[BETA][Kernel][Port][GT-P6200]

---

First I must thank @ aorth, and @ garyd9. Without these guys, this would not be here. Please smash their thanks button when you see them.Thank you guys so much. Much if not all of this is gard9's mod's just ported to our device. In fact until I make any relevant edits this thread will remain tagged [PORT].

Beta 4 up. Stock Clocks and voltages built a version with voltage tables intact, but lowering even one of them by the min(25mV) and applying in SetCpu causes panic.

Beta testers needed. You know the drill. Backup and feedback is always appreciated.


Im almost positive all 6200 kernel partitions are on mmcblk0p5, you can double check with 'get pit' & heimdall. Mobile Odin says it supports P6200 and works fine. I honestly can not say for sure, but Im 99% confident this is the case. Those with any rare models, please be Warned!Flashing a kernel to the incorrect partition is asking to be bricked.--please put both custom and stock on sdcard in case you cannot boot.--

The 2 .zips that have zImage at the end, are to be extracted and flashed with Mobile Odin(recommend Pro to wipe), or heimdall.
Keep in mind if you use Mobile Odin and it doesnt boot, you will be stuck. Good idea to have stock loaded for heimdall, or stock .zip wit CWM Recovery.

The other 2 that start with GT-P6200 can be flashed in recovery. <WARNING>: SOME People have had to wipe /data ; factory reset to get past stuck boot logo.</WARNING> I have updated the install script, so cache and dalvik should be totally cleared.

Either way my custom binary count hasnt changed any.


Features

• custom bootanimation support: place appropriate botoanimation.zip in: /system/media/ with permission rw-r--r--. The ICS one garyd made us works lovely. Im using the xda TV one. link coming soon:

• Busybox in /sbin.

• Support for init.d scripts. (Personal warning about Supercharger scripts: Nitro lag nullifier is OK, but I dont recommend using the I/O tweaks, put me in a boot loop everytime. Be Warned. Also his 3G tweaks made my 3G speeds worse.)

• Removed a lot of debug stuff.

• unsecure kernel (adb shell gives root)

• reboot bootloader and reboot download support
  (quick boot in market is a great app)

Enjoy!!

reserved

---

Beta 4 up: 3/20

Removed OC/UV, stock clocks and voltages. tried a build with Gary's table sysfs in there, UV even one frequency by 25mV and pressing apply in SetCpu caused seizure. At least were stable now. Im not too concerned about battery life. There are other tweaks we can apply.





github: still updating..

https://github.com/crotoloandroid

Established on LA2 (SER). Far so good, thanks.

Putting it through its paces right now

Thanks


SetCPU set to 200 min, 1400 max
OnDemand governor. No other changes.

Nenamark1: 55.6 fps (no previous record)
Nenamark2: 41.1 fps (47.7 fps pre-oc)... very erratic performance

Stability Test, HQ CPU&GPU, 6 minute test: CPU passes, 7. GPU passes, 55. No failures

GL Benchmark v2.1 (All Tests): Passed, however can't upload to GLBenchmark.com as their captcha service is ****ed


Only one issue I've come across so far, and this is the same issue RichardTrip was having when he compiled some custom kernels for me earlier this year. Random wakelocks bring the tab out of sleep and turn the screen on.
These are caused by the usb scanner looking for external USB devices...

