i want to reset my binary without jig can anyone guide me with proper steps & i dont want to ruin my phone

Originally Posted by azhar.munshi

i want to reset my binary without jig can anyone guide me with proper steps & i dont want to ruin my phone

Using the JIG is your safest bet, ask around, someone might have it, or you can also make 1, there are many youtube instructions on how to make it.. All you need is a 300k Ohm resistor and a micro USB wire male port, ( which can be easily ripped off any micro USB to USB wire), it wont even cost u 50RS or you can buy the JIG for around 100rs...
This method is the last resort that your device wont even go to recovery mode or something.

---------- Post added at 01:06 AM ---------- Previous post was at 12:55 AM ----------

I noticed the link to the files is down so i uploaded it to my dropbox public folder and the link is in the Galaxy R Upload Download Box.

Originally Posted by sagarwadhwa1

Here is the link for the APX recovery mode files. I also uploaded to the galaxy R box however i couldn't get the link, so if 'cooleagle' gets it for me i'll give that link out too.
For the time, here is the link from my dropbox public folder.

https://dl.dropbox.com/u/10759393/ga...APX%20mode.zip

The only bad thing in this repair instruction is that although it says "backup EFS", there is no way to do this while the phone is bricked. And when it's repaired it's already too late to do backups as EFS is already lost.

Originally Posted by Klajnor

Mini step-by-step instruction:
0) Download and unpack archive to directory like c:\repair

1) Entering APX mode. Turn off phone. Hold Volume Up + Home buttons 10-15 second and plugin phone in usb port.
Install drivers from folder drivers in archive. After installing the device driver is defined as NVIDIA USB Boot-recovery driver for Mobile devices. It is mean that phone in APX mode.
You may try this method to enter APX mode: remove battery and unplug phone from PC. Hold Volumel Up + Home and plug phone to PC. Phone must be in APX mode now. Put buttery in phone.

2) Before do something do do nandroid backup. Copy it to PC.
Backup /efs to safe your IMEI.

3) Enter to APX mode, install driver and start GT-I9103.bat. If you have some errors - try again without rebooting phone. Or unplug-plug USB and try again.
Phone reboot in download mode.

4) Use Odin to flash ogiginal samsung ROM. I used сhinese ZCLA1 2.3.6. You must use PIT file to repartition file system of phone. p5.pit is on archive. If you try flash without PIT process will be fault.

5) When flashing finished load phone in recovery mode. Wipe /cache and try wipe /data.
Load android and format internal memory. Reboor in recovery mode again. Wipe all.

6) Now you have 100% work phone with custom counter equal zero, without yellow triangle and etc.
Take root and restore /efs to restore IMEI.
Take CWM, custom kernel and everything what you need.

Enjoy!

PS I have about 2-3 hours to sure phone work normal. If you know in advance - can be done in 15-20 minutes.


Google translate of my instuction( russian to english):

i am gettting error in odin where i can get pit file

Originally Posted by azhar.munshi

i am gettting error in odin where i can get pit file

its inside of repair package find for p5.pit

for full detailed tut visit here
http://forum.xda-developers.com/show....php?t=1706572

Originally Posted by Klajnor

Mini step-by-step instruction:
0) Download and unpack archive to directory like c:\repair

1) Entering APX mode. Turn off phone. Hold Volume Up + Home buttons 10-15 second and plugin phone in usb port.
Install drivers from folder drivers in archive. After installing the device driver is defined as NVIDIA USB Boot-recovery driver for Mobile devices. It is mean that phone in APX mode.
You may try this method to enter APX mode: remove battery and unplug phone from PC. Hold Volumel Up + Home and plug phone to PC. Phone must be in APX mode now. Put buttery in phone.

2) Before do something do do nandroid backup. Copy it to PC.
Backup /efs to safe your IMEI.

3) Enter to APX mode, install driver and start GT-I9103.bat. If you have some errors - try again without rebooting phone. Or unplug-plug USB and try again.
Phone reboot in download mode.

4) Use Odin to flash ogiginal samsung ROM. I used сhinese ZCLA1 2.3.6. You must use PIT file to repartition file system of phone. p5.pit is on archive. If you try flash without PIT process will be fault.

5) When flashing finished load phone in recovery mode. Wipe /cache and try wipe /data.
Load android and format internal memory. Reboor in recovery mode again. Wipe all.

6) Now you have 100% work phone with custom counter equal zero, without yellow triangle and etc.
Take root and restore /efs to restore IMEI.
Take CWM, custom kernel and everything what you need.

Enjoy!

PS I have about 2-3 hours to sure phone work normal. If you know in advance - can be done in 15-20 minutes.


Google translate of my instuction( russian to english):

but my phone is not processing in recovery mode

Originally Posted by azhar.munshi

but my phone is not processing in recovery mode

u should flash choosing re partiton with included pit file selected in pit tab.

after falshing ur device will boot with error saying /data is not accessible (i dont remember perfectly error should look like this) after that reboot ur device and it will boot perfectly.

ho to save /efs folder without error

Sent from my GT-I9103 using xda premium

Originally Posted by Birki96

ho to save /efs folder without error

Sent from my GT-I9103 using xda premium

U can use efs backup pro tool to do it.

Sent from my GT-I9103 using Tapatalk 2

Originally Posted by xlm13x

U can use efs backup pro tool to do it.

Sent from my GT-I9103 using Tapatalk 2

i had tried efspro but after restoration my imei is not working