[RECOVERY] ClockworkMod v6.0.3.0

---

Hello all.

Here's CWM recovery, built from the latest version included in the ICS sources. It has support for both internal and external sd card, with the internal being the default. As such, the internal has mount point /sdcard, and the external has /external_sd. Nothing you should normally need to know, unless you want to mount them manually in adb shell.

I provide it in two packages, dependent on how you want to flash it. One for flashing manually in adb shell, and one for flashing with Odin.

recovery-clockwork-6.0.3.0-ancora.zip -> for flashing in adb shell
Don't flash the zip file, but extract and flash the img file.

recovery-clockwork-6.0.3.0-ancora.tar.md5 -> for flashing with Odin
Select the ops file, and enable one package in options, then load the md5 file with the One Package button

In addition, you need Ancora.ops it you're gonna flash it with Odin.

How to navigate in menus:
Volume buttons = go up and down
Home button = select
Power button = go back

I'm too busy right now to write further extensive instructions, so if anyone else would want to do it, that would be great. Otherwise refer to the RZRecovery thread on how to flash in adb shell.

Thanks arco, i can smell ics for sgw already..

Sent from my GT-I8150 using Tapatalk

Hi arco68....most of us have already flashed RZR-2.1.4-ancora-rec.img testing the current ROMS here.

Once flashed no problems right it will be overwritten......

thanks so much for your works!~

CWM on galaxy W....good stuff bro

Anyone knows if I use via ADB flashing will the original RAZR wiped out ?

Please advise thanks

Thanks arco68 !!!
Does this CWM support backups on external SD ?
I am having trouble doing this with RZRecovery.

greets

THE-E

I tryed to flash it using the adb shell but now the phone start only in download mode.

I'm going to re-flash the stock rom KL3, abd I will try with the odin procedure.

How can I do? I have to use, as for the rom, the voice "one package"?

Originally Posted by multipol

I tryed to flash it using the adb shell but now the phone start only in download mode.

I'm going to re-flash the stock rom KL3, abd I will try with the odin procedure.

How can I do? I have to use, as for the rom, the voice "one package"?

You should flash the stock then get root (not sure if needed, but just in case).
Than you will have to open ODIN v.4.43 and select the Ancora.OPS as OPS-file.
After that is selected you can use the OnePackage button to select the downloaded MD5-file with CWM.

If you need the Ancora.OPS, I could upload it.

THE-E

Hi Arco,
I did try it to, i flashed from ADB shell, when i reboot in to recovery , i get a menu and i can select things with the volume buttons, but when i activate a item then i see a hat with an arrow and then it is stucked.
I can go back to the menu, but cant activate what i choose.

Have to pull out the battery to reboot.

Had RzRecovery installed before this one.
Hope you have enough info to resolve this

Edit:
The activate button (left down on the phone) does respond on active and go back, while the go back button (right down on the phone) does not work at all.