Originally Posted by brofaris

it's ok...but can SE fixed my phone??

If you have warrianty,and your phone died i think that they cannot gather information about that was it rooted,or with unlocked bootloader etc...because your phone is dead.just tell them that yku didnt mod anything that it was as it came.

Sent from my E15i using xda premium

good idea...

how to relock your phone when its bricked?? my phone is not even respondin no screen no nothing !

Originally Posted by tohno

how to relock your phone when its bricked?? my phone is not even respondin no screen no nothing !

Try the flashmode. When it's working, the key is in your hands to unbrick the phone. Flash a kernel and then a ROM to get it work or just flash back stock kernel and relock BL with s1tool 2.

Good luck!

Greetings from Hungary

Ok, I need someone's help. My phones is bricked I cannot connect to SE1Tool and I cannot Fastboot because there are no links of working roms in .ftf. Can somebody upload a stock rom in .ftf?

E: Ok, I've created a .ftf file myself.

Originally Posted by Superuser.Angga

Intro
I know there are a thread with specific with this thread
but this thread will be much solution

Old Link (Graveir) = Xda

Warning: There are Soft Brick/Hard Please Be carefull with flashing and unlocking.

Soft Brick:
For NoObs said "bootloop"
this is a soft brick and easy to be fixed

Solution:
Xrecovery:
Use Backup (If you Did This) This is the easy way

FlashTool:
Flashtool is a software developed for Xperia X10, It Supported On X8

Tutorial:
1. Download latest version from this thread: Xda

2. ROM Image, Contain Russia and Generic :
2.1.1.A.0.6 Generic
Russia 2.1

3. Baseband Collection (Blagus) Many Custom Rom Use M76XX-TSNCJOLYM-53404015 which mean its xxx15 use it in this blagus folder
Mediafire

4. Place ftf file in /firmwares directory of your flashtool.

5. Install drivers from /drivers directory

6. Prepare yourself - plug the USB cable to the computer and launch flasher.

7. Click "flash", choose your ROM from the list, Wait for instructions.

8. When the instruction pops up, press and hold "back" button on your X8 and plug the cable into it. Keep holding untill you see that flashing of files has begun, then you may release it.

9. Flashing will take a while, you may observe the progress on a bottom bar. When it's finished you will be asked to plug off your device and reboot it.

10. If you wish to change baseband, clean firmware directory in flashtool and place baseband ftf file in it, then go through flashing procedure again.

11. If you try this correctly your phone will work again

Hard Brick:
Device Not power up, Xrecovery/CWM not working, Extreme Brick

Solution:
This instructions are software related only not for hardware

Seus/PCC:
This is easiest way to unbrick your x8
PCC:SonyEricsson
Seus: Seus is outdated and not continued

Instruction:
1. Click Support zone
2. Click Phone update (Don't connect your phone)
3. Click "repair phone"
4. Follow onscreen instruction
5. Done,Enjoy

FlashTool:
Flashtool is a software developed for Xperia X10, It Supported On X8

Tutorial:
1. Download latest version from this thread: Xda

2. ROM Image, Contain Russia and Generic :
2.1.1.A.0.6 Generic
Russia 2.1

3. Baseband Collection (Blagus) Many Custom Rom Use M76XX-TSNCJOLYM-53404015 which mean its xxx15 use it in this blagus folder
Mediafire

4. Place ftf file in /firmwares directory of your flashtool.

5. Install drivers from /drivers directory

6. Prepare yourself - plug the USB cable to the computer and launch flasher.

7. Click "flash", choose your ROM from the list, Wait for instructions.

8. When the instruction pops up, press and hold "back" button on your X8 and plug the cable into it. Keep holding untill you see that flashing of files has begun, then you may release it.

9. Flashing will take a while, you may observe the progress on a bottom bar. When it's finished you will be asked to plug off your device and reboot it.

10. If you wish to change baseband, clean firmware directory in flashtool and place baseband ftf file in it, then go through flashing procedure again.

11. If you try this correctly your phone will work again

Coma Brick:
Device wont power on at all or respond to button input
Don't worry ok

Solution:
Charge your phone with main supply (not usb) let it charge fully 4 hours
It will start again. Battery big icon will appear around 30% battery charged
Let it full or boot up

Loader Brick:
This because of false instruction of unlocking bootloader or flashing kernel

Solution:

Relock, PCCompanion
A. Relock your bootloader
B. Use PCC to restore your phone
Instruction For PCC :
1. Click Support zone
2. Click Phone update (Don't connect your phone)
3. Click "repair phone"
4. Follow onscreen instruction
5. Done

plz fix links

<3<3<3<3I Love You So Much!!!!!!!!!!!!!!!!!!!!!!!! <3<3<3<3

Coma Brick:
Device wont power on at all or respond to button input
Don't worry ok

Solution:
Charge your phone with main supply (not usb) let it charge fully 4 hours
It will start again. Battery big icon will appear around 30% battery charged
Let it full or boot up

Loader Brick:
This because of false instruction of unlocking bootloader or flashing kernel

Solution:

Relock, PCCompanion
A. Relock your bootloader
B. Use PCC to restore your phone
Instruction For PCC :
1. Click Support zone
2. Click Phone update (Don't connect your phone)
3. Click "repair phone"
4. Follow onscreen instruction
5. Done

YES..I Have accidently bricked dead X8,Acually im trying to install a CWM but then..BOOM the phone wont turn it on again..Does the charged method really works?I did charge it for atleast 6 hours more but still NO ICON reveal there..what now?Please help.Thanks..

I need the ROM image. The link does not work. Help!

x8 bricked

---

i bricked my x8 i now it does not want to turn on or enter to cwm recovery or charging , i try steps for hard brick but these steps doesnt work for me if anybody have solution please write i have this phone only 8 months ...