Originally Posted by PAIIITET

latest beta 1205040904-ETaNa_STOCK_OTF-3.0.y.zip is stable?

can't tell you about stock version but oc version is very stable for me, no boot problems, no r-w issues on system, no bsod or sod.

Originally Posted by PAIIITET

latest beta 1205040904-ETaNa_STOCK_OTF-3.0.y.zip is stable?

look like that....but i got a random bsod before on the train...

Originally Posted by vadonka

well i draind my battery and im charged now to full then do a test starting from 100% batt level as i do with the kernel 2.6.32.y

done the test? the result? =P

Finally working!

---

Installed the latest clockworkmod (5.0.2.8), installed the latest stable release and...

Its working! No boot problem, no system r/w issues (when using V6 supercharger), and no SOD up till now, 24 hours after installing.

Keep up the good work Vadonka!

By the way, ETaNa app doesn't get installed with this latest version?

Hi Vadonka,

thank you very much for the 03.05. release. I use:

BB+RIL 10d
Temasek Kang 99
Your OC Kernel 03.05.
Antutu CPU Master

And it's greaaaaaaaaaaaaaaat! No problem, good battery, calls work without problem, etc. I love it!

(I saw others have call problems with 03.05. one? Me not)


Best regards

a little question...

in the 3.0.y version... the google's snappy zram conversion, instead of the default lzo one, is used by default when i enable the compcache or i've to do some more (hidden) steps?

Originally Posted by kennbo82

Hi Vadonka,

thank you very much for the 03.05. release. I use:

BB+RIL 10d
Temasek Kang 99
Your OC Kernel 03.05.
Antutu CPU Master

And it's greaaaaaaaaaaaaaaat! No problem, good battery, calls work without problem, etc. I love it!

(I saw others have call problems with 03.05. one? Me not)


Best regards

It was single, just a fail in the forward porting from v21y. The latest beta work without issues.

Sent from my Optimus 2X using xda premium

Originally Posted by plakers

After a 6 minutes test my battery temp is 43.8°C (in the stability test and confirmed in system panel) - the temp in my office is around 26°C today

Case closed?

Don't know if there ever was a case to close, but it would help to compare the same temps. Chaozbr and I were talking about CPU-temps, while you measured battery temp.

Battery-temp of 43.8 is above recommended temp, btw.

Originally Posted by TrymHansen

Don't know if there ever was a case to close, but it would help to compare the same temps. Chaozbr and I were talking about CPU-temps, while you measured battery temp.

Battery-temp of 43.8 is above recommended temp, btw.

I entered the topic to say this, and I think the phone of the tester friend gets hotter than mine, mine goes only to 40°C batt temp, I only imagine CPU temps.
I'm saying about temps, because many of us, try to use always the maximum CPU clock, and this can make us broke our phones, ofc I can be wrong, because I didn't know too much.

Thanks

Sent from my LG-P990 using XDA

Originally Posted by yukkio

Vadonka, I have boot problems with kernels since the version of April 27 but 25 April version not. I don't know what happens :(
Br

Please help,I can't install any kernel since 25 April, oc or stock. I did all that I know: format system, re init system...
Thank you.
Br

Crash after entering PIN code (first boot)

---

I just installed 1205030919-ETaNa_OC_OTF-3.0.y.zip together with temasek's Unofficial CM7.2 RC-99. Everything seemed to be OK, but during the first boot and after entering my PIN code it briefly showed "Unlocking SIM card" followed by a black screen. Meanwhile the keypad turned off, turned on again, turned off, turned on (infinitive loop). After a while i pulled the battery.

Now after entering my PIN code the screen turns black and shows (random) vertical blurred stripes. It does however - after a couple of seconds - seem to boot fine.

Is this normal behavior? It certainly doesn't feel right.

