Qualcomm mode

---

I seen to remember some getting there computer to see the KIN as a Qualcomm device, but cant find the thread. Anyone remember how, I saw something at another forum I was gonna try since I don't mind bricking my phone.

Sent from my SCH-I510 using XDA

Could you post what your gonna try in the idea thread?

Sure its there, but it probably won't work just wanted to try.

Sent from my SCH-I510 using XDA

response to your qualcomm comment.

---

Originally Posted by kintwofan

Sure its there, but it probably won't work just wanted to try.

Sent from my SCH-I510 using XDA

--
Hey are you talking about when you go to your phone app and call ##77647266488 and then enter the default code 000000.
Followed by selecting the option "field test menu" and then swiping 3 pages to the right and scrolling down untill you see the data service option which lists either Pre 707, Qualcomm, or IS 707. (Your device should already be set to IS 707. But you can change it to Qualcomm.

Hope this helps you :P

No I was talking about when it's plugged into your computer and it's recognized as a Qualcomm device instead of a kin. No one ever seemed to remember and I don't have a kin anymore all its no help now, but I'm thinking about picking one up to play with.... So well see.

Sent from my DROID RAZR using xda app-developers app

Just follow what Zachman690 said and it will go into qualcomm mode.You need the driver i believe in windows,but in linux it will show up if you do the command lsusb.

Originally Posted by cadogan32

Just follow what Zachman690 said and it will go into qualcomm mode.You need the driver i believe in windows,but in linux it will show up if you do the command lsusb.

I understand that but when you connect it to a computer it still says kin two there was a button combo that entered into a Qualcomm mode....like a bootloader and it was recognized by saying something like Qualcomm device.

Unless of course that will do it. I don't have a kin anymore to test this out.

Sent from my DROID RAZR using xda app-developers app

Originally Posted by kintwofan

I understand that but when you connect it to a computer it still says kin two there was a button combo that entered into a Qualcomm mode....like a bootloader and it was recognized by saying something like Qualcomm device.

Unless of course that will do it. I don't have a kin anymore to test this out.

Sent from my DROID RAZR using xda app-developers app

Hmmm....The only thing as far as a button combo that might put it into qualcomm mode is :

Enter Ms Pink Bootstrap mode (aka SBL mode)

Hold L+S+ Power
Prints nothing, enters SBL mode

I don't have windows installed on my pc so can't really try it out.As far as i know changing it in the settings will for sure put it in qualcomm mode.

These were the other key combo's johnkussack figured out:

http://forum.xda-developers.com/show....php?t=1006805

Hope that helps.

Ya I didn't see what I was thinking of there. I wish I had a kin to change modes and see if that did it

Sent from my DROID RAZR using xda app-developers app

qualcomm

---

If you don't mind me asking,what were you planning on trying once you have it set to that?I noticed ebay sells them fairly cheap.I wanted to grab up a couple to tear apart and get the movinand chip off it.Still trying to figure out some ways to access this phone.