FORUMS

CloudPlayer: DIY HiFi Music Streaming Solution

In our Helpful Guide to Music Streaming Services, we mentioned several different services … more

Optimize Battery Life with This Useful App

Battery life is an important aspect of your smartphone, especially if you use it for more … more

The OnePlus 2 & The Year of Smartphone Compromises

We are very close to entering the last third of 2015, and we have now seen many of … more

OnePlus 2 Teardown, Major Android Vulnerability – XDA TV

The OnePlus 2 has been officially released. That and much more news is … more

[Update-Only] nfx-update-kindle-6.2.2 - 1/18/2012

1,649 posts
Thanks Meter: 724
 
Post Reply Subscribe to Thread Email Thread
UPDATE ONLY from 6.2.1 to 6.2.2

Just for clarification this is not a complete rom this is only an Update

AND THIS IS ONLY IF YOU HAVE 6.2.1, not CM

Ok I have packaged up the 6.2.2 update with only the files changed or modified removed and added from 6.2.1
Included in this is:
unsecure boot image
busybox
su binary
and su apk

This is for anyone with root and TWRP already installed and still on 6.2.1
this will not format system it will just update the need files.
So all added apps will remain and all data will be intact.

Install and wipe dalvik and cache, then reboot

Download Update 6.2.2

Files updated, added or removed
Code:
sed
boot.img
cert_swap.sed
build.prop
amazonmp3-unsigned.apk
AmazonVenezia.apk
ATVAndroidClient.apk
Cloud9-unsigned.apk           -  removed
Cloud9-release-unsigned.apk   -  added
Cloud9SystemBrowserProvider-unsigned.apk
com.amazon.dcp.apk
CSApp-unsigned.apk
Email.apk
Facebook.apk
KindleForOtter.apk
Launcher.apk
MarketIntentProxy.apk
MyAccount-unsigned.apk
OOBE-unsigned.apk
OTASilentInstall.apk
OtterAppManager.apk
OtterTutorial.apk
Superuser.apk
SystemUI.apk
Windowshop.apk
applypatch_static
check_prereq
debuggerd
dhcpcd
dnsmasq
fsck_msdos
hostap
idme
iptables
linker
logwrapper
memmgr_test
ping
PrintBootTime
racoon
recovery
run-as
sdcard
sh
SkLibTiJpeg_Test
su
tiap_cu
tiap_loader
updater
wlan_cu
wlan_loader
wpa_supplicant
gateMPApp.out
nameServerApp.out
Kindle_Users_Guide.prc
otacerts.zip
framework-res.apk
am.jar
android.policy.jar
android.test.runner.jar
bmgr.jar
bouncycastle.jar
com.android.location.provider.jar
core-junit.jar
core.jar
ext.jar
framework.jar
idme.jar
ime.jar
input.jar
javax.obex.jar
monkey.jar
pm.jar
services.jar
sqlite-jdbc.jar
svc.jar
libaudiomodemgeneric.so
libc.so
libskia.so
libwebcore.so
busybox
Hope this helps, Enjoy!


NOOB Guide posted by
Quote:
Originally Posted by rorogio

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
NOTE: use only if you have KF version 6.2.1 already rooted, or you may brick your KF!

These are the steps I have done to use this update. They worked 100% for me, BUT I am not responsible if you make mistakes on the road or brick your KF.

