GT-S5830C/i/M - ROOT, UNROOT, FW BACK-UP, FW RESTORE and FW UPDATE!

---

HOW TO ROOT GT-S5830C/i/M

----TO ROOT----
1. copy the file ROOT-S5830C-i-M.zip to SDCARD.
2. Turn off the phone, press and hold VOL-UP + HOME + POWER
3. apply the update file ROOT-S5830C-i-M.zip from sdcard and reboot.

----TO UNROOT----
1. copy the file UNROOT-S5830C-i-M.zip to SDCARD.
2. Turn off the phone, press and hold VOL-UP + HOME + POWER
3. apply the update file UNROOT-S5830C-i-M.zip from sdcard and reboot.


HOW TO MAKE THE PARTIAL BACKUP OR FULL BACKUP OF FIRMWARE.

-ClockWorkMod Recovery 5 - for use in future custons rom or partial back-up.-
CWM Recovery WORKING! not fleshable version, on reboot it back to stock recovery!
put file in your sdcard and run in original recovery same as apply update!
USE TO PARTIAL BACK-UP and RESTORE you ROM!


-Full backup with CWM to ODIN format.-
1. Copy both files ClockWorkRec_S5830C-i-M.zip and CWM_BackUP_FW_ODIN.zip to SDCARD.
2. Turn off the phone, press and hold VOL-UP + HOME + POWER.
3. Apply the update file ClockWorkRec_S5830C-i-M.zip from sdcard.
4. Apply the update file CWM_BackUP_FW_ODIN.zip from sdcard and wait the copy and generation of FW.


HOW TO UPDATE OR RESTORE FIRMWARE IN GT-S5830C-i-M WITH ODIN3.

To get stock FimWare go to FirmWares Stock SamSung if you phone model and operator is not listed go to FirmWare Checker and PUT your phone details, after minutes, You FirmWare stay available.

-To get phone details-.
*2767*4387264636# - viewer the product code.
*#1234# - viewer the PHONE PDA CSC versions.

-Sample of required details in SamFirmWare.com FirmWare checker-.
Product Code = GT-S5830OKCZTO
PDA = S5830CVJKL4
CSC = S5830CZTOKL4
PHONE = S5830CVJKL4

Sample of Check Fus Downloader, to download firmware direct from samsung servers!


To flash the FirmWare is needed SamSung drivers installed and the ODIN3 v3.07.

Turn off the PHONE, press and hold VOL-UP + VOL-DOWN + POWER
select download mode in screen and start ODIN3, inside ODIN3 select your files, PIT, BOOT, PHONE, PDA, CSC, the BOOT file not needed!

If you have only one file xxxx.tar.md5 put into PDA.

Only leave selected the checkbox, reboot and Factory reset.

Just press START!


Thanks all.

get config from kernel using adb pull /proc/config.gz
so we can compare hardware differences.. or use some hardware info app to see the changes from ace

Originally Posted by madman_amit

get config from kernel using adb pull /proc/config.gz
so we can compare hardware differences.. or use some hardware info app to see the changes from ace

adb report = file not exist.

Hw info in first post!

The same as s5830i :P

looks like samsung love to revise galaxy ace to never revision number.
previously we got gt-s5830i, now this the gt-s5830c. maybe their improve something under the hood to make it better than original generic gt-s5830. so hows the battery life? it it crappy?

Originally Posted by an0nym0us_

looks like samsung love to revise galaxy ace to never revision number.
previously we got gt-s5830i, now this the gt-s5830c. maybe their improve something under the hood to make it better than original generic gt-s5830. so hows the battery life? it it crappy?

The battery lasting up two days. in my use.
In my work the FM radio is always on.
And when I'm home I browsed through a Wi-Fi
When in idle the line of battery drain is still not declie this is incredible.

Originally Posted by ickyyy

The same as s5830i :P

What version of the ODIN S5830i use?
Tell me the version I'll try, if not detect my phone can not be the same S5830i.
Thanks

Hardware is the same..s5830i uses Odin v1.85

Yup, this is S5830i its codename is cooperve
and there is no such thing as S5830C

Gpu vendor - Broadcom wtf ?

Sent from my GT-S5830 using xda premium