[MOD]X2 Mash-Up v3 [CM7] v1 [CM9] v6 [2.3.5 OTA] (5/31/12)

---

X2 Build.prop Mash-Up

This build.prop is a mash-up between navenedrob & knzo's build.prop settings. These tweaks have been optimized to allow max performance, while maintaining good battery health.

What this build.prop does:
Tweaks 3G speeds
Dalvik Improvements
Signal Improvements
Tweaks picture/video settings
Improve Wifi speeds
And a bunch of other stuff.....

Should work with all roms, but results may vary.

**Use at your own risk**

Credits:
Navenedrob
Knzo

See Post #2 for download and install instructions.

Installation:

- Make sure WiFi is turned off before flashing
- Boot into BSR
- Wipe Cache & Dalvik
- Flash zip
- Enjoy

***If your running CM7/CM9 use the modified bootstrap Dragonzkiller created found here.***

If you want to go back to stock follow the same instructions just flash the stock zip.

If you are interested in increasing touchpoints to 8 you can visit MoonShadow - NM's thread. Use at your own risk.
http://forum.xda-developers.com/showthread.php?t=1454750

CyanogenMod 9

X2-MashUp.CM9v1.zip

X2-Stock.CM9.zip

CyanogenMod 7

X2-MashUp.CM7v3.zip

X2-MashUp.CM7v2.zip

X2-MashUp.CM7v1.zip

X2-Stock.CM7.zip

Stock Rom/Blur Based roms (eg Eclipse)

X2-MashUp.v7(2.3.5).zip

X2-MashUp.v6(2.3.5).zip

X2-Stock(2.3.5).zip

Version History
CM9 1.0
Initial Build.prop

CM7 3.0
Changed Net speed values (Kept the 3G tweaks the same as v2 since the testbuild was performing worse with the new changes)
Added battery/faster scrolling/prevent application issue tweaks
Tweaked some other settings (dalvikvm, maxwindows, wifi)

CM7 2.0
Support CM7 RC1
Added few edits from stock build.prop

CM7 1.0
Updated build.prop to support CM7 RC0
Removed App & Memory management settings (Not needed since CM7 is fast already)
Support for MoonShadow - NM touch point mod (you still need to flash his zip)

(2.3.5) .7
Changed Net speed values
Added battery/faster scrolling/prevent application issue tweaks
Tweaked some other settings (dalvikvm, maxwindows, wifi)


.6
Updated build id's
Added few edits from stock build.prop

.5b
Changed Wifi scan to 160 seconds
Changed power collapse back to 0 (did this by mistake on v.5)
Changed max window events to 200 (seems a bit smoother)

.5
Another WiFi Fix
HDMI Fix

.4b
Fixed WiFi
Added 2.3.5 build.prop (Thanks CadenH for the orginal build.prop file from ota)

.4
Fixed Market issue

.3
Added battery tweak
Removed pulldown text but left setting in to allow customization (Liberty users can still set this thru Liberty settings)
Removed Debugging icon from notification bar while in use

.2
Changed Multitouch value to 5
Added pulldown text (Note: If you have liberty, you can change  pulldown text under Liberty Settings->Pulldown Text, otherwise you  can change directly in the build.prop with text editor)
Corrections

.1 
Initial Release

Works great! 2.5 MB download on 3G! Thanks for the mod, will be testing on the other ROMs I have nandroided

Sent from my DROID X2 using XDA App

love to know if it worked on eclipse.

Nice job. Before 2 megabit down and after 2.5 megabit down. Phone seems snappier too.

would this work in conjunction with the speedy scripts or are you supposed to use only one at a time?

I have it with speedy scripts and it seems faster with scripts, smoother with prop file, then faster AND smoother with both!

Sent from my DROID X2 using XDA App

Originally Posted by L2_n19h7m4r3

Nice job. Before 2 megabit down and after 2.5 megabit down. Phone seems snappier too.

The most I can ever get down is 200 kbps bit I live in a rural area. What setup did you have pre build prop in this thread to get that kind of speed?


Sent from my DROID X2 using XDA App

Liberty ROM, Throttle mod, and since yesterday speedy scripts v7.

DOES work on Molten. Messes up 3G on Eclipse. But works great without molten and libetry
Haven't tried the latest liberty actually, didn't see the new one haha

Sent from my DROID X2 using XDA App