[KERNEL] 2.6.29.6-nAa-14 [23/8/12] Custom Gingerbread kernel + CWM Recovery

---

Search no more. This is THE kernel for your gingerbread x10mini pro.


Before unlocking your bootloader, read this thread
If you brick your device, you are the sole responsible.


Features:

• Based on stock 2.6.29 SE sources
• Upgraded to Linux kernel version: 2.6.29.6
• Ported various components from 2.6.35 / 38
• Significantly fast booting time (~25 secs from power button to lockscreen)
• CWM recovery 5.0.2.7 in kernel
• Netfilter support / AP support / Usb tethering
• Swap support
• Tun/Tap
• Mddi fix
• Ext3/4 support
• Modules auto-copying at boot
• Dual touch options:
  - Fake dual touch in kernel (thanks to andrej456) (default)
  - Modular fake dual touch in kernel (thanks to doixanh)
  - Modular no dual touch
• Many CPU freq governors to chooce from: interactive, interactivex, minmax, smartass, smartass2, scary and savagedzen
• Modular Undervolt
• NOOP ioscheduler
• TINY RCU
• DM_CRYPT_GLOBAL_WORKQUEUES
• Ramzswap for compcache
• Offline charging embedded in the kernel
• Stable and fast oveclocked frequencies (not enabled by default)
• Frequency table: 19MHz - 864MHz
• Default CPU governor: interactive
• Two way call recording (might be against the law for some countries, you are responsible for using this feature)
• Interface Stat support for ICS
• Memory management and binder improvements from gb kernel
• Many, many feature and stability patches from various kernel sources
• ICS DRM support

IMPORTANT:

• For wifi to work, the ROM MUST have Wifi built from sources as in CM. If this is not the case, the Wifi WONT work, DON'T compain here about that.
• For vibration, the ROMs need to use the gb implementation.

FAQ:
If you have any issues, please read the FAQ thread first: http://forum.xda-developers.com/show....php?t=1266911

Requirements:

• Unlocked bootloader --> http://forum.xda-developers.com/show....php?t=1254225
• MiniCM7 or any recent gingerbread-based ROM
• Flashtool tested to be working with your phone, e.g. from here: http://www.multiupload.com/GYL7A7XQBT Original flashtool thread: http://forum.xda-developers.com/showthread.php?t=920746

Install:

• Backup
• Unlock your bootloader as described here: http://forum.xda-developers.com/show...77&postcount=3 or here: http://forum.xda-developers.com/show....php?t=1254225
• Download the kernel ftf file from here and move it to Flashtool\firmwares so that Flashtool can pick it up
• Flash the kernel via Flashtool
• Reboot and check Settings -> About Phone:
  

Uninstall:

• Flash back to stock using Flashtool or SEUS.

Performance:


Sources:
The linux kernel is GPL'ed, everyone who does modifications should make them publicly available.
https://github.com/nobodyAtall/nAa-kernel

Credits: the_laser, FreeXperia and the rest of XDA devs who helped bypassing the bootloader!
DaRk_dOg for his awsome boot logo

Donate:
If you are enjoying my work please consider donating: .
Donations are voluntary but allow me to spend more time on this project.

Disclaimer:
I can't be held responsible if this Kernel bricks your device or makes it explode in your hands! Use it at your own risk!

nAa-14

• ICS DRM support

nAa-13

• CWM Recovery 5.0.2.8
• Fixed boot into recovery issues
• Latest gingerbread busybox and init
• Panic timeout set to 1sec for shakira

nAa-12

• Fixed touchscreen multitouch modules to load
• Kernel boot animation
• Memory improvements from ICS

nAa-11

• Proximity and Lightsensors report events as they should now
• Fix for robyn keypad
• CWM support for formatting sd-ext
• CWM for shakira is no longer ldpi