Clockwordmod log (probably not needed, just in case):

-- Installing: /sdcard/0/1205030919-ETaNa_OC_OTF-3.0.y.zip
Finding update package...
I:Update location: /sdcard/0/1205030919-ETaNa_OC_OTF-3.0.y.zip
Opening update package...
Installing update...
Extracting files...minzip: Extracted file "/tmp/busybox"
minzip: Extracted file "/tmp/initrd.img"
minzip: Extracted file "/tmp/install.sh"

minzip: Extracted file "/tmp/mkbootimg"
minzip: Extracted file "/tmp/reinitsystem.sh"
minzip: Extracted file "/tmp/zImage"
minzip: Extracted file "/tmp/system/bin/nvrm_daemon_v10"
minzip: Extracted file "/tmp/system/bin/nvrm_daemon_v20q"
minzip: Extracted file "/tmp/system/etc/hosts"
minzip: Extracted file "/tmp/system/etc/init.d/00banner"
minzip: Extracted file "/tmp/system/etc/init.d/01sysctl"
minzip: Extracted file "/tmp/system/etc/init.d/03firstboot"
minzip: Extracted file "/tmp/system/etc/init.d/04modules"
minzip: Extracted file "/tmp/system/etc/init.d/05mountsd"
minzip: Extracted file "/tmp/system/etc/init.d/06mountdl"
minzip: Extracted file "/tmp/system/etc/init.d/20userinit"
minzip: Extracted file "/tmp/system/etc/init.d/90tweakaio"
minzip: Extracted file "/tmp/system/fonts/Clockopia.ttf"
minzip: Extracted file "/tmp/system/fonts/DroidSans-Bold.ttf"
minzip: Extracted file "/tmp/system/fonts/DroidSans.ttf"
minzip: Extracted file "/tmp/system/lib/libsqlite.so"
minzip: Extracted file "/tmp/system/lib/modules/cifs.ko"
minzip: Extracted file "/tmp/system/lib/modules/ntfs.ko"
minzip: Extracted file "/tmp/system/lib/modules/wireless.ko"
minzip: Extracted file "/tmp/system/xbin/bash"
minzip: Extracted file "/tmp/system/xbin/mkbootimg"
minzip: Extracted file "/tmp/system/xbin/rh"
minzip: Extracted file "/tmp/system/xbin/su"
minzip: Extracted file "/tmp/system/xbin/unpackbootimg"
minzip: Extracted file "/tmp/system/xbin/zram_stats"
minzip: Extracted file "/tmp/data/app/ETaNa-kernel-tweakaio.apk"
about to run program [/sbin/busybox] with 3 args
about to run program [/sbin/busybox] with 3 args
about to run program [/sbin/busybox] with 3 args
mount: mounting /dev/block/mmcblk0p2 on /cache failed: Device or resource busy
run_program: child exited with status 255
about to run program [/tmp/reinitsystem.sh] with 1 args
checking if system partition needs re-inittar: removing leading '/' from member names

system partition needs re-init
trying to re-initialize system partition
this will take a minute
DO NOT INTERRUPT!
saving system contents
#####################################

formatting system
Filesystem label=
OS type: Linux
Block size=1024 (log=0)
Fragment size=1024 (log=0)
89760 inodes, 358400 blocks
17920 blocks (5%) reserved for the super user
First data block=1
Maximum filesystem blocks=524288
44 block groups
8192 blocks per group, 8192 fragments per group
2040 inodes per group
Superblock backups stored on blocks:
    8193, 24577, 40961, 57345, 73729, 204801, 221185
tune2fs 1.41.6 (30-May-2009)

Please run e2fsck on the filesystem.

