[Q] Resetting Binary Counters GT-19100G

Search This thread
By:
Advanced…
Paras Lehana

Paras Lehana

Senior Member
Mar 6, 2012
558
214
28
Noida
I've a Samsung Galaxy S II GT-I9100G. Now, I want to replace it.

  • I've unrooted it.
  • I've bought the USB JIG for GT-19100.
  • Now, I used that jig to reset that counters (3 for me) but it doesn't work - It does proceed to the Download Mode but doesn't do anything.

Now, my doubts are:

  • WHAT THE HELL SHOULD I DO TO REPLACE IT?
  • Is the USB JIG is different for the G variant?
  • Do I need to root first?
  • Is there anyone with the I9100G who has successfully reset the binary counters?

AND THE MOST IMPORTANT
What to do now!

Information about my Indian I9100G:

Model Number: GT-I9100G
Android Version: 2.3.6
Phone Code: GT-I9100GLKGINU
Firmware Versions:
PDA: I9100GXWLA1
Phone: I9100DDKL1
CSC: I9100GODDKL1
Kernel Version: 2.6.35.7
root@DELL128#2
 
Last edited:
  • Like
Reactions: ksilver89
Waddle

Waddle

Senior Member
Dec 31, 2011
465
159
Somewhere...
Its weird that the jig doesn't work. My best bet is that you should flash an ics rom and then use chainfires triangle away app to clear the binary.

Sent from my GT-I9100 using Tapatalk 2 Beta-4
 
Paras Lehana

Paras Lehana

Senior Member
Mar 6, 2012
558
214
28
Noida
I've found the solution

Thanks for trying to help me.

But for guys who are experiencing problems in resetting binary counters, here is the SOLUTION

Removing Binary Counter using USB Jig

  • Binary can only be removed using USB Jig which can be bought from online shop or local shop if applicable
  • So far only old bootloader (KJ2 and lower) can be used for removing binary binary counter
  • If running newer than KJ2, for example KL3 and above, you need to flash back the old bootloader for the USB Jig to work again
  • Normally, to use USB Jig, just turn off the phone and plug the USB jig. Done
  • Download the attached i9100g-reset-binary-counter.zip and extract to get tar file. Password : mahadirlab-reset-b001 (Credit to Mahadir Ahmad)
  • Using Odin, just replace the PDA file with this provided tar file
  • Do not use PIT file and start the flashing
  • Now you can use the USB Jig just like mentioned above

-----------------
Thank Me If You Liked My Work
 

Attachments

  • resetable_boot_loader.tar
    1.3 MB · Views: 1,064
  • i9100g-reset-binary-counter.zip
    493.7 KB · Views: 1,306
  • Like
Reactions: ashhanlove, nainaabd, lwk523 and 4 others
S

sbizsangreal

New member
Feb 24, 2013
4
0
hi a question

Paras Lehana said:
I've a Samsung Galaxy S II GT-I9100G. Now, I want to replace it.

  • I've unrooted it.
  • I've bought the USB JIG for GT-19100.
  • Now, I used that jig to reset that counters (3 for me) but it doesn't work - It do proceeds to the Download Mode but doesn't do anything.

Now, my doubts are:

  • WHAT THE HELL SHOULD I DO TO REPLACE IT?
  • Does the USB JIG is different for the G variant?
  • Do I need to root first?
  • Is there anyone with the I9100G who has reset the binary counters?

AND THE MOST IMPORTANT
What to do now!

Information about my Indian I9100G:

Model Number: GT-I9100G
Android Version: 2.3.6
Phone Code: GT-I9100GLKGINU
Firmware Versions:
PDA: I9100GXWLA1
Phone: I9100DDKL1
CSC: I9100GODDKL1
Kernel Version: 2.6.35.7
root@DELL128#2
Click to expand...
Click to collapse

Do you need to reset Custom binary download to fix an issue with the firmware i kinda messed up mine trying to root it-
 
C

creations_31

Senior Member
Feb 13, 2005
67
1
51
INDIA
Solution 100% working for Reseting the counter .

nainaabd said:
I just managed to reset my binary without using usb jig or any aditional bootloader.

Stock rom 4.1.2 +Root+Triangle away=sucess:)

Note :
I hv tried previously same method on ics &cus rom but fail


Sent from my GT-I9100G using xda app-developers app
Click to expand...
Click to collapse


Thanks Mate > Your advice did worked successfully Without using USB JIG .

Method : i9100GXXLSR Rom ( Sammobile ) 4.1.2 Stock

: Rooted with SU-BB-Installer.zip ( rooting process follow asper instructions available )

Updated trangle away .apk (Ver. 2.90) download and install

Run Trangle away > Done

We can revert back 4.1.2 stock binary once again to make it factory default handset , There no More Custom binary count !


Thanks
 
You must log in or register to reply here.

Similar threads

B
Galaxy S 2 GT -I9210T Development?
Replies
2K
Views
356K
D
Damon242
utkarsh568
  • Poll
Samsung Galaxy S duos GT-S7562 Install stock rom
Replies
56
Views
351K
A
abirmallik11
Ronny927
[FIX] [SOLVED!] Play Store No Connection Error Fix!
Replies
359
Views
854K
J
Johncoool
M
Galaxy Grand (Lite) Neo GT-I9060
Replies
209
Views
144K
Alexandre4119
Alexandre4119
Z
[Q] Rooting Unlock Samsung Galaxy ACE GT-S5839i
Replies
36
Views
171K
E
EL ASA

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 7
    Paras Lehana
    Paras Lehana
    I've found the solution

    Thanks for trying to help me.

    But for guys who are experiencing problems in resetting binary counters, here is the SOLUTION

    Removing Binary Counter using USB Jig

    • Binary can only be removed using USB Jig which can be bought from online shop or local shop if applicable
    • So far only old bootloader (KJ2 and lower) can be used for removing binary binary counter
    • If running newer than KJ2, for example KL3 and above, you need to flash back the old bootloader for the USB Jig to work again
    • Normally, to use USB Jig, just turn off the phone and plug the USB jig. Done
    • Download the attached i9100g-reset-binary-counter.zip and extract to get tar file. Password : mahadirlab-reset-b001 (Credit to Mahadir Ahmad)
    • Using Odin, just replace the PDA file with this provided tar file
    • Do not use PIT file and start the flashing
    • Now you can use the USB Jig just like mentioned above

    -----------------
    Thank Me If You Liked My Work
    View
    1
    Paras Lehana
    Paras Lehana
    I've a Samsung Galaxy S II GT-I9100G. Now, I want to replace it.

    • I've unrooted it.
    • I've bought the USB JIG for GT-19100.
    • Now, I used that jig to reset that counters (3 for me) but it doesn't work - It does proceed to the Download Mode but doesn't do anything.

    Now, my doubts are:

    • WHAT THE HELL SHOULD I DO TO REPLACE IT?
    • Is the USB JIG is different for the G variant?
    • Do I need to root first?
    • Is there anyone with the I9100G who has successfully reset the binary counters?

    AND THE MOST IMPORTANT
    What to do now!

    Information about my Indian I9100G:

    Model Number: GT-I9100G
    Android Version: 2.3.6
    Phone Code: GT-I9100GLKGINU
    Firmware Versions:
    PDA: I9100GXWLA1
    Phone: I9100DDKL1
    CSC: I9100GODDKL1
    Kernel Version: 2.6.35.7
    root@DELL128#2
    View
    1
    Paras Lehana
    Paras Lehana
    abcdjdj said:
    Has anyone tried triangle away on i9100G?:confused:
    Click to expand...
    Click to collapse

    Ya, a lot...but it seems that it doesnt work on it

    Sent from my GT-I9100 using Tapatalk 2
    View

New posts