D/UsbService( 3447): setUsbObserverNotification :: titleId = 0, messageId = 0, icon = 17302785, visible = false, dismissable = false
D/usbhost ( 3447): new device /dev/bus/usb/001/004
D/usbhost ( 3447): usb_device_open /dev/bus/usb/001/004
D/usbhost ( 3447): usb_device_new /dev/bus/usb/001/004 fd: 298
D/usbhost ( 3447): usb_device_new read returned 259 errno 4
D/UsbService( 3447): usbDeviceAdded : device :: /dev/bus/usb/001/004 [1519h:0020h] [02h,00h,00h] (CDC Control)
D/UsbService( 3447): isBlackListed :: deviceName = /dev/bus/usb/001/004
D/UsbService( 3447): isBlackListed :: mHostBlacklist[i] = /dev/bus/usb/001/002
E/UsbService( 3447): isBlackListed :: clazz = 2, subClass = 0, protocol = 0
E/UsbService( 3447): isBlackListed :: clazz2 subClass=0
E/UsbService( 3447): continue...
D/UsbService( 3447): usbDeviceAdded : interface :: /dev/bus/usb/001/004 [1519h:0020h] [02h,02h,01h] (CDC Control)
E/UsbService( 3447): isBlackListed :: clazz = 2, subClass = 2, protocol = 1
E/UsbService( 3447): isBlackListed :: clazz2 subClass=2
D/UsbService( 3447): usbDeviceAdded : interface :: /dev/bus/usb/001/004 [1519h:0020h] [0ah,00h,00h] (CDC Data)
E/UsbService( 3447): isBlackListed :: clazz = 10, subClass = 0, protocol = 0
E/NotificationService( 3447): cancelNotification - pkg:android, id:17302785
D/TabletStatusBar( 3529): setVisibility(View.VISIBLE
E/UsbService( 3447): isBlackListed :: clazz10 subClass=0
D/UsbService( 3447): usbDeviceAdded : interface :: /dev/bus/usb/001/004 [1519h:0020h] [02h,02h,01h] (CDC Control)
E/UsbService( 3447): isBlackListed :: clazz = 2, subClass = 2, protocol = 1
E/UsbService( 3447): isBlackListed :: clazz2 subClass=2
D/UsbService( 3447): usbDeviceAdded : interface :: /dev/bus/usb/001/004 [1519h:0020h] [0ah,00h,00h] (CDC Data)
D/dalvikvm( 6436): GC_CONCURRENT freed 358K, 11% free 6800K/7559K, paused 2ms+1ms
E/UsbService( 3447): isBlackListed :: clazz = 10, subClass = 0, protocol = 0
E/UsbService( 3447): isBlackListed :: clazz10 subClass=0
D/KeyguardViewMediator( 3447): setHidden false
D/UsbService( 3447): usbDeviceAdded : interface :: /dev/bus/usb/001/004 [1519h:0020h] [02h,02h,01h] (CDC Control)
E/UsbService( 3447): isBlackListed :: clazz = 2, subClass = 2, protocol = 1
E/UsbService( 3447): isBlackListed :: clazz2 subClass=2
D/UsbService( 3447): usbDeviceAdded : interface :: /dev/bus/usb/001/004 [1519h:0020h] [0ah,00h,00h] (CDC Data)
E/UsbService( 3447): isBlackListed :: clazz = 10, subClass = 0, protocol = 0
E/UsbService( 3447): isBlackListed :: clazz10 subClass=0
D/UsbService( 3447): usbDeviceAdded : interface :: /dev/bus/usb/001/004 [1519h:0020h] [02h,02h,01h] (CDC Control)
E/UsbService( 3447): isBlackListed :: clazz = 2, subClass = 2, protocol = 1
E/UsbService( 3447): isBlackListed :: clazz2 subClass=2
D/UsbService( 3447): usbDeviceAdded : interface :: /dev/bus/usb/001/004 [1519h:0020h] [0ah,00h,00h] (CDC Data)
E/UsbService( 3447): isBlackListed :: clazz = 10, subClass = 0, protocol = 0
E/UsbService( 3447): isBlackListed :: clazz10 subClass=0
D/UsbService( 3447): turnOnLcd ::
D/PowerManagerService( 3447): reactivateScreenLocksLocked mProxIgnoredBecauseScreenTurnedOff=true
I/PowerManagerService( 3447): Ulight 0->3|0
I/PowerManagerService( 3447): setTargetLocked mask=2 curValue=0.0 target=95 targetValue=95 delta=6.3333335 nominalCurrentValue=0
I/PowerManagerService( 3447): scheduling light animator
I/power   ( 3447): *** set_screen_state 1
D/KeyguardViewMediator( 3447): onScreenTurnedOn, seq = 3
D/KeyguardViewMediator( 3447): notifyScreenOnLocked
D/KeyguardViewMediator( 3447): handleNotifyScreenOn
D/LockScreen( 3447): updateLayout: status=Normal
D/PowerManagerService( 3447): enableLightSensorLocked enable=true mAutoBrightessEnabled=false
D/PowerManagerService( 3447): jumpToTargetLocked targetValue=95: 2
I/PowerManagerService( 3447): Light Animator Finished curIntValue=95
I/OrientationDebug( 3447): [WindowOrientationListener] in enable(), now call SensorManager.registerListener()
D/SensorManager( 3447): registerListener :: handle = 4  name= MPL accel delay= 60000 Listener= android.view.WindowOrientationListener$SensorEventListenerImpl@40c5dc38
D/MPLSensor( 3447): handle : 4 en: 1
D/MPLSensor( 3447):  enabled_sensors: 16 dmp_started: 0
D/MPLSensor( 3447):   MLSetMPUSensors: 70
I/MPL-ml  ( 3447): Actual ODR: 25 Hz
D/MPLSensor( 3447):   set_power_states > MLDmpStart()
I/        ( 3447): mpu3050_resume: Resuming to 0070
D/MPLSensor( 3447): setDelay : handle=4, delay=200000000
I/        ( 3447): mpu3050_suspend: suspending sensors to 0000
I/        ( 3447): mpu3050_suspend: Will resume next to 0070
I/MPL-ml  ( 3447): Actual ODR: 25 Hz
I/        ( 3447): mpu3050_resume: Resuming to 0070
D/MPLSensor( 3447): setDelay : handle=4, delay=60000000
I/        ( 3447): mpu3050_suspend: suspending sensors to 0000
I/        ( 3447): mpu3050_suspend: Will resume next to 0070
I/MPL-ml  ( 3447): Actual ODR: 25 Hz
I/        ( 3447): mpu3050_resume: Resuming to 0070
V/WindowManager( 3447): Setting event dispatching to true
D/KeyguardViewMediator( 3447): setHidden false
D/WifiStateMachine( 3447): ConnectedState{ what=65659 when=-1ms }
D/WifiStateMachine( 3447): ConnectModeState{ what=65659 when=-1ms }
D/WifiStateMachine( 3447): DriverStartedState{ what=65659 when=-1ms }
D/WifiStateMachine( 3447): SupplicantStartedState{ what=65659 when=-1ms }
E/wpa_supplicant( 3807): initalize the scan timer ( 7 )
D/WifiService( 3447): ACTION_SCREEN_ON
I/ScreenReceiver : ( 4156): android.intent.action.SCREEN_ON
D/ProximityScreenOff( 4156): ScreenReceiver : action = android.intent.action.SCREEN_ON State: IDLEPhoneOn = false
D/WifiStateMachine( 3447): ConnectedState{ what=65618 when=-5ms arg1=1 }
D/SensorManager( 4156): registerListener :: handle = 8  name= GP2A Proximity sensor delay= 10000 Listener= com.itsme4ucz.screenoff.SensorMonitor@408121b0
I/ProximityScreenOff( 4156): SensorMonitor onStart::Registered
D/WifiStateMachine( 3447): ConnectedState{ what=65591 when=-12ms }
D/WifiStateMachine( 3447): ConnectModeState{ what=65591 when=-12ms }
D/WifiStateMachine( 3447): DriverStartedState{ what=65591 when=-12ms }
D/WifiStateMachine( 3447): SupplicantStartedState{ what=65591 when=-13ms }
D/WifiStateMachine( 3447): ConnectedState{ what=65608 when=-13ms arg1=1 }
D/WifiStateMachine( 3447): ConnectedState{ what=65549 when=-13ms }
D/WifiStateMachine( 3447): ConnectModeState{ what=65549 when=-13ms }
D/WifiStateMachine( 3447): DriverStartedState{ what=65549 when=-13ms }
D/WifiStateMachine( 3447): SupplicantStartedState{ what=65549 when=-13ms }
D/WifiStateMachine( 3447): DefaultState{ what=65549 when=-14ms }
D/WifiStateMachine( 3447): ConnectedState{ what=65613 when=-14ms }
D/WifiStateMachine( 3447): ConnectModeState{ what=65613 when=-14ms }
D/WifiStateMachine( 3447): DriverStartedState{ what=65613 when=-14ms }
D/JuicePlotter.CollectService( 4252): battery:48, plugged:0, screen:95, wifi:true(0kb/s), apn:false(0kb/s), bluetooth:false,cpu:2
W/googleanalytics( 4331): Store full. Not storing last event.
D/SurfaceFlinger( 3267): Screen about to return, flinger = 0xa920