nAa-10

• msm/kgsl: Porting kgsl 1.1 from 2.6.35 gives a good performance boost for 2d/3d operations
• acpuclock: Improved overclocking from 2.6.35
• shakira: keyboard reset with HOME + POWER
• pmem: Porting pmem from 2.6.35
• Bugfixes and improvements: sha1, vfs_cache_pressure, net/ipv4, net sched, pid, mm/vmscan.c
• Module for disabling dual touch altogether
• Performance governor selected in recovery
• NOOP ioscheduler (faster for android)
• + 2MB More RAM (184MB in total)
• Cypress touchscreen fixes for notification bar pull up

nAa-09

• Updated CWM recovey to the latest version (5.0.2.7)
• Interactive governor selected in recovery
• Minor smartassv2 fixes

nAa-08

• Significantly faster booting time (~25 secs from power button to lockscreen)
• Less crasses regarding reboot
• Jhash improvements
• Two way call recording
• Modular dual touch based on dx's DT (replaces existing DT if insmoded)

nAa-07

• Offline charging
• Improved overclocking frequencies in kernel (no overclocking module needed for over 600MHz)
• Interface Stat support for ICS
• Sleep improvements for armv6
• Implemented WLOD on kernel panic

nAa-06

• Ported latest akm8973 sources to work for the mini

nAa-05b

• Usb mounting via CWM
• DDMS screen capture

nAa-05

• Updated USB drivers to semc GB sources
• New gb vibrator implementation
• Cpu frequency fixes
• Switched to fake dual touch from andrej456 (seems to be the best choice for the mini)
• CIFS and utf8 support
• CWM 5.0.2.3

nAa-04

• Update to Linux kernel 2.6.29.6
• NPARTS event support for disk devices
• All around Improvements and bug fixes in:
  BFQ, mutex adaptive spins, mm, irq, mmc, cpufreq, hrtimer, mtd, memcpy/memmove, yaffs
• Removed FPS uncap since it caused issues with scrolling and with some apps
• Gingerbread init/init.rc
• Boot logo
• Fixed ddms screen capture

nAa-03

• BFQ ioscheduler
• TINY RCU
• DM_CRYPT_GLOBAL_WORKQUEUES
• Removed FPS Cap
• Display power-off optimizations
• Droidwall support
• Memory management and binder improvements from gb kernel
• scary and savagedzen CPU governors
• Export scaling_available_frequencies attr in /sys
• Ramzswap support for compcache
• Many bug fixes and optimizations from upstream regarding:
• mm, cifs, sctp, timed_gpio, net sockets, tcp, fs: pipe.c, yaffs, ext4, dm-crypt, arm, sctp

nAa-02

• Ext3/4 support
• Modules auto-copying at boot
• Fake dual touch in kernel (doixahn's 007)
• CPU freq governors: interactive, interactivex, minmax, smartass, smartass2

nAa-01

• Netfilter / AP support (WiFi tethering)
• Swap support
• Tun/Tap in kernel
• Mddi fix in kernel
• Modular Overclock / Undervolt
• CWM recovery v4.0.1.5 in kernel

Reserved ..........

finally its here

EDIT
hey i found 2 bugs
1)vibration is not working for me
2)and wifi is giving me error on gintonic 2.5.1

Finally it has been released! thx nAa =D
im waiting for it very long lol...

Originally Posted by farazfaraz

finally its here

EDIT
hey i found 2 bugs
1)vibration is not working for me
2)and wifi is giving me error on gintonic 2.5.1

Please read the 'IMPORTANT' note in the 1st post.

Originally Posted by farazfaraz

finally its here

EDIT
hey i found 2 bugs
1)vibration is not working for me
2)and wifi is giving me error on gintonic 2.5.1

Same here, probably meaning gintonic hasn´t wifi built from sources. Which ROM has?

Edit: OK, I can see now: http://forum.xda-developers.com/show....php?t=1415026

minicm7pro v21 wifi not working! mean it doesnt have build in Wifi built from sources

Awsm.....Awsm....been waiting for this so long... Thanks

And ppl only Mini CM7-2.1.7 By Nobodyatall has Wifi Bilt from siurces...so Wifi works only woth MIni CM7-2.1.7


Am So happy

Thank you so much.