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

1. Connect KF to PC
2.1 Unzip Kindle_Fire_Utility_v0.9.2 (find it with Google)
(- If you haven't installed the ADB drivers yet, in Kindle Fire Utility folder find and start "install_drivers.bat"
- If you haven't rooted yet, in Kindle Fire Utility folder find and start "run.bat", choose option "3" (install permanent rot with superuser) and do all the steps to root KF
- Close "run.bat" window)
2.2 In Kindle Fire Utility folder find and start "run.bat"
3. In the new opened window choose option "5" (to install TWRP)
4. Wait for TWRP to be downloaded, and wait all the other steps to be accomplished by the script to install it
5. Restart KF (still connected to PC)
6. Copy nfx-update-kindle-6.2.2.zip on the KF
7. Disconnect KF from PC
8. Reboot your device into TWRP by shutting down the tablet, then pressing the power button when you see a yellow triangle with a fire icon in the center. Press power button until light turn orange. TWRP 2.0 recovery will be loaded then.
9. At this point it’s a good idea to create a backup of your system using TWRP 2.0's backup option. You can then restore later if you need to. (You need about 1.2 GB on "sdcard" folder to be free for the backup)
10. Wipe [dalvik-cache] and [cache]:
Select Cache then Wipe cache.
Select Dalvik-Cache then Wipe dalvik-cache.
11. Go back to Home.
Select Install.
Navigate and select your nfx-update-kindle-6.2.2.zip.
Select "Flash" button after that.
After installed, select Reboot System.
12. After some 5-12min you should be running 6.2.2 updated from 6.2.1.

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
NOTE: use only if you have KF version 6.2.1 already rooted, or you may brick your KF!

These are the steps I have done to use this update. They worked 100% for me, BUT I am not responsible if you make mistakes on the road or brick your KF.

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Last edited by nfinitefx45; 27th January 2012 at 03:24 PM.
The Following 16 Users Say Thank You to nfinitefx45 For This Useful Post: [ View ]
 
 
18th January 2012, 09:16 AM |#2  
Member
Thanks Meter: 0
 
More
Can somebody tell a "noob" how i have to install this update?
I have root and TWRP installed allready on KF 6.2.1.

Thanks a lot
18th January 2012, 12:26 PM |#3  
Senior Member
Thanks Meter: 465
 
More
Quote:
Originally Posted by LilaLurch

Can somebody tell a "noob" how i have to install this update?
I have root and TWRP installed allready on KF 6.2.1.

Thanks a lot

copy to sdcard and install with twrp - wipe dalvik/cache - reboot
give it some time at first start

works like a charme !
The Following User Says Thank You to b63 For This Useful Post: [ View ]
18th January 2012, 08:22 PM |#4  
Senior Member
Thanks Meter: 19
 
More
Will updating to this stop the OTA update from installing?

Sent from my SGH-T989 using xda premium
18th January 2012, 08:47 PM |#5  
Junior Member
Thanks Meter: 0
 
More
This works like a charm, thanks!
18th January 2012, 08:57 PM |#6  
Member
Manchester, CT
Thanks Meter: 9
 
More
So cool. Thanks. Just flashed this and my kindle is updated to 6.2.2 with root and without having to do any app restoration work.
18th January 2012, 08:58 PM |#7  
trapdogg's Avatar
Senior Member
Thanks Meter: 5
 
More
Yeah this worked like a charm with everything working so far

Sent from my Kindle Fire using xda premium
18th January 2012, 09:13 PM |#8  
Senior Member
Thanks Meter: 18
 
More
Worked for me, I put IntersectRaven's kernel in the zip together with my modified build.prop.
18th January 2012, 09:44 PM |#9  
Member
Thanks Meter: 2
 
More
is this the 6.2.2 firmware rooted, right?
18th January 2012, 10:04 PM |#10  
nfinitefx45's Avatar
OP Senior Member
Flag Abingdon, MD.
Thanks Meter: 724
 
Donate to Me
More
Yes the only difference is this just updates what needs to be updated to comply with 6.2.2. Instead of formatting/ installing the entire system structure.

Thus eliminating the need to have to install all your apps and settings to what they where previously.
The Following User Says Thank You to nfinitefx45 For This Useful Post: [ View ]
19th January 2012, 12:09 AM |#11  
Senior Member
Thanks Meter: 14
 
More
Worked great thanks.

Sent from my Kindle Fire using Tapatalk

Read More
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes