[KERNEL][ICS][16/04/2012] SnB Ultimate v1.0 [ZRAM][OC 1.7Ghz]

---

SnB Ultimate Kernel

Disclaimer: I am not responsible for damaging your device or voiding your warranty. Use at your own risk

Shaky156 bringing you the first SnB Ultimate kernel for ICS Stock roms
Based on Motleys Asus v9.4.2.21 kernel with alot of optimizations/changes/tweaks for your Transformer Prime
Link to kernel v1.0
Features:
coming soon...


Changelog:

V1.1 Coming soon...

V1.0 Initial Release
- Increased Touchscreen response ( runs @ 60hz now)
- Increased I2c Bus clock rate
- Added support for more socs
- Code clean up including low level assembly code + Even More code clean up
- Set latency allowance
- Pll clock value added (1199.9mhz) (increase of 160mhz)
- Removed 2Ghz mode (For now, will produce too much heat)
- Decreased minimum rate of bus clock (saves battery)
- Increased max rate of the following clocks
  - VDE
  - UART
  - SERIAL
  - 3D/2D GPU Core Clocks!
  - EPP
  - MPE
  - HOST1X
  - SE
- Fallback onto backup plls
- Added another step in frequency (low freq)
- No more cpu spiking to 100% when actual CPU workload @ 10%
- Dynamically Assign bus Id to I2C
- NO MORE BZIP COMPRESSION - Bzip compression = BADzip compression, now using XZ Compression (aka LZMA2 loseless compression) (faster boot times :p)
- optimized Thumbee
- NFC Chip Slow in handling I2C requests, Added in 1ms delay for I2C Operation
- supports/compiled ZRAM
- Improved Thermal Temperature code + Lowered thermal temps
- Improved Ondemand govenor
- Tegra Camera now added as user to emc clock
- More

Download:http://d-h.st/gsV MD5 0a99939a4b6155dcae9e90c9d016b200

Thanks to:
Nvidea & Asus, Motley, raman, Tyler, CekMTL

Link to kernel source Code: https://github.com/Shaky156

Reseved

sounds yummy

---

Waiting

Yes indeed, very very exciting news! Waiting with bated breath...

Very cool, can't wait to possibly damage my device and void my warranty (even more)

Can't wait to try this.

Sent from my EEEPAD using XDA Premium HD app

Just finished some stuff, im compiling and packing now, then will upload, looking @ thermal code, the temps were set wayyy too high, ive lowered it so none of youz burn your hands lol

Kernel now up

Simply flash in CWM? Any other steps/recommendations?

Originally Posted by dagrim1

Simply flash in CWM? Any other steps/recommendations?

Recommendations:
Rooted, busybox, unlocked, use CWM, Always backup!!