Originally Posted by pizz0wn3d

No. Putting a bus speed at 250mhz on that high of a freq would pretty much guarantee that 95% of users wouldn't be able to even apply the step without a reboot. Mine caps out at ~234mhz, and that's slightly above average.

Herp derp Captivate XDA Premium App.

I know it seems so unlikely. Trust me. Especially with how unstable such oc levels of such magnitude with live oc. I guess they found the sweet spot. But let's move on from that because I know its not like that here and I can't so easily achieve it. What values do work well for you?

Sent from my SGH-I897 using XDA

It just does not makes sense to me. Is it just because ICS is not as compatible? 1.5GHz/250mhz was flawless on GB. But with ICS its so different. I noticed with this much more stable Rom aokp and them using volt sets from Glitch 13 I got better oc, but after a while of 1ghz and 120% working fine it will freeze up. Even 110% from 1ghz froze after a bit.

Sent from my SGH-I897 using XDA

I'm on LBR 1.1.1 Infinitum. Was on glitch kernel when the problems started.
The BLN feature was working great until I started experimenting with under-volting the CPU and internal voltage with NStools.

I noticed that the BLN stopped working, but figured that maybe the UV caused insufficient volts to operate the leds while the GPU is off.

Now, after I restored the voltages to the original, the BLN still doesn't work.

tried:

• restoring the voltage to original
• re-flashing the kernel
• changing kernel to Semaphore
• reinstall the Rom w/o wipes

Any ideas how to fix?

what setting did you recommend for an old cappy who is very unstable with default values and got many SoD and restart specially in specific battery % ranges?

Im a little worried about the Max ARM Volt, i puted the LiveOC at 110% with

Target low OC @800 Mhz and
Target High OC @1300Mhz
The Max CPU freq is at this moment @1320, i lowered the Max int Volt to 1225 mV and the phone is working really FAST, but the MAX Arm Volt (by default) is @ 1500mV and dont know if i should touch it and use a lower value or leave it alone. Any advise?

Originally Posted by Darkuso

Im a little worried about the Max ARM Volt, i puted the LiveOC at 110% with

Target low OC @800 Mhz and
Target High OC @1300Mhz
The Max CPU freq is at this moment @1320, i lowered the Max int Volt to 1225 mV and the phone is working really FAST, but the MAX Arm Volt (by default) is @ 1500mV and dont know if i should touch it and use a lower value or leave it alone. Any advise?

I'm not sure what you are saying.. you shouldn't have to adjust the Max for either. Just the steps for each speed. While the CPU can handle the speed, remember heat is our biggest enemy. I'm at 1100mHz with 1250mv and getting 42c. Which 40c is the factory battery Max temp. And tkglitch says to keep it under 43c.

Also anyone else have temps this high on such a low clock?
10% Live oc
Target low=400
CPU clock =1100 @1250mv
Temp 42c

Sent from my SCH-I500 using xda premium

Originally Posted by Darkuso

Im a little worried about the Max ARM Volt, i puted the LiveOC at 110% with

Target low OC @800 Mhz and
Target High OC @1300Mhz
The Max CPU freq is at this moment @1320, i lowered the Max int Volt to 1225 mV and the phone is working really FAST, but the MAX Arm Volt (by default) is @ 1500mV and dont know if i should touch it and use a lower value or leave it alone. Any advise?

The max voltage is to keep you from accidentally putting the voltage too high and frying your device. I wouldn't recommend changing it. It's more of a failsafe than anything.

Herp derp Captivate XDA Premium App.

Originally Posted by pizz0wn3d

The max voltage is to keep you from accidentally putting the voltage too high and frying your device. I wouldn't recommend changing it. It's more of a failsafe than anything.

Herp derp Captivate XDA Premium App.

Thanks man, i didnt touch it and o wont. I just wanted be sure.

Enviado desde mi SGH-I897 usando Tapatalk 2

Originally Posted by Darkuso

Thanks man, i didnt touch it and o wont. I just wanted be sure.

Enviado desde mi SGH-I897 usando Tapatalk 2

Yeah I was kinda confused by it at first until I lowered it and realized what it did lol.

Herp derp Captivate XDA Premium App.

Most stable Live overclock for me

---

Hi guys just wanted to share my settings with you guys

Set governor to performance
then set BOTH Min and Max cpu freq to 1000Mhz

there after go to volt and change max arm volt to 1375
and 1000MHz arm volt to 1375
then go down to
Internal voltage
and change 1000MHz to
1175MHz

then set liveOC to 122 or 124%, been playing nova 3 with these settings and watching HD movies at 1080i