told me its not possible to do with HSPL4

I did the thing with advanced leo ruu and now its stuck on white HTC screen on power on :S

When you get to tri-color screen, does it list HSPL as 2.08?

Originally Posted by anseio

When you get to tri-color screen, does it list HSPL as 2.08?

It says SPL-3.03.HSPL. Do u have skype or something i really need to fix it tonight

Adittion : I am trying to flash factory Win now downloaded from HTC site. Hope it helps

Originally Posted by Cjovecje!

It says SPL-3.03.HSPL. Do u have skype or something i really need to fix it tonight

Adittion : I am trying to flash factory Win now downloaded from HTC site. Hope it helps

Reflashing factory ROM won't change HSPL. A quick search shows that you need to go back to stock SPL, then up to HSPL 2.08

http://forum.xda-developers.com/showthread.php?t=611433
4) Uninstallation
Only way to remove the HSPL is to flash an original SPL from SD card.
- Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button.

That thread is actually a good place to post your problem, since it's still quite active and SPL/HSPL are in the way of you getting things flashed correctly.

It's possible to flash HPL 2.08 without uninstalling 3.03.

I've already tried it without any problem

Do u have skype msn or any familirar stuff ? I would like to have u online when I try to do that ?

Sorry, I don't have any hands-on experience with what you need to do. I only know the concept. :\