★[DISCONTINUED!][PRIMOU-KERNEL][3.0.46][BUILD•7.5]★TITANIUM KERNEL™★Speed!★

---

This Kernel is DISCONTINUED and is NO LONGER SUPPORTED!



**I Do not own the device**

AND


**Overclocking can harm your device!**





READ THIS FIRST-

I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. 
YOU are choosing to make these modifications,
and if you point the finger at me for messing up your device, I will laugh at you.
Don't complain if your device explodes in your hand or vanishes into thin air..

Reporting bugs without logcat is the leading cause of male impotency xD

KERNEL Now Supports CM9,CM10 and Sense!


Ok so lets get started,

Features-

CPU:


Overclock upto 2.016 GHZ
VDD Stats support! Control Voltages -- On the Fly!
Governers: Smartass2 , Lionheart, Ondemand, Performance, Conservative


I/O:


Many Improvements made to EXT4 filesystem
EXT2 & EXT3 mounted as EXT4 (Faster! & better)
Some Misc Patches to improve I/O
Simple I/O Scheduler , Noop (SIO is default)
Cleancache
NOATIME and NODIRATIME mounts set as default
Some I/O Schedulers Tweaked
Max Readahead set to 1024
VFS Cache pressure is set to 20 (Lower the better for mobile devices)
Limit default readahead size for small devices

ARM Specific modifications:


Added Optimized RWSEM ARM Algorithm
Add optimised swahb32() byteswap helper

NET Tweaks:


Stochastic Fair Blue Net Scheduler
Proportional Rate Reduction for TCP - by Google
Some TCP tweaks
CIFS & TUN (VPN) built into the Kernel
Bluetooth Fixes for CM9/CM10




Linux Memory Management:

vmstat updated to Linux Kernel 3.4.4
vmalloc updated to Linux Kernel 3.4.4
oom_kill updated to Linux Kernel 3.4.4
readahead updated to Linux Kernel 3.4.4
shmem updated to Linux Kernel 3.4.4
page_alloc updated to Linux Kernel 3.4.4
page_writeback updated to Linux Kernel 3.1.10


Some other Misc Features:




Sweep to Wake Feature.
Compiled with Linaro-4.6.2 Toolchain
XZ Kernel compression and decompression (Faster boot + better compression/decompression)
Patched up CRC32 Libraries (+Performance)
Makefile Optimizations
memcopy macros and functions
Removed old SHA1 Implementations
Used new SHA1 Implementation (Said to improve boot speed)
VM Ratios Tuned up for Best performance!
GENTLE FAIR SLEEPERS Disabled
Disabled debugging stuff and other unneeded stuff in defconfig (--size , ++speed)
Fixed Mono Stereo Output (maxwen)
Implemented Lots of other patches & cherry-picks (Some from mainline Linux Kernel)



Scroll down for changelogs and download links-




INDEX

Changelogs

Downloads



My HTC ONE V KERNEL SOURCES.

Reserved----

---

DOWNLOAD LINKS

-- DO NOT USE THE CM KERNEL -- ON ANY CM BUILD LATER THAN 24/10 ---

Download TITANIUM KERNEL BUILD 7.5 HOTFIX*(Extract the zip and look at the README, all Kernels are in the zip)

*********** Fixed all flashing issues *************

-----------------OLDER DOWNLOADS--------------------------- NOT RECCOMENDED


Download TITANIUM KERNEL BUILD 7.5 (Extract the zip and look at the README, all Kernels are in the zip)

Download TITANIUM KERNEL BUILD 7 (Extract the zip and look at the README, all Kernels are in the zip)

Download TITANIUM KERNEL BUILD#6 SENSE

Download TITANIUM KERNEL BUILD#6 CM10

Download TITANIUM KERNEL BUILD#5

Download TITANIUM KERNEL BUILD#4

Download TITANIUM KERNEL BUILD#3 ( 2.016Ghz Max frequency)

Download TITANIUM KERNEL BUILD#3 ( 1.5Ghz Max frequency)

Download TITANIUM KERNEL TESTKEYS 1

Download TITANIUM KERNEL TESTKEYS 1.1

Download TITANIUM KERNEL TESTKEYS 1.2

Download TITANIUM KERNEL BUILD#1

Download TITANIUM KERNEL BUILD#2


Extract the zip and flash the boot.img via fastboot.

Changelogs

---

Changelogs:

Changelog Testkeys 1.1



1] Added SmartassV2 Governer (Testing required)
2] Tuned CFS Parameters
3] Some minor changes in Kernel source.

Changelog Testkeys 1.2

1] Patched to Linux Kernel 3.0.30 (Thanks to mdeejay)
2] Some mm tweaks
2] Added Cpufreq bins upto 1.9Ghz (OC is WIP)

Changelog BUILD•1

1] Using Tweaked SLUB Memory Allocator
2] Disabled Perflock
3] Using only EXT4 now (Disabled EXT2 and EXT3)
4] SmartassV2 and Lagfree governers!
5] Using XZ Compression (Ported for One V since XZ files were broken)
6] CIFS and TUN modules loaded on boot

Changelog BUILD •2

1] Added support to run init.d support on boot
2] Added support for fudgeswap. (Android Lowmemorykiller will now control SWAP)
3] ZRAM module support!
4] Removed CIFS module, unless I am told to add it back again.
5] TUN is now built into the Kernel.
6] Readahead is set as a kernel parameter , readahead size set according to disk size.
7] Used lots of Makefile Optimizations!
8] lowmemorykiller Tweaks.
9] Using memory copy macros and functions.

