Originally Posted by sblop

I simply can't make windows see the device. It pops up, but won't even accept the drivers when I force the correct drivers. :-/

This can be windows problem, but also can be because you flash PDA, not BOOTLOADER. Try to remove battery, than back. And press power button for 5 seconds. Wait till android boot and connect usb. MTP connection works? Do you see the N7000 icon with Internal and External memory at your computer?

Originally Posted by anonymous572

This can be windows problem, but also can be because you flash PDA, not BOOTLOADER. Try to remove battery, than back. And press power button for 5 seconds. Wait till android boot and connect usb. MTP connection works? Do you see the N7000 icon with Internal and External memory at your computer?

When I start the device "normally" I get boot sound. Then when I connect the cable it installs the driver for mobile modem and the composite device. Both succesfully.
MTB driver install fails, even though it has the correct driver. It can't start the connection, windows writes.

Originally Posted by sblop

When I start the device "normally" I get boot sound. Then when I connect the cable it installs the driver for mobile modem and the composite device. Both succesfully.
MTB driver install fails, even though it has the correct driver. It can't start the connection, windows writes.

Try another PC, if you have the same results - you have only one way. Try to install '2-ZSLPF.tar' with mobileodin. You can try doing screenshots with POWER+CENTER buttons and see at /sdcard/pictures/screenshots/ where you are now, than step by step install/start mobile odin and flash this 2-ZSLPF.tar. But how to see screenshots folder without MTP connection - this is a question. You can also try to start somehow Kies Air, if you do - you can view screenshot folder from PC.

Originally Posted by anonymous572

Try another PC, if you have the same results - you have only one way. Try to install '2-ZSLPF.tar' with mobileodin. You can try doing screenshots with POWER+CENTER buttons and see at /sdcard/pictures/screenshots/ where you are now, than step by step install/start mobile odin and flash this 2-ZSLPF.tar. But how to see screenshots folder without MTP connection - this is a question. You can also try to start somehow Kies Air, if you do - you can view screenshot folder from PC.

Thanks for the advice. I will try this tomorrow. Damit, I did not see the instructions were diffrent for the LPF file. Thanks for your advice.

Originally Posted by anonymous572

Try another PC, if you have the same results - you have only one way. Try to install '2-ZSLPF.tar' with mobileodin. You can try doing screenshots with POWER+CENTER buttons and see at /sdcard/pictures/screenshots/ where you are now, than step by step install/start mobile odin and flash this 2-ZSLPF.tar. But how to see screenshots folder without MTP connection - this is a question. You can also try to start somehow Kies Air, if you do - you can view screenshot folder from PC.

I called a friend who brought his computer, and this solved the problem. Thanks for the help!

I'm using the following on my Note:

XXLPY Rom
ZSLPF Bootloader, Kernel and Radio

As I have the LPF bootloader, I assume I should follow the instructions for ZSLPF?

Thanks for any advice!

Originally Posted by battletank

I'm using the following on my Note:

XXLPY Rom
ZSLPF Bootloader, Kernel and Radio

As I have the LPF bootloader, I assume I should follow the instructions for ZSLPF?

Thanks for any advice!

yes follow the instructions in the OP just make sure when you flash the 2.tar file that you flash is in odin as a bootloader not in the pda, it wont hurt I dont think if you did it just wouldnt do what its supposed to do until you did. It worked like a charm on mine...

Originally Posted by bkeaver

yes follow the instructions in the OP just make sure when you flash the 2.tar file that you flash is in odin as a bootloader not in the pda, it wont hurt I dont think if you did it just wouldnt do what its supposed to do until you did. It worked like a charm on mine...

Not 2.tar!!! Please look carefully at first post. If your bootloader ZSLPF you need this tar to flash 2-ZSLPF.tar.

Originally Posted by anonymous572

Not 2.tar!!! Please look carefully at first post. If your bootloader ZSLPF you need this tar to flash 2-ZSLPF.tar.

I hate to tell you this but I did use the 2.tar file and I was on LPF and it removed and reset my counter!

Originally Posted by bkeaver

I hate to tell you this but I did use the 2.tar file and I was on LPF and it removed and reset my counter!

If you did it, now you have old gingerbread\betaics bootloader.