[REF] How to remove yellow triangle on any firmware with JIG

---

100% works for all Gingerbread, ICS and JellyBean ROMs TouchWiz Stock/Custom and AOSP/AOKP.
Works with new ICS and JB (4.0.3, 4.0.4, 4.1.1 and 4.1.2) ROMs
Italian translate by Willy89

1) You need a JIG. You can buy it or create its own
2) Download attached zip archive and extract it to some folder
3) Reboot you device in download mode - turn it off, than hold volume down + center button + power button. Wait for the warning message and press volume up
4) Plug it to you PC
5) Start Odin from extracted folder and choose '1.tar' file for PDA flash. You must get the same settings:

6) Press Start and wait for the completion of the flashing
7) After reboot you should get black and dead screen. Unplug USB from PC. Long press power button (15-20 seconds). Remove battery for 5 seconds, plug in JIG, put battery back. Wait for 40 seconds, press power button for 5 seconds, remove JIG, long press power button (15-20 seconds), remove battery
8) Put battery back, hold volume down + center button + power button for 10-15 seconds, press volume up, plug it to you PC
9)

If you have GingerBread ROM TW stock/custom (Android 2.3.X) or any ICS and JB AOSP/AOKP (MIUI, Cyanogen, Paranoid and others) your step is:
Start Odin from extracted folder and choose '2.tar' file for PDA flash

If you have TW stock/custom ICS/JB ROM (Android 4.0.3, 4.0.4, 4.1.1, 4.1.2) your step is:
Start Odin from extracted folder and choose '2-ZSLPF.tar' file for BOOTLOADER flash

10) Press Start and wait for the completion of the flashing

At points 7-10 the screen will not work!

After these steps you will get:
- No yellow triangle
- Custom binary download value will set to 'NO'
- Current binary value will set to 'SAMSUNG OFFICIAL'

FAQ

Will it work for new stock gingerbread, ics, custom, cyanogen, miui and other firmware?
All gingerbread ROMs and ICS except CLP5 and CLP6 (some users report about incompatibility). Better don't use this reset counter instruction if you have those ICS ROMs.

Do I need root for this?
No.

Does not work, yellow triangle is not disappeared!
Carefully follow all 10 points of instruction.

I am having trouble, black screen after a 10th point!
Try reboot your device. Remove battery for 10 seconds and plug it back.

Odin can't recognize USB plug at 4 or 8 point. + Windows can't detect device or identifies as "Unknown device".
Try another USB port. Try reinstall kies or remove it and install only galaxy note drivers (link1, link2). If not helped try another PC.

Will this work on the Galaxy S2 or Galaxy Nexus?
No! You will break your phone. Works and tested for GT-N7000 and GT-I9220.

Will this work on the SGH-I717 (AT&T)?
Not tested yet.

Will I have a problem with a warranty? Can they identify the use of this counter reset?
There is absolutely no chance to detect this binary reset at service center.

Does it clear counter as well ?

Originally Posted by ludwiglaisne

Does it clear counter as well ?

Yes, mine at zero with custom firmware.

hi,
why in the zip there 2 files ?
1.tar
2.tar
tks for reply mate

does that mean we can keep our gnote in warranty?

Originally Posted by jonata

hi,
why in the zip there 2 files ?
1.tar
2.tar
tks for reply mate

Please read my instruction in first post carefully

Originally Posted by Delux9364

does that mean we can keep our gnote in warranty?

Yes!

Why is it so troublesome? I thought it is exactly same as Galaxy S2...just plug in the usb jig when the phone is off, then it will boot to download mode, and reset the binary counter + remove triangle....

Originally Posted by ck_looi

Why is it so troublesome? I thought it is exactly same as Galaxy S2...just plug in the usb jig when the phone is off, then it will boot to download mode, and reset the binary counter + remove triangle....

Probabily you have a old bootloader in your gs2, because with new bootloader appened same problem like GNote

Inviato dal mio GT-N7000 usando Tapatalk

Originally Posted by alesscam

Probabily you have a old bootloader in your gs2, because with new bootloader appened same problem like GNote

Inviato dal mio GT-N7000 usando Tapatalk

Yes, this why we have to flash first the old sgs2 bootloader as discussed many times in other threads

The yellow triangle has gone...