picked up the atrix 2 car dock at at&t for $40

---

ok, was bummed to find out that both my car chargers didn't work with the atrix 2, so i picked up the car dock today at the at&t store for $40. i'll preface this with the fact that this dock is $99 at motorola, $59 from amazon, but only $40 from at&t.

this is probably the best accessory purchase i have ever made for any device i have ever owned, lol. seriously. it's well constructed, sticks firmly to the windshield (can also mount to dash), the dc plug has 2 ports on it, the usb cable also carries audio and has a 3.5mm jack plug, the dock can accommodate a small case, the usb plug on the dock can be removed and flipped for the 4g and it charges, lol

some pics i took of it tonight








for $40, you can't go wrong. at&t wanted $30 for one of the generic dc plug with a coiled cable things, so for $10 more and 60% less than what motorola wanted and $20 cheaper than amazon, i couldn't pass on the deal.

if you're looking for a car charger or vehicle mount solution, pick this up before at&t realizes their price point is off, lol

You think it would work with the commuter case or not?

Hmm, I almost pulled the trigger but I've already got a gps that does all of that

Originally Posted by JRW 28

You think it would work with the commuter case or not?

not sure, if you look at this pic


you can see the insert used to fit a phone without a case, if the commuter is about that thick, then it should work

I have the commuter case and it doesnt work with the hard shell but you can easily put it in there with the silicone case still on it not too much of an inconvenience only takes me about 10 secs to get off the case and put it back on.

I picked mine up today and It works with the Red speck case they sell. its a nice fit too. Im going to look at the multimedia dock and see if it also fits with the speck case.

I've asked this in another thread, so I'm sorry if I'm coming across as annoying...

Can someone who has the car dock and a multi-meter check the resistance value between the usb pins (specifically between pins 4 & 5)? I've made my own dock (I realize I could have bought the dock, but I like making things like this, and I think it turned out fairly nice) but it's still missing the audio out through the usb. I'm still working off the assumption that the car dock mode is triggered via a specific resistor value on the ID pin and the audio out is with pins 2 & 3 (pin 5 is the common ground).

Again, sorry for bringing this up again in another thread, but I still haven't gotten anyone to make the measurement yet.

Thanks!