[ROM][STOCK]SHW-M380W Korean Tab 10.1

---

As I make progress towards making us an overclocked kernel I will keep m380w users informed in this thread. Wish me luck!

June 16, 2012 Had to post an updated torrent file.
May 01, 2012 New Firmware Released (NOT ICS)

Attached is a torrent file for FD19


Dec. 08, 2011 Development Halted
Here's the latest. The source code that Samsung makes available seems to have issues. I have tried and tried again to reproduce a stock kernel that will boot with the initramfs. However, the defconfig provided does not match the .config extracted from config.gz. There are some big differences between the two. The defconfig supplied with the source code defines the board as p4 yet the .config from the kernel defines it as p4wifi. So naturally I have tried both and I have tried many, many other things. All for not.

I contacted FOSS and the response was to the tune of, "We sent your message to the dev. team. If they respond, we'll respond. Until then, just wait."

With that said, I see no reason to muck about with trying to make an overclocked kernel, when there is no indication that I have valid source code.

Nov. 24, 2011
Here is a stock ROM of EK10, released 11/23/2011 for those who need or want it.
SHW-M380W.EK10.7z

Rooting directions and files I have tested and do work with this release can be found here on XDA

Nov. 26, 2011
I made some progress and have extracted the initramfs from the EK10 kernel using koush's AnyKernel. See attachments. One step closer to an overclocked kernel.

Pershoot has graciously offered his time and resources and built a recovery cwm_5.0.2.7_kor for the m380w. Which now displays correctly on this device.
He included the following notes:

UMS is not implemented (so the option will not work).
no radio/extra partitions will be available.

Originally Posted by koe1974

As there are only a few of us in here and nobody in Korea seems to be developing this model, I took it upon myself to retain this ROM from my most recent bout with Kies.

Here is a stock ROM of EK10, released 11/23/2011 for those who need or want it.
HOME_SHW-M380W.EK10.1207_CL583812_REV00_user_ship.tar.md5

Rooting directions and files I have tested and do work with this release can be found here on XDA

I hope to offer an overclocked kernel in the near future but we'll have to see.

Can you give a few more details?
Is it HoneyComb 3.2?
Is it for WiFi or 3G tablets?

Originally Posted by BeeGee_Tokyo

Can you give a few more details?
Is it HoneyComb 3.2?
Is it for WiFi or 3G tablets?

It is Honeycomb 3.2. The shw-m380w is a wifi model.

Sent from my SHW-M380W using xda premium

One of the most noticeable difference is the integrated digital dmb tv and radio receiver and antenna. With no change in the look and dimensions. It comes wifi with or without 3g.

Originally Posted by koe1974

Nov. 26, 2011

Pershoot has graciously offered his time and resources and built recovery-cwm_5.0.2.7-sam-tab-10.1_kor_odin.tar.zip
He included the following notes:

refreshed:
http://droidbasement.com/db-blog/?p=2439

Originally Posted by pershoot

refreshed:
http://droidbasement.com/db-blog/?p=2439

Excellent! Just completed a backup and all worked as expected.

Thanks

Sent from my SHW-M380W using xda premium

Thank you so much pershoot and Koe1974. Now, CWM can operate normally with my device. Actually, my device model is shw-m380s with 3g and I would like to ask you is it able to upgrade by CWM with the custom roms of P7500 (as overcome rom) and the overclock kernel?

Hi pershoot. I've just made a backup for my kor tab (model shw-m380s). Please help me to check the boot.img attached and let me know my device is able to apply your kernel or not. Thank you in advance.

Your device is not compatible with my kernel.

Originally Posted by pershoot

Your device is not compatible with my kernel.

Thank for your reply Pershoot. Yesterday, I tried to patch your kernel and my tab couldn't boot, so I had to back to its stock kernel. I also upgraded my tab to Overcome Rom with stock kernel and it works fine exclude one issue is the brightness level couldn't adjust anymore. Because I am not good at hex and linux coding, so I appreciate if you or other developers could help me (and people own this device) to fix my stock kernel to make it is suitable with CWM roms and able to be overclocked. Thanks alot in advance.