Introducing XDA:DevCon – A Conference For Developers By Developers
XDA Developers Android and Mobile Development Forum
Forgot your password?
 
Post Reply+
Tip us?
 
denniz27
Old
#1  
Junior Member - OP
Thanks Meter 0
Posts: 1
Join Date: Nov 2006
Default [Q] Bricked Ideos S 7

Hi there.
yesterday my pad told me there was a new version , so i updated it (at least tried)
Now when i start up my tab i get the following:
Enter into fastboot mode
You can press HOME + BACK to reboot device.
so i wated,, and waited and nothing happend when i press HOME + Back the device will restart but i will get the spalsh screen and aftrewards the same text again..

i checkd the form and found no body with this issue, i tried to re-install the firmware.
so i took the micro SD card Fomrated it (first time FAT 32 second time FAT) and put the dlload folder with the told version on it..
took my battery from my device placed it in again and pressed power button, device starts up and i get the same message again, and NO progress bar ..

please help me with this issue....
 
kayyappan
Old
(Last edited by kayyappan; 28th February 2012 at 08:30 AM.) Reason: Correction
#2  
Member
Thanks Meter 0
Posts: 32
Join Date: Mar 2011
Location: Muscat, Oman
Wink Bricked IDEOS S7

If you have not already got your S7 back to working condition you may try the following. I faced similar situation(s) some time back.

Requirement: External sdcard formatted in FAT32 and with dload directory with firmware installed on the unit. Use Indonesian stock firmware Froyo 2.2.2. Search around and it is easy to find. Make sure one of the files is unlmt.cfg and not any other. No glitches and all modules work fine. Since I have been experimenting with different ROMs and some personal mods I have flashed so many times, got lost and started all over again.

It is not necessary to have a battery installed but the charger must be connected.

1. Press Back and Power button together to startup and release Power button after few seconds. You should see a white bar. Release Back button.

2. After a few sec disconnect power charger.

3. Reconnect the charger. Press power button. You will a stable IDEOS for few sec and flashing will start.

At times you may have to repeat more than once to get it going. The blinking should be slow. If suddenly flashing stops after few bars or blinking frequency jacks up disconnect and try again.

Best of luck.
 
Post Reply+
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

report this ad
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Go to top of page...