[KERNEL] Modified Stock Kernel [init.d/bootanimation]

---

Hey Guys,
here is the stock kernel from XXKQ7 including init.d and custom bootanimation support.

Root and Busybox needed

HOW-TO

1. Download one of the following zips
2. Put the zip on your internal SDCard
3. Shut down your phone
4. Go into Recovery-Mode: First power off your Phone, then hold Power + VolumeUp. Release the two buttons 3 seconds after the samsung logo is shown.
5. "install zip from sdcard" -> "choose zip from internal sdcard" -> "stockkernel_init.d_bootanimation_KQ7"
6. Reboot your phone


Downloads

KQE Kernel

KQB Kernel

KQ7 Kernel


Further Instructions

1. Create /system/etc/init.d place some script in it or flash any other init.d script package

2. To change the bootanimation place your favorited sanim.zip in /system/media/



After that you can flash Thunderbolt or AdrenalineShot and use their advantages.

Please give some Feedback it is working correctly because im really new to this stuff. I have a GT-I9001 and at the moment everything seems to run as it should. I had no bootloops as it sometimes was the case with FeaMod or N00b.

what’s this kernel‘s CPU frequency ，OC?

Why you are concerned?

Sent from my GT-I9001 using XDA App

Originally Posted by crybert

Why you are concerned?

Sent from my GT-I9001 using XDA App

sorry, some mistakes in front of my words

Nice, been looking all over for stock kernel..How its prforming? Im currently on latest feacore, with batt drain all the time. Can u post ur batt stats pic?Would love to have usable phone than some short lived super fast phone..

Nice man......thansk is ok on my phone.

can i use it on another phone???

Originally Posted by safwanjin

can i use it on another phone???

u can't be serious , right ?

Originally Posted by safwanjin

can i use it on another phone???

I'm soooo tempted to say yes... but dude, the answer really is NO WAY MAN (unless you want a device which can only be used for throwing in your neighbors windows)

For the ones that want to automate uploading boot.img, here's a batchfile (untested). Just use attached, drag your boot.img ontop of it and ready it is...

for %%i in (%1) do set onlyfilename=%%~nxi
adb push %1 /sdcard/%onlyfilename%

adb -d remount
adb -d shell dd if=/sdcard/boot.img of=/dev/block/mmcblk0p8
adb -d remount

echo all ok? 
echo rebooting...press a key to continue...
pause >nul

adb -d reboot
pause

Originally Posted by crybert

Hey Guys,
I cooked this Kernel with dsixda's Android Kitchen because I wanted a stock kernel with init.d. So here it is.

Root and Busybox needed.


How-To with TerminalEmulator
1. Download boot.img here
2. Place boot.img on your SD-Card
3. Download TerminalEmulator from Market: https://market.android.com/details?i...al.androidterm
4. Run TerminalEmulator and type:

su
dd if=/sdcard/boot.img of=/dev/block/mmcblk0p8
reboot

How-To with adb
1. Download boot.img here
2. Place boot.img on your SD-Card
3. Connect your Phone to your PC with the USB-cable (USB-Debugging has to be enabled)
4. Download adb-tools on your PC and extract the files to C:/adb
5. Run cmd on your PC and type

cd c:/adb
adb shell
su
dd if=/sdcard/boot.img of=/dev/block/mmcblk0p8
reboot

After that you can flash Thunderbolt or AdrenalineShot and use their advantages.

Please give some Feedback it is working correctly because im really new to this stuff. I have a GT-I9001 and at the moment everything seems to run as it should. I had no bootloops as it sometimes was the case with FeaMod or N00b.

hmm I can install this over your ROM ?