Originally Posted by chrisrotolo

1st I must thank @ aorth, and @ garyd. Without these guys, this would not be here. Please smash their thanks button when you see them.Thank you guys so much. Much if not all of this is gard9's mod's just ported to our device.

Beta testers needed. 100% working and stable for me. UWAXME - Malyasia Tab

Im almost positive all 6200 kernel partition is on mmcblk0p5, you can double check with get pit & heimdall. Mobile Odin says it supports P-6200 and works fine. I honestly can not say for sure, but Im 99% confident this is the case. Those with any rare models, please be Warned!--please put both custom and stock on sdcard in case you cannot boot.--

the 2 .zips that have zImage at the end, are to be extracted and flashed with Mobile Odin(recommend Pro to wipe), or heimdall.
Keep in mind if you use Mobile Odin and it doesnt boot, you will be stuck. Good idea to have stock loaded in heimdall, or stock .zip wit CWM Recovery.

the other 2 that start with GT-P6200 can be flashed in recovery.

Either way my custom binary count hasnt changed.

As Im short on time at the moment I will make this brief and update this thread shortly.

contains:

custom bootanimation support place usual in: /system/media/bootanimation.zip with permission rw-r--r--. the ICS one garyd made us works lovely.

OC to 1.4 (NO UV yet, but likely in final release.)

unsecure kernel (adb shell gives root)

and init.d scripts tested with Supercharger. (Personal warning about Supercharger scripts: Nitro lag nullifier is OK, but I dont recommend using the I/O tweaks, put me in a boot loop everytime. Also his 3G tweaks made my actually worse.)

to come: UV, reboot download support, (botologos maybe?), what else? let me know I'll see what I can do. This is my first kernel, Im learning as I go.

This should have been released a week ago, but I was stuck on a permissions issue, that was so easy to fix.

Enjoy!!

it great and mega fast i am so pleased we have you on out team bro you are mega awesome....donation on its way.
i installed the cwm version and it wad stuck in boot loop but i wiped data and it worked...thanks got for app extracter haha :D but well worth it.
thanks man keep up the good work
regards jmar8124 G-tab plus kl3 Malaysia

You had to factory reset? Ill double check my scripts to wipe cache and dalvik

Originally Posted by chrisrotolo

You had to factory reset? Ill double check my scripts to wipe cache and dalvik

ye but it could have been something to do with old tegers haha stupid lum of crap haha its got to be the worst app iv ever purchased. thanos man you kernel is great il try installing it agen with out kernel beeing loaded

Updated my original post above ^^^

Originally Posted by double_ofour

Pare how can i convert CDL to o2? step-by-step please

Thanks chris, will test this. Excited to see some dev going on with international version of 7+. Some suggestions:

Please name your kernel! Make it sound cool as it really is
Add cifs.ko support in the future?

Also just a question, would oc'ng to 1.4 ghz be dangerous without any overvolting. Thanks!
Sent from my GT-P6200 using XDA

download and flash awayyyy.... doing stress test now...

edit...

installation no problem... setting up setcpu now... and doing stress test for max 1400