Lots of other changes which are too complex to explain, you can see more about it here

Changelog BUILD•3

1] Overclock upto 2.016Ghz (HELL YEAH! Finally!)
2] CIFS and TUN built into the Kernel
3] Added SIO IO Scheduler (Updated)
4] Smartass2 (Tuned) and LIONHEART Governer
5] A few ARM specific changes
6] Optimized CRC32 Algorith which is essential in many Kernel mechanics.
7] Optimized ARM RWSEM Algorithm
8] Small Tweak to conservative Governer
9] Tiny RCU Enabled
10] Used new Sha-1 Implementation (Cherry-picked)
11] New Writeback feature backported from 3.1
12] Many small Patches and changes which are there on my github
13] Limited boot-up speed to 1Ghz for stability purposes

Changelog - Build•4


1] Device will always boot at 1Ghz.
2] Patched to Linux Kernel 3.0.35

Changelog - Build•5


1] Patched to Linux Kernel 3.0.36
2] Enabled JRCU
3] VDD Stats support (Control Voltages!)
4] Stochastic Fair Blue Net Scheduler
5] sched: Enabled ARCH Power
6] Updated shmem -> Linux Kernel 3.4.4
Updated vmalloc -> Linux Kernel 3.4.4
Updated vmstat -> Linux Kernel 3.4.4
Updated readahead -> Linux Kernel 3.4.4
Updated oom_kill -> Linux Kernel 3.4.4
Updated lowmemorykiller -> Linux Kernel 3.4.4
Updated page_writeback -> Linux Kernel 3.1.10
Updated page_alloc -> Linux Kernel 3.4.4
Updated cleancache -> Linux Kernel 3.4.4
Updated fs/fs-writeback -> Linux Kernel 3.4.4
7] Hack for Fsync Control (Ezeekel)
8] Added improvements/tweaks to EXT4
9] Increased GPU memory Allocation
10] Proportional Rate Reduction for TCP - by Google

Changelog - Build•6


1] Support for CM10/Sense Ramdisks
2] Patched to Linux Kernel 3.0.44
3] There might be performance issues with CM10, because I need to make specific changes for CM10 which I will do in future.

Changelog - Build•7


1] Added CM9 Support ( KERNEL NOW SUPPORTS SENSE, CM9, CM10!)
2] Patched to Linux Kernel 3.0.46
3] Fixed Bluetooth issue on CM9/CM10
4] Proper PMEM Allocations on CM9/CM10
5] Kicked off RAM Console {You should get more available RAM}
6] Fix Speaker Mono Stereo bug {maxwen}

Changelog - Build•7.5


1] Fixed CM9 Kernel - booting issue
2] More Bluetooth Fixes (CM)
3] Added Sweep to Wake feature (maxwen) (Only for CM ROMs for now)
4] Added BT LPM driver.
5] Stability Fixes for CM9/CM10

FAQ-

---

Please read this FAQ before asking any questions-

1) I got sudden reboot , Force Close!
Recreate the problem and post a logcat or proc/last_kmesg

2) I have issues of Signal drop
Its not related to the kernel

3) Overclock:

Anything above 1.5Ghz can be dangerous and unstable, however people have reported stable 1.7-1.8Ghz config.
Nothing above 1.5Ghz is reccomended.

4) Best Governer for battery: Conservative
Best Governer for Battery + Good performance: Lionheart
Best Governer for JUICE aka Performance - Smartass2
I will not add any more governers and bloat the Kernel.

5) If you have any issues give me a logcat

6) DO NOT USE ANY init.d scripts!!!!!!

7) Can you please add X or Y feature? Depends upon what it is and how is it useful.

8) Battery issues? Make sure no app is constantly waking up the phone and preventing the phone from going into deep sleep.

Also thanks to than33 , hlavik, and stubbakat for experimentation on their phones!

Sorry for my post,i will try install

Originally Posted by nguyenhonganh

Sorry for my post,i will try install

Use fastboot and flash zImage .


Sent from my GT-I9003 using xda premium

Where is ur sources? Please release.. do u have github?

Sent from my Sensation 4G using xda premium

Originally Posted by xXxVenomxXx

Where is ur sources? Please release.. do u have github?

Sent from my Sensation 4G using xda premium

Github link,

https://github.com/AdiPat/HTC_OneV


No testers?

Ill test. should I flash it like

fastboot flash boot boot.img?

assuming that boot.img is your kernel

ktool is for s2 only right?

Sent from my HTC One V using Tapatalk 2

Originally Posted by gonemad02

Ill test. should I flash it like

fastboot flash boot boot.img?

assuming that boot.img is your kernel

ktool is for s2 only right?

Sent from my HTC One V using Tapatalk 2

Kernel is zImage .. And you can flash it via Fastboot.

fastboot boot zImage
[For testing]

fastboot flash zimage zImage
[for permanent flash]

Sent from my GT-I9003 using xda premium