[Q] Can't mount :eek:
My player is really doomed i think.
Hope some one know a fix for this.
I tried different (stock)roms and bootloaders.
With no luck, it only boots up into recovery mode. (CWM-Based Recovery v184.108.40.206)
With these errors:
E: Can't mount /cache/recovery/command
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
When i try to view the partition table its saying that there is no table.
~ # fdisk /dev/block/mmcblk0 -l
fdisk /dev/block/mmcblk0 -l
Disk /dev/block/mmcblk0: 7944 MB, 7944011776 bytes
4 heads, 16 sectors/track, 242432 cylinders
Units = cylinders of 64 * 512 = 32768 bytes
Disk /dev/block/mmcblk0 doesn't contain a valid partition table
And when i try to open it, its creating a standard dos table.
Device contains neither a valid DOS partition table, nor Sun, SGI, OSF or GPT di
Building a new DOS disklabel. Changes will remain in memory only,
until you decide to write them. After that the previous content
won't be recoverable.
The number of cylinders for this disk is set to 242432.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Command (m for help):
But when i try to create a partition i can only make 4 Partitions.
So i can't create enough partitions to Flash the device properly.
Command (m for help): n
p primary partition (1-4)
Partition number (1-4):
Does someone know how to fix this? or perhaps help me the right way.