Creating journal inode: done
This filesystem will be automatically checked every 20 mounts or
180 days, whichever comes first.  Use tune2fs -c or -i to override.
/dev/block/mmcblk0p1: Group descriptor 0 checksum is invalid.  FIXED.
/dev/block/mmcblk0p1: Group descriptor 1 checksum is invalid.  FIXED.
/dev/block/mmcblk0p1: Group descriptor 2 checksum is invalid.  FIXED.
/dev/block/mmcblk0p1: Group descriptor 3 checksum is invalid.  FIXED.
/dev/block/mmcblk0p1: Group descriptor 4 checksum is invalid.  FIXED.
/dev/block/mmcblk0p1: Group descriptor 5 checksum is invalid.  FIXED.
/dev/block/mmcblk0p1: Group descriptor 6 checksum is invalid.  FIXED.
/dev/block/mmcblk0p1: Group descriptor 7 checksum is invalid.  FIXED.
/dev/block/mmcblk0p1: Group descriptor 8 checksum is invalid.  FIXED.
/dev/block/mmcblk0p1: Group descriptor 9 checksum is invalid.  FIXED.
/dev/block/mmcblk0p1: Group descriptor 10 checksum is invalid.  FIXED.
/dev/block/mmcblk0p1: Group descriptor 11 checksum is invalid.  FIXED.
/dev/block/mmcblk0p1: Group descriptor 12 checksum is invalid.  FIXED.
/dev/block/mmcblk0p1: Group descriptor 13 checksum is invalid.  FIXED.
/dev/block/mmcblk0p1: Group descriptor 14 checksum is invalid.  FIXED.
/dev/block/mmcblk0p1: Group descriptor 15 checksum is invalid.  FIXED.
/dev/block/mmcblk0p1: Group descriptor 16 checksum is invalid.  FIXED.
/dev/block/mmcblk0p1: Group descriptor 17 checksum is invalid.  FIXED.
/dev/block/mmcblk0p1: Group descriptor 18 checksum is invalid.  FIXED.
/dev/block/mmcblk0p1: Group descriptor 19 checksum is invalid.  FIXED.
/dev/block/mmcblk0p1: Group descriptor 22 checksum is invalid.  FIXED.
/dev/block/mmcblk0p1: Group descriptor 23 checksum is invalid.  FIXED.
/dev/block/mmcblk0p1: Group descriptor 24 checksum is invalid.  FIXED.
/dev/block/mmcblk0p1: Group descriptor 25 checksum is invalid.  FIXED.
/dev/block/mmcblk0p1: Group descriptor 26 checksum is invalid.  FIXED.
/dev/block/mmcblk0p1: Group descriptor 27 checksum is invalid.  FIXED.
/dev/block/mmcblk0p1: Group descriptor 28 checksum is invalid.  FIXED.
/dev/block/mmcblk0p1: Group descriptor 29 checksum is invalid.  FIXED.
/dev/block/mmcblk0p1: Group descriptor 30 checksum is invalid.  FIXED.
/dev/block/mmcblk0p1: Group descriptor 31 checksum is invalid.  FIXED.
/dev/block/mmcblk0p1: Group descriptor 32 checksum is invalid.  FIXED.
/dev/block/mmcblk0p1: Group descriptor 33 checksum is invalid.  FIXED.
/dev/block/mmcblk0p1: Group descriptor 34 checksum is invalid.  FIXED.
/dev/block/mmcblk0p1: Group descriptor 35 checksum is invalid.  FIXED.
/dev/block/mmcblk0p1: Group descriptor 36 checksum is invalid.  FIXED.
/dev/block/mmcblk0p1: Group descriptor 37 checksum is invalid.  FIXED.
/dev/block/mmcblk0p1: Group descriptor 38 checksum is invalid.  FIXED.
/dev/block/mmcblk0p1: Group descriptor 39 checksum is invalid.  FIXED.
/dev/block/mmcblk0p1: Group descriptor 40 checksum is invalid.  FIXED.
/dev/block/mmcblk0p1: Group descriptor 41 checksum is invalid.  FIXED.
/dev/block/mmcblk0p1: Group descriptor 42 checksum is invalid.  FIXED.
/dev/block/mmcblk0p1: Group descriptor 43 checksum is invalid.  FIXED.
 /dev/block/mmcblk0p1: |=                                       |  1.6%      /dev/block/mmcblk0p1: |===                                     /  6.4%      /dev/block/mmcblk0p1: |======                                  - 15.9%      /dev/block/mmcblk0p1: |==========                              \ 23.9%      /dev/block/mmcblk0p1: |=============                           | 31.8%      /dev/block/mmcblk0p1: |================                        / 39.8%      /dev/block/mmcblk0p1: |===================                     - 47.7%      /dev/block/mmcblk0p1: |======================                  \ 55.7%      /dev/block/mmcblk0p1: |=========================               | 63.6%      /dev/block/mmcblk0p1: |============================            / 70.0%      /dev/block/mmcblk0p1: |========================================| 100.0%                                                                                       /dev/block/mmcblk0p1: 11/89760 files (0.0% non-contiguous), 19538/358400 blocks
tune2fs 1.41.6 (30-May-2009)
 /dev/block/mmcblk0p1: |=                                       |  1.6%      Rebuilding directory: |================                / 50.0%  2   /dev/block/mmcblk0p1: |========================================| 100.0%                                                                                       /dev/block/mmcblk0p1: 11/89760 files (0.0% non-contiguous), 19538/358400 blocks
mounting system
restoring system contents
#####################################

restore successful
about to run program [/tmp/install.sh] with 1 args
################################
#      LGE Kernel Installer    #
#      rewrited by  vadonka    #
#     UI is optimized for the  #
#         New Touch CWM        #
################################

** Installing LGE kernel Kang **
**  Based on lge-kernel-star  **
**       by the CM team       **

** compiled and cherry picked **
**         by vadonka         **

** Installing on MIUI/CM7 **
Backup build.prop.

Applying build.prop tweaks
**************************
-Kernel config file not found...
--build.prop tweaks enabled by default
--build.prop tweaks enabled
-General
-Battery save
-Scroll hack
-Endcall BSOD workaround
-CM7 specific tweaks
-Speed up rendering
-Increase touch responsiveness
-Vol.but. not wakeup the phone
-Fix some application issues
-Network speed tweak
-Disable the setup wizard

Flashing the kernel
-New kernel image created succesfuly
*******************
-kernel config file not found...
-ramhack is disabled by default
-building the new kernel...
-zeroed mmcblk0p5
dd: writing '/dev/block/mmcblk0p5': No space left on device
16385+0 records in
16384+0 records out
8388608 bytes (8.0MB) copied, 2.057899 seconds, 3.9MB/s
-writing the kernel...
5640+0 records in
5640+0 records out
2887680 bytes (2.8MB) copied, 1.321662 seconds, 2.1MB/s
* Kernel flashed Succesfuly! *

Cleaning up
***********
-Clean up modules folder
-CM7 found!
--Clean up the init.d folder
-Cleaning the dalvik-cache
-Cleaning the cache partition
/dev/block/mmcblk0p2: /lost+found not found.  CREATED.
/dev/block/mmcblk0p2: 11/16384 files (0.0% non-contiguous), 6190/65536 blocks

################################
# Install modules, tweak, etc. #
################################
-Copying modules
-Cyanogenmod found!
--Installing CM7 init scripts
--Installing AIO tweak
-Installing zram_stats binary
-Checking NvRM binary version
--Installing v20q NvRM binary
-Installing Kernel image tools
-Checking bash...
--Bash binary found...
...skipping install bash
-Kernel config file not found...
--skiped su update
-Kernel config file not found...
--Installing roboto font by default
-Installing Roboto font
-Kernel config file not found...
--Installing sqlite patch by default
-Installing SqLite patch
-Kernel config file not found...
--Installing ADblock host file by default
-Installing ADblock host file
-Install TweakAIO config editor app

Umount Partitions
*****************

script result was [0]
################################
#   CM7 Kang Kernel is ready!  #
################################

Install from sdcard complete.